Home > Canon > Printer > Canon printer PIXMA MG5622 User Manual

Canon printer PIXMA MG5622 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG5622 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 908
    							1.Connection Performance between the Printer and the Access Point:
    A mark indicates the result of the connection performance measurement between the printer and the access point.
    : Good connection performance
    : Unstable connection performance
    : Cannot connect
    : Measurement is canceled, or cannot measure
    2.
    Remeasurement
    Measures the connection performance again.
    Note
    •
    If any messages appear on  Overall Network Performance: , move the machine and access point as
    instructed to improve the performance.
    301 
    						
    							Maintenance ScreenDisplays to perform  Setting Initialization  and Network Setup of the Card Slot .
    To display the  Maintenance screen, select  Maintenance...  from the Settings menu.1.
    Setting Initialization
    Reverts all the network settings of the printer to factory default. Click  Initialize to display the  Initialize
    Settings  screen and click  Yes to initialize the network settings of the printer. Do not turn off the printer
    during initialization. Click  OK when initialization is complete.
    Performing initialization when connected over wireless LAN will break the connection, so perform setup with the Setup CD-ROM or perform setup according to the instructions on our website.
    2.
    Network Setup of the Card Slot
    Note
    •
    This item is not available depending on the printer you are using.
    Status  displays whether the card slot is mapped as a network drive.
    When you click, the  Network Setup of the Card Slot  is displayed.
    Network Setup of the Card Slot Screen
    302 
    						
    							Network Setup of the Card Slot Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Displays settings of the card slot and allows you to map a card slot on the network as a network drive on the
    computer.
    Displays when you click  Setup on the  Maintenance  screen.
    Network Setup of the Card Slot Screen (Setup Screen)
    Network Setup of the Card Slot Screen (Setup Failed Screen)
    Note
    •
    You can change the network settings of the printer using IJ Network Tool with USB connection after
    initializing the LAN settings. To change the network settings using IJ Network Tool, activate the LAN
    settings in advance.
    Network Setup of the Card Slot Screen (Setup Screen)
    1.
    Drive:
    Select the drive letter to assign to the network drive.
    2.
    Update Reloads the drive letters that are unassigned in  Computer (My Computer  in Windows XP) and
    displays them in the  Drive: list.
    Network Setup of the Card Slot Screen (Setup Failed Screen)
    Display when the network setup of the card slot is failed.
    303 
    						
    							1.
    Skip
    Completes the setup without mapping a network drive to the card slot.
    2.
    Retry
    Returns to  Network Setup of the Card Slot  screen and re-executes the network drive mapping.
    3.
    Cancel
    Cancels the card slot setup. When IJ Network Tool is running over LAN, the  Cancel button is
    displayed grayed out and cannot be clicked.
    304 
    						
    							Associate Port ScreenAllows you to associate a created port with a printer driver.
    Select the printer for which you want to change the association, then click  OK.
    Note
    •
    You cannot print with the printer unless the printer driver is associated with the port.
    1.
    Model:
    Displays the name of device specified as a destination port.It is blank if the name of device is not detected.
    2.
    Printer:
    Displays the printer driver installed in the computer. Select the printer for which you want to change the association.
    3.
    OK
    Performs association.
    305 
    						
    							Network Information ScreenDisplay the network information that is set for the printers and the computers.
    To display the  Network Information  screen, select Network Information  from the View menu.1.
    OK
    Returns to the  Canon IJ Network Tool  screen.
    2.
    Copy All Information
    All network information displayed is copied to the clipboard.
    306 
    						
    							Appendix for Network Communication
    Using the Card Slot over a Network
    When the Printer Driver Is Not Associated with a Port
    About Technical Terms
    Restrictions
    About Firewall
    307 
    						
    							Using the Card Slot over a Network
    Note
    •
    This screen is not available depending on the printer you are using.
    Mounting the Card Slot as the Network Drive
    Restrictions on Card Slot Use over a NetworkMounting the Card Slot as the Network DriveThe card slot must be mounted to use it over a network.To mount the card slot as the network drive, follow the procedure below.
    1.
    Insert a memory card into the card slot of the machine.
    2.
    Start up IJ Network Tool.
    3.
    Select the machine in  Printers:.
    4.
    Select Maintenance...  on the Settings  menu.
    5.
    Click Setup .
    6.
    Specify the drive letter, then click  OK.
    308 
    						
    							7.Make sure that the card slot is mounted.
    When the card slot is mounted, the following icon appears on  Computer (or My Computer ).
    Restrictions on Card Slot Use over a Network
    •
    The card slot can be shared by multiple computers, if the machine is connected to a network. Multiple
    computers can read files from a memory card in the card slot at the same time. However, while one
    computer is writing a file into a memory card, other computers cannot access the same file.
    •
    If your computer joins a domain, the card slot may not be mounted as the network drive.
    •
    If you use the memory card stored the large size files or many files, a large amount of card access may be generated. In this case, the operation in the memory card may be impossible or slow. Operate
    after the  Access lamp of the machine is lit.
    •
    When you access the network drive for the card slot over the network, file names consisting of eight
    or less lowercase letters (not including its extension) may be shown in uppercase.
    For example, a file name such as "abcdefg.doc" will be "ABCDEFG.DOC", while a name such as
    "AbcdeFG.doc" will appear the same.
    The file is not actually renamed, but merely appears to be changed.
    •
    When you enable a memory card in the card slot of the machine to be writable only from a USB-
    connected computer, you cannot access the network drive of the card slot. On the other hand, when you enable it to be writable only from a LAN-connected computer, the card slot is not detected via
    USB. Make sure that the card slot setting is selected properly according to your connection method.
    To read files from a memory card via USB and over a network, disable the function to write files to a
    memory card from a computer. You cannot write files to a memory card in either way with this setting.
    •
    When you enable a memory card in the card slot of the machine to be writable only from a LAN- connected computer, you can write files to a memory card from a computer connected to a network.
    Note that it may increase the risk that the data on the memory card is infected by computer viruses or accessed illegally.
    It is recommended to use the access control function of the machine or connect to the Internet via a router. For information on using a router, contact your Internet service provider or a network device
    manufacturer.
    •
    If you write files to a memory card over a network when IJ Network Scanner Selector EX is not running, the Date Modified of the files may not be proper. Make sure to start up IJ Network Scanner Selector EX before you write files to a memory card over the network. For details, refer to "IJ Network
    Scanner Selector EX Menu and Setting Screen" from the HOME of your product's  Online Manual.
    309 
    						
    							When the Printer Driver Is Not Associated with a PortIf  No Driver  is displayed for the printer's name on the  Canon IJ Network Tool screen, the printer driver is
    not associated with a created port.
    To associate a port with a printer driver, follow the procedure below.1.
    Start up IJ Network Tool.
    2.
    Select the printer displayed as  No Driver on Name .
    3.
    Select  Associate Port...  on the Settings  menu.
    The  Associate Port  screen is displayed.
    4.
    Select a printer to associate with a port.
    The list of the printers that the printer driver is installed is displayed at  Printer: on the Associate Port
    screen. Select a printer to associate with a created port.
    5.
    Click  OK.
    310 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG5622 User Manual