Canon printer PIXMA MG5622 User Manual

							Position or Size of the Image Cannot be Detected Correctly When
Scanning from the Operation Panel
Check 1  Make sure that the items are placed correctly.
Placing Items (When Scanning from a Computer)
Check 2 Check that the settings match the item to be scanned.
If you cannot scan properly by automatically detecting the item type, specify the item type and size.
When Scanning from the Operation Panel:Refer to "Setting Items for Scanning Using the Operation Panel of the Machine" for your model from Home of theOnline Manual  for details on the setting items when scanning from the operation panel.
When Scanning with IJ Scan Utility:
Scanning Documents
Scanning Photos
Scanning with Favorite Settings
791 
						

							Item Is Placed Correctly, but the Scanned Image Is Slanted
Check When  Document  or Magazine  is selected for  Select Source, deselect the
Correct slanted text document  checkbox and scan the item again.
Settings (Document Scan) Dialog Box
Settings (Custom Scan) Dialog Box
792 
						

							Scanned Image Is Enlarged (Reduced) on the Computer Monitor
Check 1 Change the display setting in the application.
Refer to the application's manual for details. If you have any questions, contact the manufacturer of the application.
Note
•
You cannot reduce the image size in Paint. To reduce the display size, open the images in an application.
Check 2  Change the resolution setting in ScanGear (scanner driver) and scan again.
The higher the resolution, the larger the resulting image will be.
Resolution
793 
						

							Software Problems
The E-mail Client You Want to Use Does Not Appear in the Screen for Selecting
an E-mail Client
794 
						

							The E-mail Client You Want to Use Does Not Appear in the Screen
for Selecting an E-mail Client
Check  Check that the e-mail client's MAPI is enabled.
Refer to the e-mail client's manual for how to set MAPI.
If the problem is not solved even when MAPI is enabled, select  None (Attach Manually) in the screen for
selecting an e-mail client, then manually attach the image to the outgoing e-mail.
795 
						

							Problems with the Machine
The Machine Cannot Be Powered On
The Machine Turns Off Unintentionally
Cannot Connect to Computer with a USB Cable Properly
Cannot Communicate with the Machine with USB Connection
LCD Cannot Be Seen At All
An Unintended Language Is Displayed on the LCD
Print Head Holder Does Not Move to the Position for Replacing
Printer Status Monitor Is Not Displayed
796 
						

							The Machine Cannot Be Powered On
Check1 Press the  ON button.
Check2
 Make sure that the power plug is securely plugged into the power cord
connector of the machine, then turn it back on.
Check3  Unplug the machine from the power supply, then plug the machine back in and
turn the machine back on after leaving it for at least 3 minutes.
If the problem is not resolved, contact the service center.
797 
						

							The Machine Turns Off Unintentionally
Check Deactivate the setting to turn the unit off automatically.
The machine turns off automatically according to the elapsed time you specified if you activate the setting to turn
the unit off automatically.
If you do not want the machine to turn off automatically, open the printer driver setup window and in  Auto Power
under the  Maintenance  sheet, select  Disable for Auto Power Off .
Note
•
You can activate the setting to turn the machine on/off automatically from the operation panel of the
machine or ScanGear (scanner driver).
•
From the operation panel of the machine:
About ECO settings
•
From ScanGear (scanner driver):
Scanner Tab
798 
						

							Cannot Connect to Computer with a USB Cable ProperlyPrinting or Scanning Speed Is Slow/Hi-Speed USB Connection Does Not
Work/"This device can perform faster" Message Is Displayed
If your system environment is not fully compatible with Hi-Speed USB, the machine will operate at a lower
speed provided under USB 1.1. In this case, the machine operates properly but printing or scanning
speed may slow down due to communication speed.
Check  Check the following to make sure that your system environment supports Hi-
Speed USB connection.
•
Does the USB port on your computer support Hi-Speed USB connection?
•
Does the USB cable or the USB hub support Hi-Speed USB connection?
Be sure to use a certified Hi-Speed USB cable. We recommend that the cable is no longer than around
10 feet / 3 meters.
•
Does the operating system of your computer support Hi-Speed USB connection?
Obtain and install the latest update for your computer.
•
Does the Hi-Speed USB driver operate properly?
Obtain the latest version of the Hi-Speed USB driver compatible with your hardware and reinstall it on
your computer.
Important
•
For details on Hi-Speed USB of your system environment, contact the manufacturer of your computer,
USB cable, or USB hub.
799 
						

							Cannot Communicate with the Machine with USB Connection
Check1 Make sure that the machine is turned on.
Check2
 Make sure that the USB cable is connected properly.
See 
Connecting the Machine to the Computer Using a USB Cable  to connect the USB cable properly.
Check3
 Do not start up IJ Network Tool while printing.
Check4 Do not print while IJ Network Tool is running.
Check5 Make sure that  Enable bidirectional support  is selected in the Ports sheet of
the properties dialog box of the printer driver.
How to Open the Printer Driver Setup Window
800