Toshiba Estudio 230 Manual

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 155
2
206 User  interface Auto Shut Off Mode timer  
setting (Auto Shut Off  
Mode/Sleep Mode) ALL Refer to 
content SYS Timer to turn OFF the 
power or to enter the 
Sleep Mode automati- 
cally when the equip-
ment has not been  
used 
(Refer to 08-601)
0: 3min. 1: 5min. 
2: 10min. 3: 15min. 
4: 20min. 5: 25min. 
6: 30min. 7: 40min. 
8: 50min. 9: 60min. 
10: 70min. 
11: 80min. 
12: 90min. 
13: 100min.
14: 110min. 
15: 120min. 
16: 150min.
17: 180min. 
18: 210min. 
19: 240min.
20: Not used
 
e-STUDIO232/282:EUR: 7   UC: 9   
JPN: 0   Others: 9
e-STUDIO202L: 6 1
207 User  interface Highlighting display on  
LCD ALL 0
 SYS 0: Black letter on white 
background
1: White letter on black  background 1
209 User  interface Default setting of filing for- 
mat when E-mailing ALL 0
 SYS 0: TIFF (Multi)
1: PDF (Multi)
2: Not used 
3: TIFF (Single) 
4: PDF (Single) 1
210 Paper  feeding Paper size (A6-R) feeding/
widthwise direction PRT 148/105
 M 10
213 User  interface Display of [REVERSE 
ORDER] button ALL 0
 SYS 0: Not displayed
1: Displayed 1
219 User  interface Default setting of filing for- 
mat when storing files SCN 0
 SYS 0: TIFF (Multi)
1: PDF (Multi) 
2: Not used
3: TIFF (Single) 
4: PDF (Single) 1
220 User  interface Language displayed at  
power-ON ALL EUR: 0
UC: 0
JPN: 5  SYS 0: Language 1
1: Language 2
2: Language 3 
3: Language 4 
4: Language 5
5: Language 6 
6: Language 7 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 156
221 User 
interface Language selection in UI  
data at Web power ON ALL EUR: 0
UC: 0
JPN: 5
 SYS 0: Language 1
1: Language 2 
2: Language 3 
3: Language 4
4: Language 5 
5: Language 6 
6: Language 7 1
224 Paper  feeding Paper size for bypass feed PPC UNDEF SYS Press the butto
n on the 
LCD to select the size. 9
225 Paper  feeding Paper size for upper  
drawer ALL EUR: A4
UC: LT
JPN: A4 M Press the button on the 
LCD to select the size. 9
226 Paper  feeding Paper size for lower  
drawer ALL EUR: A3
UC: LD
JPN: A3 M Press the button on the 
LCD to select the size. 9
227 Paper  feeding Paper size for PFP upper 
drawer ALL EUR:
A4-R
UC: LT-R
JPN: A4-R M Press the button on the 
LCD to select the size. 9
228 Paper  feeding Paper size for PFP lower 
drawer ALL EUR: A4
UC: LG
JPN: B4 M Press the button on the 
LCD to select the size. 9
229 Paper  feeding Paper size (A3) feeding/ 
widthwise direction ALL 420/297
 M 10
230 Paper  feeding Paper size (A4-R) feeding/
widthwise direction ALL 297/210
 M 10
231 Paper  feeding Paper size (A5-R) feeding/ 
widthwise direction ALL 210/148
 M 10
232 Paper  feeding Paper size (B4) feeding/ 
widthwise direction ALL 364/257
 M 10
233 Paper  feeding Paper size (B5-R) feeding/
widthwise direction ALL 257/182
 M 10
234 Paper  feeding Paper size (LT-R) feeding/
widthwise direction ALL 279/216
 M 10
235 Paper  feeding Paper size (LD) feeding/ 
widthwise direction ALL 432/279
 M 10
236 Paper  feeding Paper size (LG) feeding/ 
widthwise direction ALL 356/216
 M 10
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 157
2
237 Paper  feeding Paper size (ST-R) feeding/ 
widthwise direction ALL 216/140
 M 10
238 Paper  feeding Paper size (COMPUTER)  
feeding/widthwise direction ALL 356/257
 M 10
239 Paper  feeding Paper size (FOLIO) feed- 
ing/widthwise direction ALL 330/210
 M 10
240 Paper  feeding Paper size (13” LG) feed-
ing/widthwise direction ALL 330/216
 M 10
241 Paper  feeding Paper size (8.5”X8.5”)  
feeding/widthwise direction ALL 216/216
 M 10
242 Paper  feeding Paper size (Non-standard)  
feeding/widthwise direction ALL 432/279
 SYS 10
243 Paper  feeding Memory 1
Paper size (bypass feed-
ing/non-standard type)  
feeding/widthwise direction ALL 148/100
 SYS Registers the paper 
size of bypass feed  
(non-standard type) into  
[MEMORY 1]. 10
244 Paper  feeding Paper size (8K) feeding/ 
widthwise direction ALL 390/270
 M 10
245 Paper  feeding Paper size (16K-R) feed- 
ing/widthwise direction ALL 270/195
 M 10
247 Paper  feeding Memory 2
Paper size (bypass feed-
ing/non-standard type)  
feeding/widthwise direction ALL 148/100
 SYS Registers the paper 
size of bypass feed  
(non-standard type) into  
[MEMORY 2]. 10
248 Paper  feeding Memory 3 
Paper size (bypass feed- 
ing/non-standard type)  
feeding/widthwise direction ALL 148/100
 SYS Registers the paper 
size of bypass feed  
(non-standard type) into  
[MEMORY 3]. 10
249 Paper  feeding Memory 4 
Paper size (bypass feed- 
ing/non-standard type)  
feeding/widthwise direction ALL 148/100
 SYS Registers the paper 
size of bypass feed  
(non-standard type) into  
[MEMORY 4]. 10
250 Mainte- nance Service technician tele- 
phone number ALL 0
 SYS A telephone number 
can be entered up to 32 
digits. Use the [Monitor/ 
Pause] button to enter a  
hyphen (-). 11
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 158
251 Mainte-
nance Setting value of PM  
counter ALL Refer to 
content
 M 
e-STUDIO200L 
UC, EUR: 64,000 
JPN: 0
e-STUDIO 230 
UC, EUR: 74,000 
JPN: 0
e-STUDIO 280 
UC, EUR: 90,000 
JPN: 0 1
252 Mainte- nance Current value of PM 
counter Display/0 clearing ALL 0
 M Counts up when the 
registration sensor is  
ON. 1
253 Mainte- nance Error history display ALL - SYS Displaying of the lates
t 
20 errors data 2
254 Paper  feeding LT  A4/LD  A3 PRT 0
SYS Sets whether the data is 
printed on the different 
but similar size paper or  
not when the paper of 
corresponding size is  
not available. 
0: Valid (The data is printed on A4/A3 
when LT/LD is  
selected or vice  
versa.)
1: Invalid (The mes- sage to use the 
selected paper size 
is displayed.) 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 159
2
255 Paper  feeding PFP/LCF installation ALL 0
 M Sets the installation sta-
tus of the PFP or LCF,  
and also disables its  
functions and the lower 
drawer of the equip- 
ment. 
When 0 is set at 08-
477, specify the value  
from 1 to 4 or 16 to 20,  
and when 1 is set at  
08-477, specify the  
value only from 32 to  
36. 
0: Auto 
When only the upper  
drawer is installed as 
the paper feeder of the  
equipment. 
1: PFP upper-drawer type installed
2: PFP upper-drawer 
and lower-drawer 
type installed
3: LCF installed 
4: Disables PFP or  LCF
When the upper and 
lower drawers are  
installed as the paper  
feeder of the equip- 
ment. 
16:  PFP and LCF not   installed
17:  PFP upper-drawer 
 type installed
18:  PFP upper-drawer   and lower-drawer  
 type installed
19:  LCF installed 
20:  Disables functions   of PFP or LCF
Disables the lower  
drawer when the upper  
and lower drawers are  
installed as the paper  
feeder of the equip- 
ment.
32:  PFP and LCF not   installed
33:  PFP upper-drawer   type installed
34:  PFP upper-drawer 
 and lower-drawer 
 type installed
35:  LCF installed
36:  Disables functions 
 of PFP or LCF 1
256 Paper  feeding Paper size setting /LCF ALL EUR: A4
UC: LT
JPN: A4 M Press the button on the 
LCD to select the size. 9
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 160
257 Counter Counter copy ALL -
- 1) Electrical counter  
 Backup counter
2) Backup counter   
Electrical counter 
(P. 2-239 Fig. 2-7) -
258 Mainte- nance FSMS acceptance ALL 1
SYS Sets whether the FSMS 
connection is accepted  
or not. 
0: Prohibited 
1: Accepted (USB nor-
mal connection)
2: Accepted (USB  forcible connection) 1
259 Network Storage period trial and pri- vate PRT 14
 SYS 0: No limits
1 to 30: 1 to 30 days 
31: 1hour 
32: 2hours 
33: 4hours 
34: 8hours 
35: 12hours 1
260 Network Web data retention period SCN 10 SYS When a certain period 
of time has passed  
without operation after 
accessing TopAccess,  
the data being regis- 
tered is automatically 
reset. This period is set  
at this code. 
(Unit: Minute) 1
263 User  interface Administrators password
(Maximum 10 digits) ALL 123456
 - The password can be 
entered in alphabets  
and figures (A-Z, a-z, 0- 
9) within 10 digits. 11
264 Network File retention period SCN 30 SYS 0: No limits
1 to 999: 1 to 999 days 1
265 Network Maximum data capacity at  E-mailing SCN 30
 SYS 2 to 30 M bytes 1
266 Network Maximum data capacity at  Internet FAX ALL 30
 SYS 2 to 30 M bytes 1
267 Elec- tronic Fil-ing Full guarantee of docu-
ments in Electronic Filing  
when HDD is full ALL 0
 SYS Sets the file retention 
level when editing the 
files in the Electronic  
Filing (at CutDoc/Save-
Doc command execu- 
tion). 
0: Not full retained
1: Fully retained - Retains the source 
file until CutDoc/
SaveDoc command  
is completed.
* The file is not 
deleted even if the 
HDD has become  
full during the exe-
cution of command  
when “1” is set. 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
06/01 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 161
2
270 Elec- tronic Fil-ing Default value for user box  
retention period
ALL 0
 SYS Sets the data retention 
period when creating a  
user box. 
0: Not deleted
1 to 999: Retention  
period (Unit: Day) 1
271 General Warning notification of the  File Share and e-Filling  
partitions are filled ALL 90
 SYS Sets the percentage of 
HDD partition filled  
when warning notifica- 
tion is sent. 
0 to 100: 0 to 100%
* Related code 08-288 1
272 Scanning Notification setting of E- mail saving time limit ALL 3
 SYS Sets the days left the 
notification of E-mail 
saving time limit  
appears 
0 to 99: 0 to 99 days 1
273 Scanning Default setting of partial  size when transmitting E- 
mail ALL 0
 SYS Sets the default value 
for the partial size of E-
mail to be transmitted  
when creating a tem-
plate. 
0: Not divided 
1: 64 2: 128 
3: 256 4: 512 
5: 1024 
6: 2048 (Unit: KB) 1
274 FAX Default setting of page by  page when transmitting  
Internet FAX FAX 0
 SYS Sets the default value 
for the page by page of  
Internet FAX to be  
transmitted when creat- 
ing a template. 
0: Not divide 1: 128 
2: 512 3: 1024 
4: 2048 (Unit: KB) 1
276 User  interface Default setting for density  
adjustment SCN 0
 SYS 0: Automatic density
1: Step -5 
2: Step -4 
3: Step -3
4: Step -2 
5: Step -1 
6: Step 0 (center)
7: Step +1 
8: Step +2 
9: Step +3
10: Step +4 
11: Step +5 
(1 to 11: Manual den-
sity) 1
281 User  interface Default setting of resolution SCN 1
SYS 0: 150 dpi 1: 200 dpi
2: 300 dpi 3: 400dpi 
4: 600 dpi 1
283 User  interface Default setting of original  
mode SCN 0
 SYS 0: Text
1: Text/Photo 
2: Photo 
3: Gray scale 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 162
284 User 
interface Default setting of scanning  
mode SCN 0
 SYS 0: Single 1: Book
2: Tablet 1
285 User  interface Default setting of rotation  
angle of original SCN 0
 SYS 0: 0 degree
1: 90 degrees 
2: 180 degrees 
3: 270 degrees 1
286 User  interface Default setting of original  
paper size SCN 0
 SYS 0: Automatic
1: A3 2: A4 
3: LD 4: LT
5: A4-R 6: A5-R 
7: LT-R 8: LG 
9: B4 10: B5
11: ST-R 12: COMP 
13: B5-R 14: FOLIO 
15: 13”LG
16: 8.5” x 8.5” 
18: A6-R 
19: Size mixed
20: 8K 21: 16K  
22: 16K-R 1
288 General Searching interval of delet- ing expired flies and check- 
ing capacity of HDD 
partitions ALL 12
 SYS Sets the search inter-
val of deleting expired 
files and checking 
capacity of HDD parti- 
tion. 
(Unit: Hour)
* Related code 08-271 1
290 Network Raw printing job (Duplex) PRT 1 SYS 0: Valid
1: Invalid 1
291 Network Raw printing job (Paper size) PRT EUR: 6
UC: 2
JPN: 6
 SYS 0: LD 1: LG
2: LT 3: COMP 
4: ST 5: A3 
6: A4 7: A5
8: A6 9: B4 
10: B5 11: FOLIO 
12: 13”LG 
13: 8.5” x 8.5” 1
292 Network Raw printing job (Paper type) PRT 0
 SYS 0: Plain paper
1: Thick paper 1 
2: Thick paper 2
3: Thick paper 3 
4: OHP film 
5: Tab paper 1
293 Network Raw printing job (Paper direction) PRT 0
 SYS 0: Portrait
1: Landscape 1
294 Network Raw printing job (Staple) PRT 1 SYS 0: Valid
1: Invalid 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 163
2
295 Network Raw printing job (receiving tray) PRT 0
 SYS 0: Inner tray
1: Finisher tray 1 
2: Finisher tray 2 
3: Not used
4: Job Separator upper tray
5: Job Separator lower  tray
* The settings 4 and 5 
are effective only 
when the Job Sepa- 
rator (MJ-5004) is  
installed. 1
296 Network Raw printing job (Number of form lines) PRT 1200
 SYS Sets the number of 
form lines from 5 to  
128. (A hundredfold of  
the number of form 
lines is defined as the  
setting value.) 1
297 Network Raw printing job (PCL font pitch) PRT 1000
 SYS Sets the font pitch from 
0.44 to 99.99. (A hun- 
dredfold of the font 
pitch is defined as the  
setting value.) 1
298 Network Raw printing job (PCL font size) PRT 1200
 SYS Sets the font size from 
4 to 999.75. (A hun- 
dredfold of the font size  
is defined as the setting  
value.) 1
299 Network Raw printing job (PCL font number) PRT 0
 SYS Sets the PCL font num-
ber. 1
300 User  interface Maximum number of copy  
volume (MAX9) PPC 0
 SYS 0: 999 1: 99
2: 9 1
302 User  interface Original counter display ALL EUR: 2
UC: 0
JPN: 0
 SYS Sets whether the origi-
nal counter is dis- 
played or not. 
0: Not displayed 
2: Displayed 
4: Displayed (Double-sized original is 
counted as 2.) 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 164
305-0 Counter Number of 
output pages  
in copier func- 
tionA3 PPC 0
SYS Counts the output 
pages in the copier  
function for each paper  
size according to the 
setting for the count  
setting of large-sized  
paper (08-352) and the 
definition setting of  
large-sized paper (08- 
353). 4
305-1 A4 
305-2 A5
305-3 A6 
305-4 B4 
305-5 B5 
305-6 FOLIO 
305-7 LD 
305-8 LG 
305-9 LT
305-10 ST
305-11 COMP
305-12 13”LG
305-13 8.5” x 8.5” 
305-14 16K 
305-15 8K
305-16 Others 306-0 Counter Number of  output pages  
in printer func- 
tionA3 PRT 0
SYS Counts the output 
pages in the printer  
function for each paper  
size according to the  
setting for the count 
setting of large-sized  
paper (08-352) and the  
definition setting of 
large-sized paper (08- 
353). 4
306-1 A4 
306-2 A5 
306-3 A6 
306-4 B4 
306-5 B5 
306-6 FOLIO 
306-7 LD 
306-8 LG
306-9 LT
306-10 ST 306-11 COMP
306-12 13”LG
306-13 8.5” x 8.5” 
306-14 16K 
306-15 8K 
306-16 Others Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11