Toshiba Estudio 230 Manual
Have a look at the manual Toshiba Estudio 230 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 55 2 593 Image Gamma data slope adjust- mentText/Photo PPC 0 SYS One’s place: 0: Equivalent to the set value 5 1 to 9: Select the slope of Gamma curve (The larger the value is, the larger the slope becomes.) Ten’s place: 0: Equivalent to the set value 5 1 to 9: Select the slope of low density (The smaller the value is, the darker the background becomes.) 00: Use default value 1 594 Image Photo PPC 0 SYS 1 595 Image Text PPC 0 SYS 1 620 Image Sharpness adjustmentText/Photo PPC EUR: 1 UC: 1 JPN: 0 SYS When the value increases, the image becomes sharper. When the value decreases, the image becomes softer. The smaller the value is, the less the moire becomes. One’s place: Fixed value (05-620 is “1”, 05-621 is “2”, 05-622 is “5”) Ten’s place: Adjustable from 0 to 9 regarding the default value as the stan- dard (The larger the value is, the sharper the image becomes.) * When entering “0” on the tens place, this value is not displayed on the entry screen. 1 621 Photo PPC 2 SYS 1 622 Text PPC EUR: 45 UC: 45 JPN: 45 SYS 1 653 Image Adjustment of smudged/faint textText/Photo PPC EUR: 208 UC: 208 JPN: 216 SYS Adjusts the level of the smudged/faint text. With increasing the value, the faint text is suppressed, and with decreasing it, the smudged text is sup- pressed. 1 654 Image Adjustment of smudged/faint textPS PRT 5 M Adjustment of the smudged/faint text. With decreasing the value, the faint text is suppressed, and with increasing it, the smudged text is sup- pressed. 1 655 PCL PRT 5 M 1 Adjustment mode (05) Code Classi- fication Items Func- tion Default RAM Contents Proce- dure
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 56 667-0 Image Density adjustment of cop- ied image PPC 0 M Adjusts the density level of copied image. When the value decreases, the text becomes lighter. 4 667-1 PPC 4 M 4 667-2 PPC 5 M 4 667-3 PPC 6 M 4 667-4 PPC 10 M 4 672-0 Image Adjustment of printer image densityNormal PRT 0 M Adjustment of the image density. With decreasing the value, the text becomes lighter. 4 672-1 PRT 4 M 4 672-2 PRT 5 M 4 672-3 PRT 6 M 4 672-4 PRT 10 M 4 676-0 Toner sav- ingPRT 0 M 4 676-1 PRT 2 M 4 676-2 PRT 3 M 4 676-3 PRT 4 M 4 676-4 PRT 5 M 4 693 Image Range correc- tion on origi- nal set on the RADFText/Photo PPC EUR:12 UC:12 JPN:22 SYS Sets whether the values of the background peak and text peak are fixed or not. One’s place is an adjustment for “auto- matic density” and ten’s place is for “manual den- sity”. Once they are fixed, the range correc- tion is performed with standard values. The values of the back- ground peak and text peak affect the reproduc- tion of the background density and text density respectively. 1: fixed/fixed 2: varied/fixed 3: fixed/varied 4: varied/varied * Background peak/Text peak 1 694 Photo PPC 12 SYS 1 695 Text PPC 22 SYS 1 Adjustment mode (05) Code Classi- fication Items Func- tion Default RAM Contents Proce- dure
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 57 2 700 Image Adjustment of binarized threshold (Text)Center value FAX 120 SYS When the value increases, the image at the center step becomes lighter. 1 701 Light step valueFAX 20 SYS When the value increases, the image of “light” side becomes lighter. 1 702 Dark step valueFAX 20 SYS When the value increases, the image of “dark” side becomes darker. 1 710 Image Density adjustment Fine adjust- ment of “man- ual density”/ Center valuePhoto FAX 128 SYS When the value increases, the image at the center step becomes darker. 1 714 Text/Photo FAX 128 SYS 1 715 Image Density adjustment Fine adjust- ment of “man- ual density”/ Light step valuePhoto FAX 20 SYS When the value increases, the image of the “light” steps becomes lighter. 1 719 Text/Photo FAX 20 SYS 1 720 Image Density adjustment Fine adjust- ment of “man- ual density”/ Dark step valuePhoto FAX 20 SYS When the value increases, the image of the “dark” steps becomes darker. 1 724 Text/Photo FAX 20 SYS 1 725 Image Density adjustment Fine adjust- ment of “auto- matic density”Photo FAX 128 SYS When the value increases, the image becomes darker. 1 729 Text/Photo FAX 128 SYS 1 820 Image Range correc- tion/Text peak adjustmentText/Photo SCN 224 SYS When the value decreases, the text becomes darker. 1 821 Text SCN 224 SYS 1 822 Photo SCN 239 SYS 1 Adjustment mode (05) Code Classi- fication ItemsFunc- tion Default RAM Contents Proce- dure
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 58 825 Image Range correc- tion on origi- nal manually set on the original glassText/Photo SCN 12 SYS Sets whether the values of the background peak and text peak are fixed or not. One’s place is an adjustment for “auto- matic density” and ten’s place is for “manual den- sity”. Once they are fixed, the range correc- tion is performed with standard values. The values of the background peak and text peak affect the reproduction of the background density and text density respectively. 1: fixed/fixed 2: varied/fixed 3: fixed/varied 4: varied/varied * Background peak/ Text peak 1 826 Text SCN 12 SYS 1 827 Photo SCN 12 SYS 1 830 Image Range correc- tion on origi- nal set on the RADFText/Photo SCN 12 SYS Sets whether the value of the background peak and text peak are fixed or not. One’s place is an adjustment for “auto- matic density” and ten’s place is for “manual den- sity”. Once they are fixed, the range correc- tion is performed with standard values. The values of the back- ground peak and text peak affect the reproduc- tion of the background density and text density respectively. 1: fixed/fixed 2: varied/fixed 3: fixed/varied 4: varied/varied * Background peak/ Text peak 1 831 Text SCN 12 SYS 1 832 Photo SCN 12 SYS 1 835 Image Range correc- tion/Back- ground peak adjustmentText/Photo SCN 48 SYS When the value increases, the back- ground becomes more brightened. 1 836 Text SCN 48 SYS 1 837 Photo SCN 40 SYS 1 845 Image Density adjustment Fine adjust- ment of “man- ual density”/ Center valueText/Photo SCN 128 SYS When the value increases, the image at the center step becomes darker. 1 846 Text SCN 128 SYS 1 847 Photo SCN 128 SYS 1 Adjustment mode (05) Code Classi- fication ItemsFunc- tion Default RAM Contents Proce- dure 04/09
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 59 2 850 Image Density adjustment Fine adjust- ment of “man- ual density”/ Light step valueText/Photo SCN 20 SYS When the value increases, the image of the “light” steps becomes lighter. 1 851 Text SCN 20 SYS 1 852 Photo SCN 20 SYS 1 855 Image Density adjustment Fine adjust- ment of “man- ual density”/ Dark step valueText/Photo SCN 20 SYS When the value increases, the image of the “dark” steps becomes darker. 1 856 Text SCN 20 SYS 1 857 Photo SCN 20 SYS 1 860 Image Density adjustment Fine adjust- ment of “auto- matic density”Text/Photo SCN 128 SYS When the value increases, the image becomes darker. 1 861 Text SCN 128 SYS 1 862 Photo SCN 128 SYS 1 865-0 Image Sharpness adjustment (Text/Photo)Reproduc- tion ratio 40% or smallerSCN 1 SYS When the value increases, the image becomes sharper. When the value decreases, the image becomes softer. The smaller the value is, the less the moire becomes. Ones place: Fixed value (05-865 is “1”, 05-866 is “2”, 05-867 is “5”) Tens place: Sharpness intensity (0: Use default value, 1-9: Filter inten- sity) 4 865-1 Reproduc- tion ratio 41-80%SCN 1 SYS 4 865-2 Reproduc- tion ratio 81% or largerSCN 1 SYS 4 866-0 Image Sharpness adjustment (Text)Reproduc- tion ratio 40% or smallerSCN 2 SYS 4 866-1 Reproduc- tion ratio 41-80%SCN 2 SYS 4 866-2 Reproduc- tion ratio 81% or largerSCN 2 SYS 4 867-0 Image Sharpness adjustment (Photo)Reproduc- tion ratio 40% or smallerSCN 5 SYS 4 867-1 Reproduc- tion ratio 41-80%SCN 5 SYS 4 867-2 Reproduc- tion ratio 81% or largerSCN 5 SYS 4 Adjustment mode (05) Code Classi- fication Items Func- tion Default RAM Contents Proce- dure
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 60 913 Image Range correc- tion on origi- nal manually set on the original glassCustom Mode 1 PPC EUR:12 UC:12 JPN:22 SYS Set whether the values of the background peak and text peak are fixed or not. Ones place is an adjustment for “auto- matic density” and tens place is for “manual den- sity”. Once they are fixed, the range correc- tion is performed with standard values. The values of the background peak and text peak affect the reproduction of the background density and text density respectively. 1: fixed/fixed 2: varied/fixed 3: fixed/varied 4: varied/varied * Background peak/ Text peak 1 914 Custom Mode 2PPC 22 SYS 1 915 Custom Mode 3PPC 12 SYS 1 916 Image Range correc- tion on origi- nal set on the RADFCustom Mode 1 PPC EUR:12 UC:12 JPN:22 SYS Set whether the values of the background peak and text peak are fixed or not. Ones place is an adjustment for “auto- matic density” and tens place is for “manual den- sity”. Once they are fixed, the range correc- tion is performed with standard values. The values of the background peak and text peak affect the reproduction of the background density and text density respectively. 1: fixed/fixed 2: varied/fixed 3: fixed/varied 4: varied/varied * Background peak/Text peak 1 917 Custom Mode 2PPC 22 SYS 1 918 Custom Mode 3PPC 12 SYS 1 919 Image Range correc- tion Background peak adjust- mentCustom Mode 1 PPC 40 SYS When the value increases, the back- ground becomes more brightened. 1 920 Custom Mode 2PPC 64 SYS 1 921 Custom Mode 3PPC 16 SYS 1 Adjustment mode (05) Code Classi- fication ItemsFunc- tion Default RAM Contents Proce- dure
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 61 2 922 Image Sharpness adjustmentCustom Mode 1PPC 1 SYS When the value increases, the image becomes sharper. When the value decreases, the image becomes softer. The smaller the value is, the less the moire becomes. Ones place: Fixed value (05-922 is “1”, 05-923 is “5”, 05-924 is “2”) Ten’s place: Adjustable from 0 to 9 regarding the default value as the stan- dard (The larger the value is, the sharper the image becomes.) * When entering “0” on the tens place, this value is not displayed on the entry screen. 1 923 Custom Mode 2PPC EUR:45 UC:45 JPN:45 SYS 1 924 Custom Mode 3PPC 2 SYS 1 928 Image Adjustment of smudged/faint textCustom Mode 1 PPC 208 SYS Adjustment of the smudged/faint text. With increasing the value, the faint text is suppressed, and with decreasing it, the smudged text is sup- pressed. 1 931 Image Density adjustment Fine adjust- ment of “man- ual density”/ Center valueCustom Mode 1 PPC 128 SYS When the value increases, the image of the center step becomes darker. 1 932 Custom Mode 2PPC 128 SYS 1 933 Custom Mode 3PPC 128 SYS 1 934 Image Density adjustment Fine adjust- ment of “man- ual density”/ Light step valueCustom Mode 1 PPC 20 SYS When the value increases, the image of the “light” step density becomes lighter. 1 935 Custom Mode 2PPC 20 SYS 1 936 Custom Mode 3PPC 20 SYS 1 937 Image Density adjustment Fine adjust- ment of “man- ual density”/ Dark step valueCustom Mode 1 PPC 20 SYS When the value increases, the image of the “dark” step density becomes darker. 1 938 Custom Mode 2PPC 20 SYS 1 939 Custom Mode 3PPC 20 SYS 1 940 Image Density adjustment Fine adjust- ment of “auto- matic density”Custom Mode 1 PPC 128 SYS When the value increases, the image becomes darker. 1 941 Custom Mode 2PPC 128 SYS 1 942 Custom Mode 3PPC 128 SYS 1 Adjustment mode (05) Code Classi- fication ItemsFunc- tion Default RAM Contents Proce- dure 05/05
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 62 943 Image Gamma data slope adjust- mentCustom Mode 1 PPC 0 SYS One’s place: 0: Equivalent to the set value 5 1 to 9: Select the slope of Gamma curve (The larger the value is, the larger the slope becomes.) Ten’s place: 0: Equivalent to the set value 5 1 to 9: Select the slope of low density (The smaller the value is, the darker the background becomes.) 00: Use default value 1 944 Custom Mode 2PPC 0 SYS 1 945 Custom Mode 3PPC 0 SYS 1 976 Mainte- nance Equipment number (serial number) entry ALL - SYS When this adjustment is performed with this code, the setting code (08-995) is also performed auto- matically (10 digits). 1 Adjustment mode (05) Code Classi- fication Items Func- tion Default RAM Contents Proce- dure 05/05
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 63 2 2.2.6 Adjustment mode (05) (e-STUDIO202L/232/282) Procedure 1 Procedure 2 Procedure 3 Procedure 4 Items in the adjustment mode list in the following pages can be corrected or changed in the adjust- ment mode (05). Turn ON the power with pressing the digital keys [0] and [5] simultaneously in order to enter this mode. [0][5] [POWER] [POWER] OFF/ON (Exit)[Digital key] (Code) [START] [CANCEL] [Digital key] *[FUNCTION CLEAR] (Key in a value) [CLEAR] (Corrects value) [ENTER] or [INTERRUPT] (Stores value in RAM) ([FAX]) (Test copy) *Press [ FUNCTION CLEAR] to enter minus (-). [0][5] [POWER] [POWER] OFF/ON (Exit)(Code) [START] [ENTER] or [INTERRUPT] (Value unchangeable) ([FAX]) (Test copy) Value displayed( ) [0][5] [POWER] [POWER] OFF/ON (Exit)[Digital key] (Code) [START] [CANCEL] [UP] or [DOWN] (Adjust a value) [CLEAR] (Corrects value) [ENTER] or [INTERRUPT] (Stores value in RAM) ([FAX]) (Test copy) [0][5] [POWER] [POWER] OFF/ON (Exit) [Digital key] (Code) [Digital key] * [FUNCTION CLEAR][START] [START] [Digital key] (Sub code) [CLEAR] (Corrects value) [CLEAR] (Corrects value) [ENTER] or [INTERRUPT] *Press [FUNCTION CLEAR] to enter minus (-). (Key in a value) Stores value in RAM ( ) ([FAX]) (Test copy) [CANCEL] [START] 05/12
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 64 Procedure 6 * When the automatic adjustment ends abnormally, err or message is displayed. Procedure 7 * When the automatic adjustment ends abnormally, err or message is displayed. Procedure 10 Procedure 17 * When the “storing is not performed within 2 minute s after pressing the [START] button at the manual adjustment, the “automatic adjustment” start s automatically. Note: Note: The fuser roller temperature control at the adjustm ent mode is different from that at the normal state. Therefore, the problem of fusing efficiency may be occurred in the test copy at the adjustment mode. In that case, turn ON the power normally, lea ve the equipment for approx. 3 minutes after it has become ready state and then start up the adj ustment mode again. [0][5] [POWER] [POWER]OFF/ON (Exit)[Digital key] (Code) [START]( )Automatic adjustment ([FAX]) (Test copy) *[CANCEL] or [CLEAR] [0][5] [POWER] [POWER] OFF/ON (Exit)[Digital key] (Code) [START]( )Automatic adjustment ([FAX]) (Test copy) *[CANCEL] or [CLEAR] [CANCEL] ( ) [ENTER] Stores value in RAM [0][5] [POWER] [POWER] OFF/ON (Exit) [Digital key] (Code) [Digital key] (Sub code) [START] [START] [START] [SET] or [INTERRUPT] (Value unchangeable)( )Value displayed [0][5] [POWER] [POWER] OFF/ON (Exit) [Digital key] (Code) [START] Automatic adjustment [ENTER] or [INTERRUPT] Stores value in RAM ( ) [ENTER] or [INTERRUPT] Stores value in RAM ( ) ([FAX]) (Test copy)[UP] or [DOWN] (Adjust a value) [CANCEL] or [CLEAR] ( ) [UP] or [DOWN] (Adjust a value) [CANCEL] or [CLEAR] )(Manual adjustment 05/12