Home > Canon > Printer > Canon printer PIXMA MG5622 User Manual

Canon printer PIXMA MG5622 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG5622 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 908
    							3.
    Click Preview .
    Thumbnails of the preview images appear in the Preview area. Cropping frames are specified automatically according to the document size.
    4.
    Set  Destination .
    5.
    Set Output Size  according to purpose.
    6.
    Adjust the cropping frames and set  Image corrections as required.
    Note
    •
    You can correct each image separately. Select the frame you want to correct.
    •
    In thumbnail view, you can only create one cropping frame per image. To create multiple cropping
    frames in an image, scan in whole image view.
    Scanning Multiple Documents in Whole Image View
    611 
    						
    							7.Select the images you want to scan.
    Select the checkboxes of the images you want to scan.8.
    Click  Scan.
    Scanning Multiple Documents in Whole Image View
    Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan multiple documents as a single image.
    Note
    •
    Positions of slanted documents are not corrected in whole image view.
    1.
    After previewing images, click  (Thumbnail) on the Toolbar.
    Switch to whole image view.
    Note
    •
    When the whole image is displayed, the icon changes to  (Whole Image).
    2.
    Set  Destination .
    3.
    Set Output Size  according to purpose.
    Invert aspect ratio  will be enabled when  Output Size is set to anything but  Flexible. Click this button
    to rotate the cropping frame. Click again to return it to the original orientation.
    4.
    Adjust the cropping frames.
    612 
    						
    							Adjust the size and position of the cropping frames on the preview image. You can also create two or
    more cropping frames.
    If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area is specified, only the portion in the specified area will be scanned.
    Adjusting Cropping Frames (ScanGear)
    5.
    Set  Image corrections  as required.
    6.
    Click Scan.
    Areas framed by broken lines are scanned.
    Note
    •
    A response of ScanGear after scanning can be specified in  Status of ScanGear dialog after scanning
    on the 
    Scan tab  of the  Preferences  dialog box.
    613 
    						
    							Correcting Images and Adjusting Colors with ScanGear (Scanner
    Driver)
    Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading
    Correction, etc.)
    Adjusting Colors Using a Color Pattern
    Adjusting Saturation and Color Balance
    Adjusting Brightness and Contrast
    Adjusting Histogram
    Adjusting Tone Curve
    Setting Threshold
    614 
    						
    							Correcting Images (Unsharp Mask, Reduce Dust and Scratches,Fading Correction, etc.)
    The  Image Settings  functions on the  Advanced Mode  tab of ScanGear (scanner driver) allow you to
    enhance the outline of the subjects, reduce dust/scratches, and correct faded colors when scanning images.
    Setting Items
    Click 
     (Arrow) of a function and select an item from the pull-down menu.
    Important
    •
    Do not apply these functions to images without moire, dust/scratches, or faded colors. The color tone
    may be adversely affected.
    •
    Refer to "Image Settings " for details and precautions on each function.
    Note
    •
    Refer to "Scanning in Advanced Mode " to start the Advanced Mode  tab of ScanGear and scan.
    Adjusting the image brightness and color tone Set  Image Adjustment  to Auto , Photo , Magazine , or Document  according to the document type.
    NoneAuto
    615 
    						
    							Reducing show-through in text documents or lightening the base color inrecycled paper, newspapers, etc. when scanning documents
    Set  Reduce Show-through  to ON .
    OFFON
    Sharpening slightly out-of-focus images
    Set  Unsharp Mask  to ON .
    OFFON
    Reducing gradations and stripe patterns
    Set  Descreen  to ON .
    OFFON
    616 
    						
    							Note•
    Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenonwhere uneven gradation or a stripe pattern appears when such photos or pictures printed with fine
    dots are scanned.  Descreen is the function for reducing this moire effect.
    Reducing dust and scratches Set  Reduce Dust and Scratches  to Low , Medium , or High  according to the degree of dust and
    scratches.
    NoneMedium
    Correcting photos that have faded with time or due to colorcast
    Set  Fading Correction  to Low , Medium , or High  according to the degree of fading or colorcast.
    NoneMedium
    Reducing graininess
    Set  Grain Correction  to Low , Medium , or High  according to the degree of graininess.
    NoneMedium
    Correcting shadows that appear between pages when scanning open booklets
    Set  Gutter Shadow Correction  to Low , Medium , or High  according to the degree of shadows.
    NoneMedium
    617 
    						
    							Adjusting Colors Using a Color PatternYou can preview color changes and reproduce natural colors by using the color pattern function in
    ScanGear (scanner driver)'s  Basic Mode tab.
    Color Adjustment
    Correct colors that have faded with time or due to colorcast. "Colorcast" is a phenomenon where a
    specific color affects the entire picture due to the weather or ambient strong colors.
    Click an arrow in  Color Adjustment  to emphasize the corresponding color.
    Cyan & red, magenta & green, and yellow & blue are complementary color pairs (each pair produces a
    shade of gray when mixed). You can reproduce the natural colors of the scene by reducing the cast color and increasing the complementary color.
    It is recommended that you find a portion in the image where it should be white, and adjust the colors sothat the portion turns white.
    619 
    						
    							Preview image appears in the center. Preview image colors change as you adjust them.
    Below is an example of correcting a bluish image.
    Since  Blue and  Green  are too strong, click the  Yellow and Magenta  arrows to correct.
    BeforeAfter
    Note
    •
    Color adjustments are applied only to the cropping frames (scan areas) or the frame selected in
    thumbnail view.
    •
    You can select multiple frames or cropping frames by clicking them while pressing the Ctrl key.
    •
    You can also select a color tone from the color pattern displayed on the left of the  Color Pattern
    screen.
    •
    You can also use this function to add a specific tint to an image. Increase the magenta to add a warm tint, and increase the blue to add a cool tint.
    620 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG5622 User Manual