Canon printer MAXIFY MB2320 User Manual

							When the Deep Cleaning  dialog box opens, select the ink group for which deep cleaning is to be
performed.
Click  Initial Check Items  to display the items you need to check before performing deep cleaning.3.
Execute deep cleaning
Make sure that the printer is on and then click  Execute.
Click  OK when the confirmation message appears.
Print head deep cleaning starts.
4.
Complete deep cleaning
The  Nozzle Check  dialog box opens after the confirmation message.
5.
Check the results
To check whether the print quality has improved, click  Print Check Pattern. To cancel the check
process, click  Cancel.
Important
•
Deep Cleaning  consumes a larger amount of ink than  Cleaning.
Cleaning the print head frequently will rapidly deplete your printer's ink supply. Consequently, perform
cleaning only when necessary.
Note
•
If there is no sign of improvement after  Deep Cleaning, turn off the printer, wait 24 hours, and then
perform  Deep Cleaning  again. If there is still no sign of improvement, the ink may have run out or the
print head may be worn. For details on the remedial action to be taken, see "
Ink Is Not Ejected ."
Related Topic
Use Your Computer to Print a Nozzle Check Pattern
221 
						

							Aligning the Print Head Position from Your ComputerPrint head alignment corrects the installation positions of the print head and improves deviated colors and
lines.
This printer supports two head alignment methods: automatic head alignment and manual head alignment.
Normally, the printer is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, 
perform manual head alignment .
The procedure for performing automatic print head alignment is as follows:
 Print Head Alignment
1.
Open the printer driver setup window
2.
Click  Print Head Alignment  on the Maintenance  tab
The  Start Print Head Alignment  dialog box opens.
3.
Load paper in the printer
Load one sheet of A4 size or Letter size plain paper into the cassette 1.
Important
•
The cassette 2 is not available for the print head alignment procedure. Be sure to load paper in
the cassette 1.
Note
•
The number of sheets to be used differs when you select the manual head alignment.
•
If the cassette paper information registered on the printer is not set to A4 size and plain paper, an error may occur. For instructions on what to do if an error occurs, see "
Paper setting for
Printing ."
For details about the cassette paper information to be registered on the printer, see the
following:
•
Paper Settings on the Printer Driver and the Printer (Media Type)
•
Paper Settings on the Printer Driver and the Printer (Paper Size)
4.
Execute head alignment
Make sure that the printer is on and click  Align Print Head.
Follow the instruction in the message.
Important
•
Do not open the operation panel while printing is in progress.
Note
•
Wait until printing ends before performing other operations. Printing takes about 3 to 4 minutes to complete.
222 
						

							Note•
To print and check the current setting, open the Start Print Head Alignment dialog box, and click Print
Alignment Value .223 
						

							Aligning the Print Head Position Manually from Your ComputerPrint head alignment corrects the installation positions of the print head and improves deviated colors and
lines.
This printer supports two head alignment methods: 
automatic head alignment  and manual head alignment.
Normally, the printer is set for automatic head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
The procedure for performing manual print head alignment is as follows:
 Print Head Alignment
1.
Open the printer driver setup window
2.
Click  Custom Settings  on the Maintenance  tab
The  Custom Settings  dialog box opens.
Note
•
If the printer is off or if communication between the printer and the computer is disabled, an
error message may appear because the computer cannot collect the printer status.
If this happens, click  OK to display the most recent settings specified on your computer.
3.
Switch head alignment to manual
Check the  Align heads manually  check box.
4.
Apply the settings
Click  OK and when the confirmation message appears, click  OK.
5.
Click  Print Head Alignment  on the Maintenance  tab
The  Start Print Head Alignment  dialog box opens.
6.
Load paper in the printer
Load two sheets of A4 size or Letter size plain paper into the cassette 1.
Important
•
The cassette 2 is not available for the print head alignment procedure. Be sure to load paper in
the cassette 1.
Note
•
If the cassette paper information registered on the printer is not set to A4 size and plain paper, an error may occur. For instructions on what to do if an error occurs, see "
Paper setting for
Printing ."
For details about the cassette paper information to be registered on the printer, see the
following:
224 
						

							•Paper Settings on the Printer Driver and the Printer (Media Type)•
Paper Settings on the Printer Driver and the Printer (Paper Size)
7.
Execute head alignment
Make sure that the printer is on and click  Align Print Head.
Follow the instruction in the message.
Important
•
Do not open the operation panel while printing is in progress.
8.
Check the printed pattern
Enter the numbers of the patterns with the least noticeable streaks in the associated boxes. Even if the patterns with the least noticeable streaks are clicked in the preview window, their numbers
are automatically entered in the associated boxes.
When you have entered all the necessary values, click  OK.
Note
•
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical
streaks.
(A) Least noticeable vertical streaks
(B) Most noticeable vertical streaks
9.
Confirm the displayed message and click  OK
The second pattern is printed.
Important
•
Do not open the operation panel while printing is in progress.
225 
						

							10.Check the printed pattern
Enter the numbers of the patterns with the least noticeable stripes or streaks in the associated boxes. Even if the patterns with the least noticeable stripes or streaks are clicked in the preview window, their
numbers are automatically entered in the associated boxes.
When you have entered all the necessary values, click  OK.
Note
•
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable
horizontal stripes.
(A) Least noticeable horizontal stripes
(B) Most noticeable horizontal stripes
•
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks.
(A) Least noticeable vertical streaks
(B) Most noticeable vertical streaks
Note
•
To print and check the current setting, open the  Start Print Head Alignment dialog box, and click
Print Alignment Value .
226 
						

							Use Your Computer to Print a Nozzle Check PatternThe nozzle check function allows you to check whether the print head is working properly by printing a
nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print.
The procedure for printing a nozzle check pattern is as follows:
 Nozzle Check
1.
Open the printer driver setup window
2.
Click  Nozzle Check  on the Maintenance  tab
The  Nozzle Check  dialog box opens.
Click  Initial Check Items  to display the items that you need to check before printing the nozzle check
pattern.
3.
Load paper in the printer
Load one sheet of A4 size or Letter size plain paper into the cassette 1.
Important
•
The cassette 2 is not available for the nozzle check pattern printing. Be sure to load paper in the
cassette 1.
Note
•
If the cassette paper information registered on the printer is not set to A4 size and plain paper, an error may occur. For instructions on what to do if an error occurs, see "
Paper setting for
Printing ."
For details about the cassette paper information to be registered on the printer, see the
following:
•
Paper Settings on the Printer Driver and the Printer (Media Type)
•
Paper Settings on the Printer Driver and the Printer (Paper Size)
4.
Print a nozzle check pattern
Make sure that the printer is on and click  Print Check Pattern.
Printing of the nozzle check pattern begins.
Click  OK when the confirmation message appears.
The  Pattern Check  dialog box opens.
5.
Check the print result
Check the print result. When the print result is normal, click  Exit.
If the print result is smudged or if there are any unprinted sections, click  Cleaning to clean the print
head.
227 
						

							Related Topic
Cleaning the Print Heads from Your Computer
228 
						

							Cleaning the Machine
Cleaning the Exterior of the Machine
Cleaning the Platen Glass and Document Cover
Cleaning the ADF (Auto Document Feeder)
Cleaning the Paper Feed Roller
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
Cleaning the Pad in the Cassette
229 
						

							Cleaning the Exterior of the MachineBe sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently.Smooth out wrinkles on the cloth if necessary before cleaning.
Important
•
Be sure to turn off the power and unplug the power cord before cleaning the machine.
•
The power cannot be turned off while the machine is sending or receiving a fax, or when unsentfaxes are stored in the machine's memory. Make sure if the machine completed sending or
receiving all the faxes before unplugging the power cord.
•
The machine cannot send or receive faxes when the power is turned off.
•
If the power cord is unplugged, the date/time settings will be reset and all documents stored in the machine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive before unplugging the power cord.
•
Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as notto scratch the surface. Paper tissue powder or fine threads may remain inside the machine and cause problems such as print head blockage and poor printing results.
•
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to cleanthe machine, as this may cause a malfunction or damage the surface of the machine.
•
When cleaning the touch screen, be sure to use a soft cloth, such as eyeglasses cleaning cloth, to wipe
off dirt on the surface. Do not apply excessive pressure. Never use cleaners containing organic
solvents to wipe the touch screen.
230