Canon printer PIXMA MG5622 User Manual

							PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
To change print settings from the PictBridge (Wireless LAN) compliant device:
Settings on a PictBridge (Wireless LAN) Compliant Device
1.
Page size
Select the paper size when printing directly from a PictBridge (Wireless LAN) compliant device.When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper size to Default  on
the PictBridge (Wireless LAN) compliant device.
2.
Type  (Media type)
Select the media type when printing directly from a PictBridge (Wireless LAN) compliant device.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper type to Default  on
the PictBridge (Wireless LAN) compliant device.
3.
Print qlty  (Print quality)
Select the print quality when printing directly from a PictBridge (Wireless LAN) compliant device.
4.
Border  (Bordered/Borderless print)
Select the bordered/borderless layout.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Layout to Default  on the
PictBridge (Wireless LAN) compliant device.
5.
Photo fix
When  Auto photo fix  is selected, the scene or person's face of a shot photo is recognized and the most
suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene
with the most suitable color, brightness, or contrasts automatically to print.
Note
•
As a default, photos on a PictBridge (Wireless LAN) compliant device are printed with auto correction applied.
231 
						

							•If No correction  is selected, photos are printed without correction.6.
Red-EyeCorrection
Select  ON to correct red eyes in portraits caused by flash photography.
Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may be corrected.
232 
						

							Language selectionChanges the language for messages and menus on the LCD.233 
						

							Firmware updateYou can update the firmware of the machine, check the firmware version, or perform settings of a
notification screen, a DNS server and a proxy server.
Note
•
Only  Check current version  is available when Disable LAN is selected for  Change LAN in LAN
settings .
•
Install update
Performs the firmware update of the machine. If you select  Yes, the firmware update starts. Follow the
on-screen instructions to perform update.
Important
•
When you use this function, make sure that the machine is connected to the Internet.
Note
•
If the firmware update is not complete, check the following and take an appropriate action.
•
Check the network settings such as an access point or a router.
•
If  Cannot connect to the server.  is displayed on the LCD, press the  OK button, then try again
after a while.
•
Check current version
You can check the current firmware version.
•
Update notification setting When  ON is selected and the firmware update is available, the screen to inform you of the firmware
update is displayed on the LCD.
•
DNS server setup
Performs settings for a DNS server. Select  Auto setup or Manual setup . If you select Manual setup ,
follow the display on the LCD to perform settings.
•
Proxy server setup
Performs settings for a proxy server. Follow the display on the LCD to perform settings.
234 
						

							Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.
For details:
Paper Setting for Printing
•
Register cassette paper info
Registers the paper size and the media type you load in the cassette.
Note
•
When you register the paper size and the media type, the screen to select whether you apply the settings to those for copying is displayed. Select  Yes to apply the registered settings to copying.
•
For details on the proper combination of paper settings you can specify by the printer driver or on
the LCD:
Setting the Media Type with the Printer Driver and on the Printer
Setting the Paper Size with the Printer Driver and on the Printer
•
Detect paper setting mismatch
If you select  Yes, the machine detects whether the paper size and the media type are the same as
those registered in  Register cassette paper info . If printing starts with the settings that do not match,
an error message is displayed on the LCD.
Note
•
When  No is selected,  Register cassette paper info  or Detect cassette reinsertion  is disabled.
•
Detect cassette reinsertion
If you select  Yes, the machine detects the cassette is reinserted. When the  Register cassette paper
info  screen is displayed, register the paper size and the media type.
235 
						

							Reset settingYou can change the settings back to the default.•
Web service setup only
Reverts the Web service settings back to the default.
•
LAN settings only
Reverts the LAN settings other than the administrator password specified by IJ Network Tool back to the default.
•
Settings only
Reverts the settings such as the paper size or media type back to the default.
•
Device info sending setting only
Reverts only the device information sending settings.
•
Reset all
Reverts all settings you made to the machine back to the default. The administrator password specified by IJ Network Tool reverts to the default setting.
Note
•
You cannot change the following setting items back to the default:
•
The language displayed on the LCD
•
The current position of the print head
236 
						

							About ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn the machine
on/off automatically to save electricity.
Using Duplex Printing
Using Power Saving Function
Using Duplex Printing
Follow the procedure below to use duplex printing.
1.
Make sure that the machine is turned on.
2.
Select   ECO settings  on the HOME screen.
LCD and Operation Panel
3.
Select  Two-sided printing setting , then press the OK button.
4.
Use the  button to change the setting item, use the  button to change the setting,
then use the  OK button to confirm the selection.
1.
Copy
Sets two-sided copying as a default.
2.
Template print
Sets two-sided printing of template forms on the machine as a default.
Note
•
When duplex printing is selected, the  icon is displayed on each menu of the  HOME
screen or on the setting items for duplex printing on each print setting screen.
Using Power Saving Function Follow the procedure below to use power saving function.
237 
						

							1.Make sure that the machine is turned on.2.
Select  ECO settings  on the HOME screen.
LCD and Operation Panel
3.
Select  Energy saving settings , then press the OK button.
4.
Use the  button to change the setting item, use the  button to change the setting,
then use the  OK button to confirm the selection.
1.
Auto power off
Specifies the length of time to turn the machine off automatically when no operation is made or no printing data is sent to the machine.
Note
•
The Auto power off setting is invalid when using the machine via a network and the networkconnection is enabled.
You can check the connection status from  WLAN setting list in Confirm LAN settings
under  LAN settings .
2.
Auto power on
Selecting  ON enables the machine to turn on automatically when a scanning command from a
computer or printing data is sent to the machine.
238 
						

							About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at
night.
Follow the procedure below to perform setting.1.
Make sure that the machine is turned on.
2.
Select   Quiet setting  on the HOME screen.
LCD and Operation Panel
3.
Use the  button to select  Use quiet mode , then press the OK button.
The confirmation screen is displayed, then the 
 icon appears as the  Quiet setting menu icon.
Activate this setting to reduce the operating noise while printing is in progress.
Important
•
Operating speed may be reduced compared to when  Do not use quiet mode is selected.
•
This function may not be so effective depending on the machine's setting. Furthermore, certain
noise, such as when the machine is preparing for printing, is not reduced.
Note
•
You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver). No matter how you set the quiet mode, the mode is applied when you
perform operations from the operation panel of the machine or printing and scanning from the
computer.
239 
						

							Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or
access point, or by using the machine as an access point temporarily in an environment that has wireless
LAN router or access point, you can connect the machine to an external device such as a computer or a
smartphone and print/scan from them.
This section describes how to enable the access point mode, the access point name of the machine, and the security setting.
How to enable the Access Point Mode
Printing/Scanning with the Access Point Mode
How to terminate the Access Point Mode
Setting of the Access Point Mode
Important
•
Before using the machine with the access point mode, confirm the usage restrictions then switch the
machine to the access point mode.
Restrictions
•
If you use the machine with the access point mode for the long time, it is recommended that you
change the default access point name and the default password to the combination of numbers and
letters with the point of view of security.
How to enable the Access Point Mode Enable the access point mode following the procedure below.
1.
Make sure that the machine is turned on.
2.
Select   Setup  on the  HOME screen.
LCD and Operation Panel
3.
Select  Device settings , then press the OK button.
4.
Use the  button to select  LAN settings, then press the  OK button.
5.
Use the  button to select  Change LAN, then press the  OK button.
6.
Use the  button to select  Access point mode active , then press the OK button.
The access point name (SSID) that set currently is displayed. (When using the machine for the first
time, the default setting is displayed.)
When detecting the machine from the external device such as a computer or a smartphone, you can detect with the access point name (SSID).
240