Canon printer PIXMA MG5622 User Manual

							1688Cause
The ink has run out. (The lamp on the ink tank flashes.)
ActionReplace the ink tank and close the operation panel.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the
remaining ink level. Press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation
of printing under the ink out condition.
Note
•
If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the LCD when checking the current ink level.
851 
						

							1689Cause
Printer detected ink out condition (The lamp on the ink tank flashes).
Action Replace the ink tank and close the operation panel.
An ink tank that was once empty is installed.
Printing under the ink out condition may damage the machine.
If you want to continue printing, you need to release the function for detecting the remaining ink level. To release this function, press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition or refilled ink tanks.
Note
•
If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on theLCD when checking the current ink level.
852 
						

							1700Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.853 
						

							1701Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.854 
						

							1712Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.855 
						

							1713Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.856 
						

							1714Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.857 
						

							1715Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.858 
						

							1871Cause
The cassette is not inserted.
Action Close the paper output tray, push the cassette so that the 
 mark on the cassette aligns with the  mark
on the machine.
Open the paper output tray, then press the machine's  OK button.
Note
•
The cassette paper information registration screen is displayed after inserting the cassette. Register
the cassette paper information according to the paper you loaded in the cassette.
•
If you want to cancel printing, press the machine's  Stop button.
859 
						

							1890Cause
The protective material for the print head holder or the tape may remain attached to the holder.
Action Open the operation panel, then confirm that the protective material or the tape does not remain attachedto the print head holder.
If you find the protective material or the tape remains attached, remove it, then close the operation panel.
If the problem is not resolved, contact the service center.
860