Home > GTE > Communications System > GTE Omni Scbs Installation And Maintenance Manual

GTE Omni Scbs Installation And Maintenance Manual

    Download as PDF Print this page Share this page

    Have a look at the manual GTE Omni Scbs Installation And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 GTE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 656
    							PACKAGE C
    New/Enhanced Cards and
    Peripherals
    5.25 
    						
    							CPMC (Enhanced Central Processing Unit
    and Basic Memory Card)GEE 0w.n sxs
    0CPMC (PACKAGE C/SVR 2.0.X.X) INCLUDES:
    -16 BIT MICROPROCESSOR (INTEL 8086 COMPATIBLE)
    -TWO RS-232-C PORTS (FOR PMP AND SMDR EQUIPMENT)
    -ROM FOR OPERATING SYSTEM SOFTWARE AND DEFAULT STANDARD DATA BASE
    -RAM FOR CUSTOMIZED DATA BASE (REMAINDER OF RAM RESIDES IN MEM CARD)
    - REAL TIME CLOCK
    @ CPMC CARD:
    -SUPPORTS ALL PACKAGE C EQUIPMENT AND FEATURES
    -FUNCTIONS ONLY WITH MEMC CARD
    5.26 
    						
    							POWER
    SUPPLY00 010203040506070809
    10111213141516 171819202122
    RGEN
    KG01112I3I4I
    ICG51swcCPMMEMPFT
    I
    0MEMC (PACKAGE C/SIR 2.0.X.X) INCLUDES:
    -ROM FOR OPERATING SYSTEM SOFTWARE AND DEFAULT STANDARD DATA BASE
    -RAM FOR CUSTOMIZED DATA BASE (ALSO RESIDES IN CPMC CARD)
    @ MEMC CARD:
    -SUPPORTS ALL PACKAGE C EQUIPMENT AND FEATURES
    -FUNCTIONS ONLY WITH CPMC CARD
    -CONTAINS MORE MEMORY THAN CPMA OR CPMB CARDS
    5.27 
    						
    							SWE (Switch Controlan&m Car
    POWER
    SUPPLY
    * LOCATED IN EXPANSION CABINET
    @CONTAINS PCM TlME DlVlSlON SWITCHING CIRCUITRY AND SIGNAL MEMORY FOR INTERFACE
    BETWEEN EXPANSION CABINET AND THE CPMC CARD (LOCATED IN THE BASIC CABINET)
    0EIGHT HIGHWAYS OF 256 CHANNELS MULTIPLEXING FULL DUPLEX ARE DEDICATED TO THE
    EXPANSION CABINET
    @CONTAINS A FRONT EDGE CONNECTOR TO WHICH CABLE FROM BASIC CABINET IS CONNECTED
    5.29 
    						
    							4CHT (Character Trunk Card)
    04CHT CARD:
    -ACCOMMODATES FOUR DIGITAL SENDER/RECEIVER CIRCUITS PER CARD IN CONJUNCTION
    WITH A DATA INTERFACE UNIT (DIU)
    - PROVIDES HOTEL/MOTEL MESSAGE OUTPUT
    -SUPPORTS THE FOLLOWING COMMUNICATION CONFIGURATION:
    -7 BITS ASCII CODE TRANSMISSION
    - ASYNCHRONOUS TRANSMISSION
    - HALF/FULL DUPLEX OPERATION
    -DATA SPEED OF 110 BPS - 19.2 KBPS
    @MAXIMUM OF TWO CARDS PER CABINET IN CARD SLOTS 06-68
    5.30 
    						
    							ower Failure
    ansiamPOWER
    SUPPLY
    cl cl
    c 4BAT
    PW14 CN12L 4 -J LICG5-’ I/001/0 1 PFTJ
    LOCATED IN SLOT 22 OF EXPANSION CABINET
    PROVIDES SIX ADDITIONAL POWER FAILURE STATIONS FOR SIX PREDETERMINED TRUNKS
    TIED BY A CIRCUIT TO THE 
    6PFT (POWER FAILURE TRANSFER CARD) LOCATED IN BASIC CABINET
    ALARMS IN EXPANSION CABINET ARE TRANSMITTED TO AN EXTERNAL DEVICE BY THE 
    6PFE CARD
    MAY BE INSTALLED IN THE STANDARD SYSTEM (BASIC CABINET ONLY) THROUGH USE OF A
    TOGGLE SWITCH ON PRINTED CIRCUIT BOARD
    ACTIVATED FOR INSTALLATION IN EXPANSION CABINET BY THE NAO AND 
    NAI SIGNAL
    CONNECTED TO THE JAO AND JAI SIGNAL OF 
    6PFT CARD INA,SlC CABINET
    5.31 
    						
    							Attendant Console
    DISPLAY VIEW
    DISPLAY BUTTONSRINGERANGLE CONTROL
    ,
    .--7J-HANDSET/HEADSET
    DISPLAY -,VOLUME CONTROL
    VOLUMEI \ ’\HEADSET JACKS (2)
    I \/II\I/-PROGRAMMABLE
    ksISI@El -
    -ill--
    KEYPA&) 7
    FEATURE BUTTONS. ATTENDANT CONSOLE
    -PROVIDES PABX OPERATION OF SBCS-FUNCTIONS AS FRONT DESK CONSOLE WITH HOTEL/MOTEL PACKAGE-FUNCTIONS AS MASTER CONTROL TELEPHONE PROGRAMMING DEVICE FOR CUSTOMER DATA BASE
    ADMINISTRATION AND MAINTENANCE TASKS WHEN IN POSITION BUSY MODE
    - CONTAINS:
    - 28 NON-LOCKING LINE/FEATURE BUTTONS-4 LINE 20 CHARACTER ALPHANUMERIC-TWO PAIR WIRING (UP TO 300 FEET FROM CABINET)- MODULE PLUG- K STYLE HANDSET- HEADSET JACK
    *OVERFLOW AND/OR NIGHT ANSWER STATIONS CAN BE ESTABLISHED TO OPTIMIZE ATTENDANT CONSOLE CALL
    HANDLING
    5.32 
    						
    							Front Desk Console (FDC)
    CSD TELEPHONE EQUIPPED WITH BLF/DSS MODULE
    ATTENDANT CONSOLE EQUIPPED WITH BLF/DSS MODULE
    .ATTENDANT CONSOLE OR CSD TELEPHONE MAY SERVE AS FRONT DESK CONSOLE FOR HOTEL/MOTEL
    APPLICATIONS IF PROGRAMMED WITH FRONT DESK FEATURE BUTTON
    . FRONT DESK CONSOLE:-PROVIDES SINGLE-BUTTON ACCESS TO HOTEL/MOTEL FEATURES
    -MAY BE ASSOCIATED WITH A BLF/DSS FOR ROOM STATUS OR BLF/DSS INDICATION
    -FUNCTIONS AS PROGRAMMING DEVICE WHILE IN PROGRAMMING MODE
    -MAY BE EQUIPPED WITH A PRINTER TO PROVIDE PRINTOUTS OF WAKE-UP CALLS AND MESSAGE CHARGES
    .ANSWERING POSITION MAY FUNCTION AS FRONT DESK CONSOLE
    .MAXIMUM OF TWO FRONT DESK CONSOLES MAY BE ASSIGNED
    5.33 
    						
    							Data Interface Unit (DIU)
    CARRIER DETECTePROVIDES DIGITAL DATA AND CONTROL BETWEEN 8DTC CARDS AND TERMINALS, MODEMS, WORK STATIONS OR
    PRINTERS STATIONS(WITHOUT BEING ASSOCIATED WITH TELEPHONE)
    QMAY BE ASSOCIATED WITH CS-10 OR CS-20 TELEPHONES FOR SIMULTANEOUS VOICE/DATA TRANSMISSION
    eMAXIMUM OF 40 DIU INSTRUMENTS IN EXPANDED SYSTEMS
    .DIU SUPPORTS THE FOLLOWING COMMUNICATION:
    - RS-232-C INTERFACE
    - ASYNCHRONOUS/SYNCHRONOUS TRANSMISSION
    -DATA SPEEDS OF UP TO 19.2 KBPS.PROVIDES AN INTERFACE PORT TO RS-232-C PRINTER FOR HOTEL/MOTEL APPLICATION
    5.34 
    						
    							Hotel/Motel PrinterPRINTS STORED INFORMATION SUCH AS WAKE-UP EXECUTION AND MESSAGE REGISTRATION
    MAXIMUM OF TWO PRINTERS CAN BE INSTALLED
    CONNECTED TO DIU OR CSD (WITH DTA INTERFACE)
    REQUIRES 4CHT CARD FOR SYSTEM OPERATION OF PRINTER
    REQUIRES 8DTC CARD FOR 
    DIU/DTA CONNECTION
    SYSTEM PROVIDES PRINTOUT BUFFER CAPABLE OF STORING 100 MESSAGES FOR EACH
    HOTEL/MOTEL PRINTER
    MAXIMUM CABLE LENGTH OF 50 FEET FROM 
    DIU/DTA
    5.35 
    						
    All GTE manuals Comments (0)

    Related Manuals for GTE Omni Scbs Installation And Maintenance Manual