Canon printer imageCLASS MF236n User Manual

							        Select the type of image  Select the
halftone reproduction method 
 
Typeofimage
Select the object for which to change the setting.  represents letters and characters,  represents lines and  4gures, and  represents photos and images.

Produces a sharp print with strong contrast of lightness and darkness. It is suitable for printing image data such as photo image data.

Produces a print with smooth gradation or smooth edges. It is suitable for printing  4gures or graphs
containing gradation areas.

Produces a  4ne print with clear edges of text. It is suitable for printing characters and  4ne lines.
Setting Menu List
523 
						

							Adjustment/Maintenance
1469-095
 All the settings about adjustment and maintenance are listed with short
descriptions. Default settings are marked with a dagger (
).
Displ.TimingforCartridgePrep.Notif.(P.524)
TonerSave(P.524)
SpecialProcessing(P.525)
CleanFixingAssembly(P.529)
Displ. Timing for Cartridge Prep. Notif.
Set the display timing for the message notifying you that the amount remaining in the toner cartridges is low.
Auto  
Custom
10 to 20
 to 99 (%)
       
Enter the toner cartridge level    
Toner Save
Select whether to reduce toner consumption when copying or faxing.
CopyOff
On
 
Fax Off
On
      Select  or     
Setting Menu List
524             
						

							Whensetto
Fine lines and portions with lighter print density may become blurred.
Special Processing
If the print results on special types of paper are not satisfactory, the following settings may improve the quality of the
printouts.
SpecialPrintingModeU
If toner appears splattered around text and patterns in a printout, select .
Off
On
      
   
Whensetto
Print quality can be affected by the type of paper (especially lightweight paper) and the printing environment
(especially high humidity).
SpecialPrintingModeV
Adjust this setting if the print paper curls or wrinkles.
Off
Mode 1
Mode 2
Mode 3
      
 Select the mode  
Setting Menu List
525 
						

							Toenablethesetting
This setting is enabled in the following conditions.
	The paper size is set to , , , or 
	  is set to , , , , or 
Afterthesettingisenabled
Print speed is slower.
SpecialPrintingModeX
Adjust this setting if streaks adhere to the print paper.
Off
Mode 1
Mode 2
Mode 3
Mode 4
       
Select the mode  
SpecialPrintingModeZ
Adjust this setting if streaks adhere to the print paper output when copying or faxing.
Copy Off
Mode 1
Mode 2
Mode 3
Mode 4
 
Fax Off
Mode 1
Mode 2
Mode 3
Mode 4
       
Select  or   Select the mode  
Setting Menu List
526 
						

							AfterthesettingischangedBy specifying  or , streaks may adhere to the print paper. By specifying  or ,
outlines may be blurred or images may appear somewhat grainy. The print density becomes lighter as the setting progresses from  to .
Afterprintingfromasmartphoneortablet If streaks adhere to the paper, change the setting with  
 .
SpecialPrintingModeB
Adjust this setting if streaks adhere to the print paper after replacing the toner cartridge or after not printing for a long period of time.
Off
Mode 1
Mode 2
Mode 3
      
 Select the mode  
Afterthesettingisenabled
Print speed is slower.
SpecialPrintingModeC
Adjust this setting if streaks adhere to the print paper when printing out received faxes.
Off
OnSetting Menu List
527 
						

							      
   
Afterthesettingisenabled	 While more effect is gained than with , print speed is slower.
SpecialPrintingModeD
Adjust this setting if streaks adhere to the print paper. Also, setting this item to  will reduce the operating noise during printing.
Copy
Off
On
 
Print Off
On
      
 Select  or     
Afterthesettingisenabled
	 While more effect is gained than with , print speed is slower.
Afterprintingfromasmartphoneortablet
If streaks adhere to the paper, change the setting with  
 .
SpecialPrintingModeI
Only select  if paper jams frequently when performing 2-sided printing on lightweight paper or on curled
paper.
Off
On
      
   
Setting Menu List
528 
						

							Whensetto
White patches may appear in images printed on paper other than lightweight paper.
SpecialPrintingModeJ
If printing is uneven when printing  4ne lines or faint images, select .
Off
On
        
 
Whensetto.
The following may occur.
	 De4nition  may be affected
	 Toner appears in non-print areas when using a new toner cartridge
	 Toner cartridge may be used up more quickly
SpecialPrintingModeK
If toner does not adhere adequately and printouts are faded, select .
Off
On
      
   
Whensetto
Print speed is slower.
Clean Fixing Assembly
Clean the  4xing unit after a toner cartridge is replaced or if black streaks appear on printouts. 
Fixing
Assembly(P.596)
Setting Menu List
529    
						

							SystemManagementSettings
1469-096
 All the settings about System Management Settings are listed with short
descriptions. Default settings are marked with a dagger (
).
IfascreenforenteringaPINisdisplayed
	 Enter the PIN with the numeric keys and tap . 
SettingtheSystemManagerPIN(P.397)
Asterisks( *
)
	 Settings marked with " *1
" have different defaults depending on your country or region.
	 Settings marked with " *2
" are only available for the MF249dw / MF247dw.
NetworkSettings(P.530)
SystemManagerInformationSettings(P.530)
DeviceInformationSettings(P.531)
SecuritySettings(P.531)
SelectCountry/Region(P.532)
RemoteUISettings(P.532)
AutoOnlineforRemoteScan(P.533)
RestrictTXFunction(P.533)
DisplayJobLog(P.534)
UseasUSBDevice(P.534)
EnableProductExtendedSurveyProgram(P.534)
Displ.Consmbls.Info(RUI/TonerStatus)(P.535)
GoogleCloudPrintSettings(P.535)
Import/ExportAddressBook(P.535)
PDLSelection(PlugandPlay)(P.536)
UpdateFirmware(P.537)
InitializeAddressBook(P.537)
InitializeEcoReportCounter(P.537)
InitializeMenu(P.537)
InitializeAllData/Settings(P.538)
Network Settings 
See 
NetworkSettings(P.473) .
System Manager Information Settings
Specify the PIN exclusively for Administrators who have access privileges to  and . You can set the PIN from . You can also register the name of an
Administrator. 
SettingtheSystemManagerPIN(P.397)
Setting Menu List
530                                                                      
						

							SystemManagerPIN
Enter a number of up to seven digits for the System Manager PIN.
SystemManagerName
Enter up to 32 alphanumeric characters for the name of an Administrator.
Device Information Settings
Enter up to 32 alphanumeric characters for the name and the installation location to identify the machine.
Device Name
Location
      Select  or  
 Enter  or  ( EnteringText(P.38) )  
 
Security Settings 
Enable or disable settings for IP address or MAC address packet  4ltering.
UseTLS
Select whether to use TLS encrypted communication. EnablingTLSEncryptedCommunicationforthe
RemoteUI(P.426)
Off
On
IPv4AddressFilter
Enable or disable settings for  4ltering packets received from devices with  speci4ed IPv4 addresses. 
SpecifyingIPAddressesforFirewallRules(P.402)
Off
On
      
   Select  or   
Setting Menu List
531          
						

							IPv6AddressFilter
Enable or disable settings for 4ltering packets received from devices with  speci4ed IPv6 addresses. 
SpecifyingIPAddressesforFirewallRules(P.402)
Off
On
      
   Select  or   
MACAddressFilter
Enable or disable settings for  4ltering packets received from devices with  speci4ed MAC addresses. 
SpecifyingMACAddressesforFirewallRules(P.406)
Off
On
      
   Select  or   
Select Country/Region  *1
Specify the country or region where the machine is used. The default setting may vary depending on the setting selected at initial power-on.
United States (US)
Canada (CA)
Brazil (BR)
Mexico (MX)
Other
      Select a country or
region 
 
Remote UI Settings 
Con4gure  settings for using the Remote UI. Using the Remote UI allows you to  con4gure machine settings from a Web
browser.
Setting Menu List
532