Oce PlotWave 300 User Manual

							The output delivery
Introduction
The Océ PlotWave 300 is delivered with a top delivery tray to collect your printed output.
The top delivery tray can collect a maximum of 50 plain paper prints with a maximum
length of 48" [1200mm].
Illustration
How to define the output delivery
In the Océ Express WebTools you can define the default 'Sheet delivery' for your printed
output.
■If you select 'Top Delivery Tray' and you use plain or transparent paper, your printed
output is by default delivered in the standard top delivery tray.
Your printed output is delivered face-down.
If you use a different media type, the printed output is always delivered at the back
of the printer.
■If you select 'Back output' your printed output is by default delivered at the back of
the printer.
Your printed output is delivered face-up.
Chapter 2 - Get to know the printing system
31
The output delivery
Downloaded From ManualsPrinter.com Manuals 
						

							The components of the scanner (optional)
Attention:
The 'Océ Scanner Express' is only available in the ' Océ PlotWave 300 multifunction
Express'.
Illustration
Component - function table
#
Description / FunctionComponent
scanner top cover1
Use the original feeding table to feed the
original into the scanner (face up).
original feeding table2
Use the scanner open levers to open the
scanner top cover.
scanner open levers3
Exit for the scanned original.originals exit4
Prevents your output (long plots) from be-
ing refed into the scanner
Output refeed protector5
Chapter 2 - Get to know the printing system
32
The components of the scanner (optional)
Downloaded From ManualsPrinter.com Manuals5
1
4
3
2     
						

							The front original tray (optional)
Introduction
The Océ PlotWave 300 can be delivered with a front original tray to hold and collect
your originals.
When you want to scan multiple originals, the tray can hold your originals. The tray also
prevents that your originals fall onto the floor or damage when the scanner releases your
originals.
Illustration
[18] Position 1 - Holds and collects the originals
Chapter 2 - Get to know the printing system
33
The front original tray (optional)
Downloaded From ManualsPrinter.com Manuals 
						

							[19] Position 2 - Access the media drawer
Component - function table
#
Description / FunctionPosition
In this position the front original tray holds and receives originals.1
In this position you can to access the media drawer. You can lower the
front original tray easily by pushing the front original tray down.
2
Chapter 2 - Get to know the printing system
34
The front original tray (optional)
Downloaded From ManualsPrinter.com Manuals 
						

							The folder (optional)
Introduction
The Océ PlotWave 300 can be delivered with an external folder.
Finishing options
Finishing options#
Position of the componentFunctionComponent
[20] Folder
Folds the output.Folder
Chapter 2 - Get to know the printing system
35
The folder (optional)
Downloaded From ManualsPrinter.com Manuals  
						

							The printing system consumables
#
DescriptionConsumable partConsumable
The roll consists of a
core and the media. A
roll has a 3" core.
rollmedia
The core of the media
roll is the cardboard in-
ner part of the roll.
core
Bottle that contains the
black toner.
toner bottleOcé PlotWave 300
toner
Container for residual
toner.
residual toner container
Chapter 2 - Get to know the printing system
36
The printing system consumables
Downloaded From ManualsPrinter.com Manuals 
						

							Chapter 3
Quick start
Downloaded From ManualsPrinter.com Manuals 
						

							Connect the mains supply cable and the network cable
Attention:
Make sure the green power switch(B) is in 'off' position.
1.Plug in the mains supply cable at the power connection at the back of the printer (A) (on
the left).
2.Plug the other side of the mains supply cable into the wall socket.
3.Plug in the network cable at the bottom network connection at the back of the printer
(at the right) to connect the Océ PlotWave 300 to your company network.
Chapter 3 - Quick start
38
Connect the mains supply cable and the network cable
Downloaded From ManualsPrinter.com ManualsA
B       
						

							Switch on the printing system
Attention:
Make sure the mains supply cable (A) is plugged in.
1.Switch on the power switch at the rear side of the printing system (B).
2.Use the on / off button at the front side of the printer to switch on the printing system.
Chapter 3 - Quick start
39
Switch on the printing system
Downloaded From ManualsPrinter.com ManualsA
B       
						

							Note:
You can also use the 'Shut down' button in the Océ Express WebTools.
Chapter 3 - Quick start
40
Switch on the printing system
Downloaded From ManualsPrinter.com Manuals