Canon printer imageCLASS MF236n User Manual

							NetworkSettings
1469-08W
 All the settings about the network are listed with short descriptions. Default
settings are marked with a dagger (
).
IfascreenforenteringaPINisdisplayed Enter the PIN with the numeric keys and tap . 
SettingtheSystemManagerPIN(P.397)
Asterisks( *
)
Settings marked with an asterisk ( *
) are only available for the MF249dw / MF247dw.
SelectWired/WirelessLAN(P.473)
WirelessLANSettings(P.473)
DirectConnectionSettings(P.475)
TCP/IPSettings(P.476)
SNMPSettings(P.480)
DedicatedPortSettings(P.482)
WaitingTimeforConnectionatStartup(P.482)
EthernetDriverSettings(P.482)
IEEE802.1XSettings(P.482)
InitializeNetworkSettings(P.483)
Select Wired/Wireless LAN  *
When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using the following ). 
SelectingWiredLANorWirelessLAN(MF249dw/MF247dw)(P.317)
Wired LAN
Wireless LAN
Wireless LAN Settings  *
Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the
setting for saving power consumption. See "Getting Started" 
ManualsIncludedwiththeMachine(P.660) .
SSIDSettings
Select to  con4gure  a wireless connection by specifying information including an SSID or a network key by
inputting manually from the operation panel.
SelectAccessPoint Wireless LAN routers that can access the machine are automatically located, so you can select from the list.You must manually enter a network key, such as a WEP key or a PSK. 
SettingUpConnectionbySelecting
aWirelessRouter(P.326)
Setting Menu List
473                                           
						

							EnterManuallySelect to  con4gure  a wireless connection by manually entering an SSID. By using this method, you can specify
authentication and encryption settings in detail. 
SettingUpConnectionbySpecifyingDetailed
Settings(P.329)
SecuritySettings
None
WEP
Open System
Select WEP Key: 1/2/3/4Edit WEP Key
Shared Key Select WEP Key: 1/2/3/4
Edit WEP Key
WPA/WPA2-PSK Auto
AES-CCMP
WPSPushButtonMode
Select to automatically  con4gure a wireless connection by using the button on a WPS wireless router. Setting
UpConnectionUsingWPSPushButtonMode(P.321)
WPSPINCodeMode
Select to  con4gure  a wireless connection by entering a PIN code for a WPS wireless router. SettingUp
ConnectionUsingWPSPINCodeMode(P.323)
PowerSaveMode
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
Off
On
      Read the displayed message
   Select  or   
WirelessLANInformation
Select to view the current wireless LAN settings. ViewingNetworkSettings(P.344)
MAC Address
Wireless LAN Status
Latest Error Information
Channel
SSID Settings
Security Settings
Power Save Mode
Setting Menu List
474             
						

							Direct Connection Settings *
Con4gure  settings for Direct Connection. After  con4guring settings, you can connect to the machine directly and
wirelessly from a mobile device even without an access point or wireless LAN router.
UseDirectConnection
Select whether to use Direct Connection. You can select  or  when  is set to  while the Wirelss LAN connection is enabled. 
MakeDirectConnection(AccessPointMode)(MF249dw/MF247dw)(P.291)
Off  
 
On Direct Connection Only
Wireless LAN/Direct Conn. (Auto Switch)
        
 Select  or  when  is selected in   
   
TimeUntilDirectConnectionTermination
Set the time that the machine exits Direct Connection mode automatically. Can be set when  is . Once the time set in  is reached,
communication between the machine and a mobile device is discontinued. Before starting a large print job, you
should set a long delay time or set the delay time to  (Off).
0 (Off)
1 to 10
 to 60 (min.)
       
 Set time to disconnect    
AccessPointModeSettings
To make detailed settings, such as authentication and encryption, enter an SSID and network key to  con4gure
settings. Can be set when  is .
UseCustomSSID
Off
On
SSID (1-20 Characters)
 
UseCustomNetworkKey Off
On
Network Key (10 Char.)
Setting Menu List
475    
						

							       
Select  or     Set SSID Settings or Network
Key Settings 
   
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
IPv4Settings
Specify settings for using the machine in an IPv4 network.
IPAddressSettings Con4gure  the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP
network. 
SettingIPv4Address(P.337)
AutoAcquire
Select Protocol
Off
DHCP
BOOTP
RARP
Auto IP Off
On
 
ManuallyAcquire IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway Address: 0.0.0.0
 
CheckSettings Auto Acquire
IP Address
Subnet Mask
Gateway Address
PINGCommand
Select to check that the machine is connected to a computer over a network. 
TestingtheNetwork
Connection(P.339)
DNSSettings Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. 
Con4gurLng DNS(P.377)
DNSServerSettings
Primary DNS Server: 0.0.0.0
Secondary DNS Server: 0.0.0.0
 
DNSHostName/DomainNameSettings Host Name
Setting Menu List
476          
						

							Domain Name
 
DNSDynamicUpdateSettings Off
On
DNS Dyn. Updt. Intrvl. 0 to 24
 to 48 (hr.)
mDNSSettingsSpecify settings for using DNS functions without DNS servers. 
Con4gurLng DNS(P.377)
Off
 
On
mDNS Name
DHCPOptionSettings Select whether to acquire the host name and whether to use the dynamic update function via the DHCP
options when DHCP is enabled. 
Con4gurLng DNS(P.377)
AcquireHostName
Off
On
 
DNSDynamicUpdate Off
On
 
AcquireSMTPServerAddress  *
Off
On
 
AcquirePOPServerAddress  *
Off
On
IPv6Settings
Specify settings for using the machine in an IPv6 network.
UseIPv6 Enable or disable IPv6 in the machine. You can also view the current settings. 
SettingIPv6
Addresses(P.340)
Off  
 
On

CheckSettings Link-Local Address
Pre4x  LengthSetting Menu List
477          
						

							StatelessAddressSettingsEnable or disable stateless addresses.  
SettingIPv6Addresses(P.340)
Off

On  
 
CheckSettings Stateless Address
Pre4x  Length
UseDHCPv6
Enable or disable the stateful address that is acquired via DHCPv6. 
SettingIPv6Addresses(P.340)
Off  

On

CheckSettings Stateful Address
Pre4x  Length
DNSSettings
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. 
Con4gurLng DNS(P.377)
DNSHostName/DomainNameSettings
Use IPv4 Host/Domain
Off Host Name
Domain Name
On
 
DNSDynamicUpdateSettings Off
On
Register Manual Address Off
On
Register Stateful Address Off
On
Register Stateless Address
Off
On
DNS Dynamic Update Interval 0 to 24
 to 48 (hr.)
Setting Menu List
478          
						

							mDNSSettingsSpecify settings for using DNS functions without DNS servers. 
Con4gurLng DNS(P.377)
Off
 
On
Use IPv4 Name for mDNS
Off mDNS Name
On
LPDPrintSettings
Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. 
Con4gurLng PrintingProtocolsandWSDFunctions(P.348)
Off
On
RAWPrintSettings
Enable or disable RAW, a Windows  speci4c printing protocol. Con4gurLng PrintingProtocolsandWSD
Functions(P.348)
Off
On
WSDSettings
Enable or disable automatic browsing and acquiring information for the printer or scanner by using the WSD
protocol that is available on Windows Vista/7/8/10/Server 2008/Server 2012. 
Con4gurLng PrintingProtocols
andWSDFunctions(P.348)
WSDPrintSettings
Use WSD Print
Off
On
Use WSD Browsing Off
On
 
WSDScanSettings Use WSD Scan
Off
On
Use Computer Scan Off
On
 
UseMulticastDiscovery Off
On
Setting Menu List
479             
						

							UseHTTP
Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote
UI, WSD printing, or printing with Google Cloud Print. 
DisablingHTTPCommunication(P.423)
Off
On
PortNumberSettings
Change port numbers for protocols according to the network environment. ChangingPortNumbers(P.409)
LPD 1 to 515
 to 65535
 
RAW 1 to 9100
 to 65535
 
WSDMulticastDiscovery 1 to 3702
 to 65535
 
HTTP 1 to 80
 to 65535
 
POP3  *
1 to 110
 to 65535
 
SMTP  *
1 to 25
 to 65535
 
SNMP 1 to 161
 to 65535
MTUSize
Select the maximum size of packets the machine sends or receives. ChangingtheMaximumTransmission
Unit(P.375)
1300
1400
1500
SNMP Settings
Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software.
MonitoringandControllingtheMachinewithSNMP(P.386)
SNMPv1Settings
Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to
Management Information Base (MIB) objects.
Off

Setting Menu List
480             
						

							On
Community Name 1 SettingsOff
On
Community Name
MIB Access Permission
Community Name 2 Settings Off
On Community Name
MIB Access Permission
Dedicated Community Settings Off
On
        
 Select  or   Specify settings if  is selected  
SNMPv3Settings
Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is
enabled.
Off
On
        Select  or 
 
AcquirePrinterMngt.Info.fromHost
Enable or disable the monitoring of printer management information from a networked computer running
SNMP-compatible software.
Off
On
      
 Select  or   
Setting Menu List
481 
						

							Dedicated Port Settings
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan Utility and when browsing or specifying the machine settings over the network.
Off
On
      Select  or   
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment. 
Settinga
WaitTimeforConnectingtoaNetwork(P.376)
0 to 300 (sec.)
Ethernet Driver Settings
Select the communication mode of Ethernet (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). You can also view the MAC address of the machine.
AutoDetect
Select whether to automatically detect or manually select the communication mode and the Ethernet type. 
Con4gurLng EthernetSettings(P.373)
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type 10BASE-T
100BASE-TX
 
On
MACAddress
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
theMACAddressforWiredLAN(P.345)
IEEE 802.1X Settings
Enable or disable IEEE 802.1X authentication. 
Con4gurLng IEEE802.1XAuthentication(P.429)
Off
OnSetting Menu List
482