Canon printer imageCLASS MF236n User Manual

							Custom 1
Custom 2
Scan -> PC2 Off
USB Connection Color Scan
B&W Scan
Custom 1
Custom 2
Network Connection Color Scan
B&W Scan
Custom 1
Custom 2
 
Con4rm Destination
Scan -> PC1
Scan -> PC2
Setting Menu List
513 
						

							PrinterSettings
1469-094
 All the settings about the printer are listed with short descriptions. Defaultsettings are marked with a dagger (
).Asterisks( *
)
	 Settings marked with " *1
" are only available for the MF249dw / MF247dw.
	 Settings marked with " *2
" have different defaults depending on the country or region of purchase.
Priorityofsettings 	 If a print setting is  speci4ed both from the printer driver and the operation panel of the machine, the
speci4cation  from the printer driver overrides that from the operation panel. The  speci4cation from the
operation panel becomes effective in some  speci4c cases, such as when performing PCL printing and
printing from UNIX or other operating system that does not support printer drivers.
ActionWhenPaperSizeMismatch(P.514)
MobilePrintHalftones(P.515)
Copies(P.515)
2-SidedPrinting(P.515)
DefaultPaper(P.516)
PrintQuality(P.516)
Layout(P.517)
Timeout(P.518)
PCL(P.518)
Action When Paper Size Mismatch
Set whether printing goes ahead if a paper size other than the size loaded in the paper source is selected. You can also
set the machine not to go ahead with printing and instead display an alert message. 
WhenanErrorMessage
Appears(P.550)
Force Output
Display Error
Setting Menu List
514                               
						

							      Select  or
 
 
Mobile Print Halftones 
Select the image processing when printing from a mobile device. Select  for photos and illustrations, and  for mostly text documents for more attractive printouts.
Gradation
Error Diffusion
      Select  or 
 
Copies  *1
Set the number of copies to print.
1 to 999
      Set the number of copies to print    
2-Sided Printing  *1
Select whether to make 2-sided printouts.
Off
On
      Select  or   
Setting Menu List
515 
						

							Default Paper *1
Use this item to specify the paper size. 
Paper(P.650)
      Select the paper size  
Print Quality
You can change settings related to print quality.
Density *1

Adjust the toner density.
17Levels
 
FineAdjust High
17 Levels
Medium 17 Levels
Low 17 Levels	 The settings  speci4ed for  are disabled when  is enabled.
        Adjust the density    
TonerSave
You can save toner consumption. Select  when you want to check the layout or other appearance
characteristics before proceeding to  4nal printing of a large job.
Off
On
        Select  or   
Setting Menu List
516    
						

							SpecialPrintMode*1
Select  if a printed bar code is unreadable, or  if print results are partially
faded.
Off
Special Settings 1
Special Settings 2
        Select  or  
 
Resolution *1
Specify the resolution to be used for print data processing.
1200 dpi
600 dpi
        Select  or  
 
DensityFineAdjustment *1

Finely adjust the density. You can specify this setting only when  is selected in .
-1 to 0 to 1
        Specify the density
 
Layout  *1
Specify the page layout settings such as binding position. BindingLocation
If you are binding the printouts with a binding tool such as a stapler, use this item to specify whether to bind onthe long or short edge.
Long Edge
Short EdgeSetting Menu List
517 
						

							        Select  or  
 

Specify this to bind on the long edge of paper.

Specify this to bind on the short edge of paper.
Timeout  *1
 
Set the time period after which the current print job is automatically canceled in the case of a print data reception
interruption.
5 to 15 to 300 (sec.)
      Set the time period    
PCL  *1
Specify the PCL printing settings such as page layout and print quality. PaperSave
Select whether to save paper by not outputting blank pages in documents. By selecting , the machine will
not output blank pages. To output all your document data when printing, including any blank pages that you have inserted in your document, select .
Off
OnSetting Menu List
518 
						

							        Select  or   
Orientation
Select  (vertical orientation) or  (horizontal orientation) for the page orientation.
Portrait
Landscape
        Select  or   
FontNumber
Specify the font to use by selecting a corresponding font ID number. You can print the PCL font list with fontsamples from the operation panel. 
PCLFontList(MF249dw/MF247dw)(P.618)
0 to 54
        Select the font number
   
PointSize
Set the font size in points, adjustable in 0.25 increments. You can specify this setting only when a proportionally-
spaced scalable font is selected in .
4.00 to 12.00 to 999.75 (point)
        Specify the point size    
Pitch
Set the font pitch, or cpi (characters per inch), adjustable in 0.01 increments. You can specify this setting only
when a  4xed-pitch  scalable font or a bitmap font is selected in .
0.44 to 10.00 to 99.99 (cpi)
Setting Menu List
519    
						

							        Specify the pitch value    
FormLines*2
Set the number of lines printed on one page from 5 to 128. This setting is automatically changed according to
the settings  speci4ed in  and .
5 to 60 to 128 (lines)
        Specify the number of lines
   
CharacterCode
Select the character code that is most suited for the computer you send print data from. The  speci4ed setting is
ignored when the character code is controlled by the font  speci4ed in .
DESKTOP
ISO4
ISO6
ISO11
ISO15
ISO17
ISO21
ISO60
ISO69
ISOL1
ISOL2
ISOL5
ISOL6
LEGAL
MATH8
MCTEXT
MSPUBL
PC775 PC8
PC850
PC852
PC8DN
PC8TK
PC1004
PIFONT
PSMATH
PSTEXT
ROMAN8
VNINTL
VNMATH
VNUS
WIN30
WINBALT
WINL1
WINL2
WINL5
        Select the character code  
CustomPaper
Select whether to set a custom paper size. Select  to set the dimensions of the paper in  and
.
Setting Menu List
520 
						

							Off
On
        Select  or   
UnitofMeasure*2
Select the unit of measurement to use to set a custom paper size.
Millimeters
Inches
        Select  or
 
 
Xdimension
Specify the horizontal dimension (short edge) of the custom paper.
3 to 8 1/2 (inches) or 77 to 216 (mm)
        Specify the dimension    
Ydimension
Specify the vertical dimension (long edge) of the custom paper.
5 to 14 (inches) or 127 to 356 (mm)
        Specify the dimension    
AppendCRtoLF
Select whether to append a carriage return (CR) when the machine receives a line feed code (LF). If  is
selected, the print position moves to the beginning of the next line when the machine receives an LF code. If  is selected, the print position moves to the next line, just under the received LF code.
Setting Menu List
521 
						

							Yes
No
        Select  or   
EnlargeA4PrintWidth
Select whether to expand the width of the printable area of A4 size paper in portrait orientation to that of LTR size.
Off
On
        Select  or   
Halftones
You can select the printing method to reproduce halftones (the intermediate range between the lighter anddarker areas of an image) for optimal image quality. For each document, you can make settings by type of
image.
Text
Color Tone
Gradation
Resolution
 
Graphics Color Tone
Gradation
Resolution
 
Image Color Tone
Gradation
Resolution
Setting Menu List
522