Canon printer imageCLASS MF236n User Manual

							Checkingwhetherthesettingsarecorrect
Make sure that the Remote UI screen can be displayed with your computer by using the IPv6 address of the machine. 
StartingRemoteUI(P.450)
Usingtheoperationpanel IPv6 settings can also be accessed from  in the  Screen. 
IPv6Settings(P.477)
LINKS
SettingIPv4Address(P.337)
ViewingNetworkSettings(P.344)
Network
343             
						

							ViewingNetworkSettings
1469-06H
ViewingIPv4Settings(P.344)
ViewingIPv6Settings(P.344)
ViewingtheMACAddressforWiredLAN(P.345)
ViewingtheMACAddressandInformationforWirelessLAN(MF249dw/MF247dw)(P.345)
	The IP address is not correctly  con4gured if it is displayed as "0.0.0.0".
	 Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP
address is correctly  con4gured. This problem can be solved by setting a certain interval before the machine
starts communicating. 
SettingaWaitTimeforConnectingtoaNetwork(P.376)
	 You can print a list of the current network settings. 
UserDataList(P.621)
Viewing IPv4 Settings
      Select the setting to view
Viewing IPv6 Settings
      Select the setting to view
Network
344                   
						

							Viewing the MAC Address for Wired LAN
1TapintheScreen.2Tap.
	If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap .  Setting
theSystemManagerPIN(P.397)
3Tap.
Viewing the MAC Address and Information for Wireless LAN (MF249dw /
MF247dw)
1TapintheScreen.2Tap.
	 If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap . Setting
theSystemManagerPIN(P.397)
3Tap.
	 If the  message is displayed, tap .
	 If the  message is displayed, tap .
4Readthemessagethatisdisplayed,andtap.5Tap.6Selectthesettingtoview.Network
345       
						

							ViewingWEPandWPA/WPA2-PSKinformation
1Tap .2Con4rm and tap the current security setting.
	 If the security settings are not  con4gured,  is displayed.3Select the setting to view.
 WEP WPA/WPA2-PSK     
	  and  can be viewed from . Press  
   and select the setting to view.
LINKS
ConnectingtoaWirelessLAN(MF249dw/MF247dw)(P.319)
SettingIPv4Address(P.337)
SettingIPv6Addresses(P.340)
Con4gurLng DNS(P.377)
Network
346             
						

							Con4gurLngtheMachineforPrintingorFaxingfroma
Computer
1469-06J
When using the machine as a network printer or a PC-to-fax machine, you can  con4gure the protocols and ports used
for printing and create a print server for the machine. Before  con4guring the machine for printing or faxing from a
computer, perform the basic setup procedures, including the printer driver installation. For more information, see "MF Driver Installation Guide."
	 Printing protocols are rules for delivering document data created on a computer to the machine, and can be
selected according to the printing purpose or the network environment.
	 Ports are gateways for passing document data from a computer to the printer. Incorrect port settings are
often the cause when documents cannot be printed from a network computer.
Network
347 
						

							Con4gurLngPrintingProtocolsandWSDFunctions
1469-06K
Con4gure  the protocols that are used for printing documents from a networked computer. The protocols supported
by the machine include LPD, RAW, and WSD (Web Services on Devices).
To change protocols' port numbers, see ChangingPortNumbers(P.409) .
1StarttheRemoteUIandlogoninSystemManagerMode.StartingRemote
UI(P.450)2Click[Settings/[email protected][NetworkSettings@[TCP/IP[email protected]4gure printingprotocols.Network
348       
						

							Con4gurLngLPDorRAW1Click [Edit] in [LPD Print Settings] or [RAW Print Settings].2Con4gure the settings as necessary.
[UseLPDPrinting@
Select the check box to print via LPD. When not using LPD printing, clear the check box.
[UseRAWPrinting@
Select the check box to print via RAW. When not using RAW printing, clear the check box.
3Click [OK].
Con4gurLng WSD
1Click [Edit] in [WSD Settings].2Con4gure the settings as necessary.
Network
349 
						

							[UseWSDPrinting@
Select the check box to print via WSD. When not using WSD printing, clear the check box.
[UseWSDBrowsing@
Select the check box to obtain information about the machine from a computer via WSD. This check box is automatically selected when the [Use WSD Printing] check box is selected.
[UseWSDScanning@
Available for Windows Vista/7/8/10, WSD scanning enables you to scan documents to a computer without
installing the scanner driver. Select the check box to scan documents via WSD. When not using WSD
scanning, clear the check box.
[UseComputerScanning@
Select the check box to use WSD scanning by operating the machine with the operation panel. This check
box can only be selected when the [Use WSD Scanning] check box is selected. To perform scanning, tap  and specify a WSD-connected computer as a scan destination. ( 
Scanningfromthe
Machine(P.234) ).
[UseMulticastDiscovery@
Select the check box to set the machine to reply to multicast discovery messages. If the check box is cleared, the machine stays in sleep mode even when multicast discovery messages are  5owing on the
network.
3Click [OK].Usingtheoperationpanel
	 LPD, RAW, and WSD settings can also be accessed from  in the  Screen.
LPDPrintSettings(P.479)
RAWPrintSettings(P.479)
WSDSettings(P.479)
SettingupWSDnetworkdevicesonWindowsVista/7/8/10
	 The WSD printer and scanner can be added from the printer folder. Open the printer folder ( 
Displaying
thePrinterFolder(P.669) ) 
 click [Add a device] or [Add a printer] and follow the on-screen instructions.
For more information about how to install MF Drivers for the WSD network printer, see "MF Driver Installation Guide."
LINKS
Con4gurLng PrinterPorts(P.351)
Network
350                   
						

							Con4gurLngPrinterPorts
1469-06L
Printing errors can occur when the IP address of the machine has been changed, or when a printer has been added via
the Windows printer folder. These errors are typically caused by incorrect printer port settings. For example, an incorrect port number or port type may have been  speci4ed. In such situations, your attempt to print fails because the
document data cannot reach the machine. To  4x this type of problem,  con4gure the printer port settings on the
computer.
To perform the following procedure, log on to your computer with an administrator account.
1Opentheprinterfolder.DisplayingthePrinterFolder(P.669)2Right-clickyourprintericonandclick[Printerproperties@(or[Properties@).3Clickthe[Ports@taband con4guretherequiredsettings.Network
351    
						

							AddingaportIf the IP address of the machine has been changed, add a new port. Adding a port is also an effective solutionwhen an incorrect port type was selected in the Windows printer folder during the printer driver installation.
1Click [Add Port].2Select [Canon MFNP Port] in [Available port types] and click [New Port].3Click [Auto Detect], select the machine when it is detected, and click [Next].
Ifthemachineisnotdetected
Click [Refresh]. If the problem persists, click [IP address] or [MAC address], enter the IP address or MAC address of the machine ( 
ViewingNetworkSettings(P.344) ), and then click [Next].
Network
352