Xerox 1632 2240 3535 Color Carrera Manual

							6/02
2-271 DC1632/2240
16-721, 16-726Status Indicator RAPs Prelaunch Training/Review
16-721  Other ErrorsAn error occurred during printing that is not defined.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Run the same job again to check the error status and ask Support G for help.
16-726  Decomposer Auto JudgementCannot switch decomposer; a print Language auto judgement error occurred.
 Auto Judgement ErrorProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Fix and select the Decomposer from the Operation Panel or with a command.  
						

							6/02
2-272DC1632/2240
16-728, 16-729
Prelaunch Training/Review Status Indicator RAPs
16-728  TIFF DataThe data contains a Tag that is not set in the Image File Expansion Library.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Delete the unsupported Tag from the data and retry printing, etc.
16-729  TIFF DataThe specified settings exceed the upper limit of the valid number of colors and pixels.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Correct the valid range, etc. 
						

							6/02
2-273 DC1632/2240
16-730, 16-731Status Indicator RAPs Prelaunch Training/Review
16-730  ART CommandART IV Command Invalid.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Delete the unsupported command from the data and retry printing.
16-731  TIFF DataInvalid TIFF Data.  The TIFF data is broken or cut halfway.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Resend the data, etc. 
						

							6/02
2-274DC1632/2240
16-735, 16-737
Prelaunch Training/Review Status Indicator RAPs
16-735  Job TemplateThe system tried to output the Job Template List while the Job Template was being updated.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Run the job again after the Job Template update has completed.
16-737  Server ReadRead error from the Job Template Pool ServerProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Check that Authorization to read is established for the storage destination server directory set
as resource. 
						

							6/02
2-275 DC1632/2240
16-739, 16-740Status Indicator RAPs Prelaunch Training/Review
16-739  Job Template PathThe specified path of the Job Template Pool Server cannot be found.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set the resource of the storage destination path from a client PC on the CentreWare.
16-740  Job Template LoginJob Template Server Login Error.  Cannot log in to the Job Template Pool Server.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set the log-in name and password in the Job Template file storage destination.
From some other PC connected to the network, check that you can log in with the above
account.
Set the log-in name and password as a resource from the CentreWare client PC. 
						

							6/02
2-276DC1632/2240
16-741, 16-742
Prelaunch Training/Review Status Indicator RAPs
16-741  Job Template ConnectionCannot connect to the Job Template Pool Server.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Connect the cable from the M/C to a network correctly.
From the destination server, check that you can identify the M/C with ping.
Perform the ping test on the destination server from .
From a client PC to check that the FTP connection to the destination server is possible.
16-742  HD FileFile system was full when the Job Template was stored into the local HD.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Because the scanned images may exceed HD capacity, rerun the job.
If the problem continues, Initialize the HD.
If the problem continues, replace the HD (PL 13.1). 
						

							6/02
2-277 DC1632/2240
16-743, 16-744Status Indicator RAPs Prelaunch Training/Review
16-743  Job Template InstallationJob template pool server installation error or job template pool server setting failureProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set the Spool Server related parameters again.
16-744  Job Template AddressThe Job Template Pool Server address cannot be solved (Response to the DNS library error)ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Check the connection to the DNS. Check that the Job Template Pool Server domain name is
the one that has been registered in the DNS. 
						

							6/02
2-278DC1632/2240
16-745, 16-748
Prelaunch Training/Review Status Indicator RAPs
16-745  Job Template DefinitionThe Job Template Pool Server address cannot be solved (The DNS address is not set)ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set the DNS address. Or set the Job Template Pool Server address by the IP address.
16-748  HD FullFull status was detected at HD access and a job was aborted.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Retry printing after making more space of the HD capacity. 
						

							6/02
2-279 DC1632/2240
16-749, 16-757Status Indicator RAPs Prelaunch Training/Review
16-749  XJCL SyntaxSyntax error of the JCL command was detected.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Correct the command.
16-757  Auditron UserInvalid Auditron UserProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set a correct account and retry. 
						

							6/02
2-280DC1632/2240
16-758, 16-759
Prelaunch Training/Review Status Indicator RAPs
16-758  Auditron FunctionAn auditron function is disabled.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Consult the account administrator to add a right.
Set the new function that is allowed for that account and retry.
16-759  Auditron LimitAuditron reached limit.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Consult the account administrator to set the number of copies, etc.