Oce PlotWave 300 User Manual

							Print a demo print
When to do
You can print a demo print to check if the Océ PlotWave 300 works correctly.
How to print a demo print
1.From the 'HOME' screen on the user panel select the 'System' tab.
2.Select the 'Setup' tab.
3.Use the scroll wheel to select 'Test prints' and confirm with the confirmation button
(above the scroll wheel).
4.Use the scroll wheel to select 'Demo print'.
5.Use the lower right soft key or press the green button to start printing.
6.Select 'Home' to return to the 'HOME' screen.
Chapter 7 - Solve problems
281
Print a demo print
Downloaded From ManualsPrinter.com Manuals 
						

							Print a test print
When to do
Print a test print from roll 1 or from roll 2 at the request of the Océ Helpdesk. The test
print can provide information to solve quality problems.
How to print a test print
1.From the 'HOME' screen on the user panel select the 'System' tab.
2.Select the 'Setup' tab.
3.Use the scroll wheel to select 'Test prints' and confirm with the confirmation button
(above the scroll wheel).
4.Use the scroll wheel to select 'Test print from roll 1' or 'Test print from roll 2'.
5.Use the lower right soft key or press the green button to start printing.
6.Select 'Home' to return to the 'HOME' screen.
Chapter 7 - Solve problems
282
Print a test print
Downloaded From ManualsPrinter.com Manuals 
						

							Adjust the print density
When to do
To influence the toner usage of your Océ PlotWave 300 you can print the print density
chart and adjust the print density offset. A negative value reduces the toner usage, a positive
value increases the toner usage.
How to adjust the print density
1.From the 'HOME' screen on the user panel select the 'System' tab.
2.Select the 'Setup' tab.
3.Use the scroll wheel to select 'Print density' and confirm with the confirmation button
(above the scroll wheel).
4.Press the green button to print the print density chart.
5.Refer to the print density chart, use the scroll wheel to select the preferred print density
offset and confirm with the confirmation button.
6.Press 'Next >'.
7.Select 'Home' to return to the 'HOME' screen.
Chapter 7 - Solve problems
283
Adjust the print density
Downloaded From ManualsPrinter.com Manuals 
						

							Chapter 7 - Solve problems
284
Adjust the print density
Downloaded From ManualsPrinter.com Manuals 
						

							Chapter 8
License management
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction to managing licenses
Introduction
The Océ applications and options are protected against unauthorized use. You need to
activate the license to enable an application or option for use. The 'Support' - 'Licenses'
tab in the Océ Express WebTools enables you to manage the licenses very easily.
This section describes the following.
■The basic concept of the licenses.
■How to manage the licenses.
Chapter 8 - License management
286
Introduction to managing licenses
Downloaded From ManualsPrinter.com Manuals 
						

							The 'Licenses' tab in the Océ Express WebTools
Introduction
The 'Support' - 'Licenses' tab has the following possibilities.
Possibilities
■View the current active licenses
■Get the host id of the Océ system
■Save the active licenses
■You can activate new licenses or saved licenses.
Chapter 8 - License management
287
The 'Licenses' tab in the Océ Express WebTools
Downloaded From ManualsPrinter.com Manuals 
						

							The basic workflow of 'Support' - 'Licenses' activation
Introduction
Before you can work with licenses, you must access to the Océ Express WebTools. The
following workflow describes per step when to use which possibility.
The workflow
1.View the current active licenses.
You can make a list of new options you need and make a list of license numbers. Océ
needs the list of new options and the license numbers to create a new license file.
2.Get the host id of the Océ system.
Océ needs the host id of your Océ system to create a new license file.
3.Send the list of new options you need, the list of license numbers and the host id to Océ.
Océ creates and delivers one or more new license files.
4.Create a back-up of the current active licenses if necessary.
Save the current active licenses to do so.
5.Activate the licenses.
The license activation job guides you through the following steps.
■1. Locate the license file
■2. Preview the new active licenses
■3. Accept the end user license agreement
■4. Finish the license activation job
■5. Restart the Océ system.
Chapter 8 - License management
288
The basic workflow of 'Support' - 'Licenses' activation
Downloaded From ManualsPrinter.com Manuals 
						

							Océ License Logic
Introduction
When you navigate to the 'Support' - 'Licenses' tab in the Océ Express WebTools, you
get access to the Océ License Logic application.
Overview Océ License Logic functionality
#
DescriptionFunction
You can make a list of new options you
need and make a list of license numbers.
Océ needs the list of new options and the
license numbers to create a new license
file.
View the current active licenses.
Océ needs the host id of your Océ system
to create a new license file.
Get the host id of the Océ system.
Save the current active licenses to do so.Create a back-up of the current active li-
censes if necessary.
Perform a license activation job to do so.
The license activation job guides you
through the following steps.
■1. Locate the license file
■2. Preview the new active licenses
■3. Accept the end user license agree-
ment
■4. Finish the license activation job
■5. Restart the Océ system.
Note:
Perform the license activation job
for each license file.
Activate the licenses.
Chapter 8 - License management
289
Océ License Logic
Downloaded From ManualsPrinter.com Manuals 
						

							The structure of license files and licenses
Introduction
A license file contains a license per option of your Océ system. You can view the current
active licenses with Océ 'Support' - 'Licenses' tab in the Océ Express WebTools. You can
preview the new active licenses during the license activation job.
A license file contains licenses of the same license-type
A license file you receive from Océ contains only licenses of the same license-type. The
following license types are possible.
■Demo
■Resale.
If you order demo and resale licenses, you receive 2 license files.
What you see per situation
What you see per situation depends on the license file you use.
What you see depends on the situation#
What do you seeSituation
You see the following.
■All current active demo licenses
■All current active resale licenses
■All current other not active options.
View the current active licenses.
You see one of the following options.
■A demo license file
■A resale license file
■A demo license file and a resale license file.
Océ delivered one or more li-
cense files.
You see the following.
■All current active demo licenses
■All new active demo licenses.
Note:
You cannot see the current active resale
licenses at this point.
Preview the demo licenses during
the license activation job if you
use the license file with demo li-
censes.
Chapter 8 - License management
290
The structure of license files and licenses
Downloaded From ManualsPrinter.com Manuals