GTE Omni Scbs Installation And Maintenance Manual

							Student Notes5.36 
						

							f “,..
PACKAGE C
Data Communications Architecture
5.37 
						

							Data Switching Internal and
External Interfaces
I
PABX
co
WATS
FX
DID/DISA
CENTREX
I
DATA
INTERF
WITH DATADATATERMINAL ADAPTER
TERl!.fllNALMODEM
5.38 
						

							Package C Data Communications
Configuration
ASSOCIATED WITH DIU
DATADATADATADATADATADATA
TERMINALTERMINALTERMINALTERMINALTERMINALTERMINAL
.SUPPORTS SIX CSD TELEPHONES WITH DATA TERMINAL ADAPTERS AND TWO DATA INTERFACE
UNITS (OR TWO VOICE ONLY CSD TELEPHONES).
5.39 
						

							5.40 
						

							Review Exercise- Package C
Overview (5.1)
INSTRUCTIONS:THE FOLLOWING EXERCISE CONSISTS OF MULTIPLE CHOICE, TRUE/FALSE, FILL IN THE BLANK, OR
MATCHING TYPE QUESTIONS. ALL AVAILABLE RESOURCES (I.E., STUDENT WORKBOOK, NOTES, AND GTEP MANUAL) MAY
BE USED AS REFERENCES. SUBMIT EXERCISE TO INSTRUCTOR FOR GRADING WHEN LAST QUESTION HAS BEEN
COMPLETED.
1.
2.
3.
4.
5.
6.PACKAGE C EXPANDS THE SYSTEM TO INCLUDE THE FOLLOWING SYSTEM APPLICATIONS:
A.HOTEL/MOTEL, KEY SYSTEM FEATURES, AUTOMATIC CALL DISTRIBUTION, AND EXPANDED SYSTEM
ARCHITECTURE
B.VOICE MESSAGE, ATTENDANT CONSOLE, HOTEL/MOTEL, AND ENHANCED DATA COMMUNICATIONS
C.KEY SYSTEM FEATURES, ATTENDANT CONSOLE, EXPANDED SYSTEM ARCHITECTURE, AND DICTATION AND
CONTROL
D.ATTENDANT CONSOLE, KEY SYSTEM FEATURES, EXPANDED SYSTEM ARCHITECTURE, AND HOTEL/MOTEL
THE EXPANDED SYSTEM ARCHITECTURE INCREASES THE SYSTEM CAPACITY TO A MAXIMUM OF
TRUNKS AND
STATIONS.THE
FEATURE ALLOWS DIRECT ACCESS TO STATIONS, TRUNKS, AND FEATURES
FROM ANY REMOTE DTMF TELEPHONE.
THEFEATURE ALLOWS INCOMING CALLS ON DID TRUNKS TO BYPASS THE
ATTENDANT CONSOLE AND RING DIRECTLY TO A STATION.
THEATTENDANT CONSOLE FEATURE BUTTON ALLOWS THE ATTENDANT
CONSOLE TO BE UTILIZED AS THE FRONT DESK CONSOLE IN HOTEL/MOTEL APPLICATIONS.
THEKEY SYSTEM FEATURE ALLOWS A STATION USER TO AUTOMATICALLY
SELECT AN INTERCOM OR LINE BUTTON BEFORE OR AFTER GOING OFF-HOOK.
5.41 
						

							7.(TRUE OR FALSE)THE DATA INTERFACE UNIT (DIU) CAN SERVE AS A STANDALONE UNIT FOR
INTERFACE WITH A MODEM OR PRINTER.
8.MATCH EACH OF THE FOLLOWING HOTEL/MOTEL FEATURES WITH ITS CORRECT DEFINITION:
DO NOT DISTURB
AUTOMATIC WAKE-UP WITH
PRINTERROOM STATUS
MESSAGE REGISTRATION
VACANT ROOM 
RESTRBCTIONA.
B.
C.
D.
E.RESTRICTS INCOMING AND/OR OUTGOING CALLS WHILE ROOM IS IN
VACANT STATUSALLOWS FRONT DESK CONSOLE EQUIPPED WITH 
BLF/DSS MODULE
TO DISPLAY INDICATION FOR VACANT, OCCUPIED, NEEDS CLEAN-UP,
DO NOT DISTURB, AND WAKE-UP/NO ANSWER CONDITIONS
PROHlB%TS CALLS FROM OTHER GUEST ROOMS
PROVIDES WAKE-UP SERVICE WITH MUSIC OR SYSTEM TONES
PROVIDES RECORD OF GUEST CHARGES FOR USE OF LOCAL LINES,
WATS LINES, FX LINES, OR OCC/SCC FACILITIES BASED ON PREPRO-GRAMMED RATE TABLES IN SYSTEM
9.THE SYSTEM ALLOWS A MAXIMUM OF
CSD TELEPHONES EQUIPPED WITH DATA TERMINAL ADAPTERS OR
CSD, CS-10, OR CS-20 TELEPHONES. 
BNTERFACED WITH DATA INTERFACE UNITS.10. THE NEWCARD PROVIDES HOTEL/MOTEL MESSAGE OUTPUT AND
ACCD~~~DAT~S THE FOUR DIGBTAL SENDER/RECEIVER ClRCUlTS USED IN C~N~~~CT~DN WITH DATA INTERFACE
UNITS.
5.42 
						

							PACKAGE C
Installation
5.43 
						

							GIVEN:e
0
0
GTE OMNI SBCS (PREVIOUSLY INSTALLED)
GTE 
OMNI SBCS PACKAGE C EQUIPMENT AND PERIPtiERALS
-CPMC, MEMC, 4CHT, SWB, SWE, AND PFE CARDS:
- ATTENDANT CONSOLE
- HOTEL/MOTEL PRINTER
-DATA INTERFACE UNIT (DIU)
GTE 
OMNB SBCS COURSE AND SITE DOCUMENTATIO
STANDARD 
ilNSTALLATlON TOOLS
REVIEW EXERCISE
QUIREDFOREXPANDED SYSTE
INSTALLATION
COMPLETE REVIEW EXERCISE
9.44 
						

							Package C Card InstallationYBASIC CABINET
POWERSUPPLY
YEXPANSION CABINET
1.GROUND YOURSELF PRIOR TO HANDLING CARDS.
2.SINCE SYSTEM POWER MUST BE TURNED OFF WHEN INSTALLING OR REPLACING CPMC OR MEMC CARDS, OFFICE
DEPENDENT DATA BASE WILL BE DELETED AND CUSTOMIZED DATA BASE MUST BE REPROGRAMMED.
3.IF POWER FAIL TRANSFER IS REQUIRED IT WILL BE NECESSARY TO INSTALL A 6PFE CARD IN SLOT 22 OF THE
EXPANSION CABINET USING THE CORRECT TOGGLE OPTION. CROSS CONNECT THE APPROPRIATE CONTROL LEADS
BETWEEN THE BASIC AND EXPANSION CABINETS.
4.INSTALL CARDS AFFECTED BY PACKAGE C SLOTS:-CPMC 
- SLOT 20
MEMC
- SLOT 21GPFT/GPFE - BASIC CABINET SLOT 22
6PFE -4CHT 
-
IF EXPANDED SYSTEM IS INSTALLED, USE EXPANSION CABINET SLOT 22. SLOTS 20 AND 21 WILL BE BLANKSLOTS 06 THROUGH 14 (BASIC AND EXPANSION CABINET)
SWB - SLOT 19 (BASIC CABINET)SWE 
- IF EXPANDED SYSTEM IS INSTALLED, USE EXPANSION CABINET iLOT 19
5.INITIALIZE CARDS BY USING COLD RESTART TO RESET THE SYSTEM. PRESS RESTART BUTTON WITH TOGGLE IN
UPPER POSITION ON CPMC CARD.
6.REPROGRAM SYSTEM WITH ODDB.
5.45