Toshiba Estudio 230 Manual

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 245
2
- Type of calculated data Since this is multifunctional, the data of pixel co unt is calculated for each function.
The following list is the information that can be c onfirmed by LCD screen. But actually, more 
information can be confirmed by the setting mode (08 ).
See after-mentioned “5)-Display in the setting mode  (08)” for details.
: With data
 : Without data
Table 2-201 Type of calculated data
- Setting related with the pixel counter function Standard paper size setting 
The standard paper size (A4 or LT) to convert it in to the pixel count is selected (08-1500).
Pixel counter display setting 
Whether or not to display the pixel counter on the  LCD screen is selected (08-1504).
Display reference setting
The reference when displaying the pixel counter on  the LCD screen (toner cartridge reference or 
service technician reference) is selected (08-1505) .
Determination counter of toner empty
This is the counter to determine the replacement of  new toner cartridge after the toner empty is 
detected. 
After the toner empty is detected by the auto-toner  sensor, this counter checks if toner empty is 
not detected one more time while the specified numb er of pixel count or output pages is counted.
Pixel counter clearing 
There are 3 types for the pixel count clear as follo ws:
08-1501: All information related to the pixel count  is cleared.
08-1502: All information related to the service tec hnician reference pixel count is cleared.
08-1503: All information related to the toner cartr idge reference pixel count is cleared.
Toner cartridge reference Service technician referen ce
Copier function  
Printer function  
FAX function  
Total  
05/05 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 246
4) Relation between pixel count and toner consumptio n
The user’s printing out the image with large coverag e or high density may cause the large value of 
pixel count. And the setting that toner consumption  becomes high in the original mode or density 
setting may cause it as well. 
In this case, the replacement cycle of toner cartri dge is faster than the standard number of output 
pages. Therefore, this trend needs to be grasped fo r the service.
The relation between pixel count and number of outp ut pages per cartridge is as follows:
 Fig. 2-11 Pixel count and number of output pages per cartridge
6% 12%60%
X
X/2
X/10
Standard number of output pages
Number of output pages per cartridge (page)
Pixel count (%)
05/05 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 247
2
5) Pixel counter confirmation - Display on LCD screenWhether or not to display the pixel counter on the  LCD screen is selected (0: Displayed, 1: Not 
displayed) in the setting mode (08-1504), and wheth er or not to display it at the service techni-
cian reference or toner cartridge reference is sele cted (0: Service technician reference, 1: Toner 
cartridge reference) in the setting mode (08-1505). 
The following screen is displayed when the buttons,  [USER FUNCTIONS], [COUNTER] and 
[PIXEL COUNTER] are pressed in this order after “Di splayed” is selected with the code above 
and the power is, as usual, turned ON. 
The following screen is displayed when the toner ca rtridge reference is selected in the setting 
mode (08-1505).
 Fig. 2-12 Information screen of toner cartridge re ference
The following screen is displayed when the service  technician reference is selected in the setting 
mode (08-1505).
 Fig. 2-13 Information screen of service technician reference   
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 248
- Data list printingThe data for pixel counter can be printed in the li st print mode (9S).
9S-104: The data of the toner cartridge reference i s printed.
9S-105: The data of service technician reference is  printed.
 Fig. 2-14 Data list of toner cartridge reference
 Fig. 2-15 Data list of service technician reference
PIXEL COUNTER CODE LIST 
TONERCARTRIDGE
No 0  
1  
2  DATE
20040711  
20040711  
20040711 FAX
12345  
12345  
12345 
PPC
12345  
12345  
12345 PRN
23456  
23456  
23456 TOTAL
45678  
45678  
45678
2004.7.11  09:55
Print Count [LT/A4] 
Average  Pixel Count [%]
Latest Pixel Count [%]
PIXEL COUNTER CODE LIST 
SERVICEMAN
No 0  
1  
2  DATE
20040711  
20040711  
20040711 FAX
12345  
12345  
12345
PPC
12345  
12345  
12345 PRN
23456  
23456  
23456 TOTAL
45678 
45678  
45678
2004.7.11  09:55
Print Count [LT/A4]
Average  Pixel Count [%] 
Latest Pixel Count [%] 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 249
2
- Display in the setting mode (08) Information of pixel count can be also checked in t he setting mode (08).
For details, see   P. 2-83 2.2.7 Setting mode (08) (e-STUDIO200L/230 /280)/ P. 2-152 
2.2.8 Setting mode (08) (e-STUDIO202L/232/282). 
Print count, pixel count
Table 2-202 Pixel count code table
Pixel count distribution
Table 2-203 Pixel count code table
Toner cartridge reference Service technician referen ce
Copier 
function Print count
(page) 1553 1548
Average pixel count (%) 1613 1592
Latest pixel count (%) 1639 1606
Printer 
function Print count
(page) 1555 1550
Average pixel count (%) 1619 1593
Latest pixel count (%) 1640 1607
FAX 
function Print count
(page) 1556 1551
Average pixel count (%) 1625 1594
Latest pixel count (%) 1634 1608
Total Average pixel count (%) 1624 1595
Pixel count distribution (page)
Copier function 1649 
Printer function 1650 FAX function 1651
Note: Note:  By entering the sub code at the above code, the pix el count distribution can be displayed divid-
ing into 10 ranges. The sub codes are as follows. 
0: 0 - 5% 1: 5.1 - 10% 2: 10.1 - 15% 3: 15.1 - 20% 4: 2 0.1 - 25%
5: 25.1 - 30% 6: 30.1 - 40% 7: 40.1 - 60% 8: 60.1- 80% 9: 80.1 - 100%
05/12 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 250
Other information 
Toner cartridge replacement counter
The toner cartridge replacement count is displayed.  (08-1566)
Toner cartridge reference count started date
The toner cartridge reference count started date is  displayed. (08-1518)
Service technician reference cleared date
The service technician reference cleared date is dis played.(08-1510)
The date (08-1502 was performed) is stored. 
Toner cartridge reference cleared date 
The toner cartridge reference cleared date is displ ayed.
The date (08-1503 was performed) is stored. 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 251
2
2.2.10 Classification List of Adjustment Mode (05) / Set ting Mode (08) 
(e-STUDIO200L/230/280)
Classification e-STUDIO200L/230/280
Adjustment Mode (05) Setting Mode (08)
User interface [Date/Time] 200, 638, 640
[Timer] 204, 205, 206, 260 
[Screen] 207, 602, 1132 
[File] 209, 219, 264, 288 
[Language] 220, 221
[Administrator] 263 
[Scanning] 265, 266, 273, 274 
[Filing] 267, 270, 950, 976, 980, 981, 985  
[HDD] 271 [E-mail] 272, 1097, 1098 
[default setting] 276, 281, 283, 284, 285, 286,  
331, 480, 503, 550, 603, 604, 607, 618, 642, 
682, 969, 986, 1135 
[Raw printing] 290, 291, 292, 293, 294, 295,  
296, 297, 298, 299, 973, 978, 979 
[Copy volume] 300 [Original counter] 302 
[Custom Mode] 508 
[Energy saving] 601, 948, 970
[AMS] 605 [Sound] 610 [Book duplexing] 611  
[Summer time] 612 [Paper size] 613 
[Department management] 617 620, 621, 622,  
623, 624, 629, 672 
[Sorting] 627, 634, 641, 649 
[Original direction] 628 [Image shift] 636 
[Edit copying] 645, 646
[Box printing] 647, 953, 954 
[X in 1] 650 [Annotation] 651, 657 
[Automatic transfer] 660, 661
[Indicator] 671 [Priority drawer] 689 
[Media type] 697 [Job Build] 1130, 1131
Scanner [Position] 305, 306 [Distortion] 308 
[Reproduction ratio] 340 
[Carriage position] 359
Image [Margin] 430, 431, 432, 433, 434-0 to 1, 435,  436, 437, 438 
[Image density] 501, 503, 504, 505, 506, 507,  
508, 509, 510, 512, 514, 515, 710, 714, 715,  
719, 720, 724, 725, 729, 845, 846, 847, 850, 
851, 852, 855, 856, 857, 860, 861, 862, 931,  
932, 933, 934, 935, 936, 937, 938, 939, 940,  
941, 942 
[Range correction] 532, 533, 534, 570, 571,  
572, 693, 694, 695, 820, 821, 822, 825, 826,  
827, 830, 831, 832, 835, 836, 837, 913, 914, 
915, 916, 917, 918, 919, 920, 921 
[Gamma slope] 593, 594, 595, 943, 944, 945 
[Sharpness] 620, 621, 622, 865-0 to 2, 866-0 
to 2, 867-0 to 2, 922, 923, 924 
[Smudged/Faint text] 653, 654, 655, 928 
[Printer density] 667-0 to 4, 672-0 to 4, 676-0  
to 4 
[Binarizing] 700, 701, 702 [Error diffusion / Dither] 502, 509
Drive [Main motor] 421, 422 [Exit motor] 424, 425
05/12 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 252
Paper feeding [Aligning amount] 448-0 to 2, 449-0 to
 2, 450-0 
to 2, 452-0 to 2, 455-0 to 2, 457, 458-0 to 2,  
460-0 to 2, 461-0 to 2, 462-0 to 3, 463-0 to 2, 
464-0 to 2, 469-0 to 5, 470-0 to 2, 471-0 to 2,  
472-0 to 2, 473, 474-0 to 2 
[Paper pushing amount] 466-0 to 7 [paper dimension] 210, 229, 230, 231, 232,  
233, 234, 235, 236, 237, 238, 239, 240, 241,  
242, 243, 244, 245, 337, 338, 339, 340, 341, 
471 
[Paper feeding] 254, 255, 481, 619, 658, 659,  
988, 1133
[Retry] 463-0 to 1, 464-0 to 1, 465-0 to 1, 466- 
0 to 1, 467-0 to 1,468-0 to 1, 482, 1390, 1391,  
1392, 1393, 1394, 1395, 1396, 1397, 1398, 
1399, 1400, 1401 
[Paper size] 224, 225, 226, 227, 228, 247,  
248, 249, 256 
[Blank copying prevention] 625
Laser [Laser power] 286 [Polygonal motor] 401, 405
[Write starting] 410, 411, 440, 441, 442, 443,  
444, 445, 498-0 to 1 
[Sideways deviation] 497-0 to 5 [Polygonal motor] 398, 399, 478, 479, 483,  
484, 485, 486, 488, 489, 490 
[Power correction] 872, 873, 875, 876, 877
Development [Auto-toner] 200, 201 [Auto-toner] 414, 4 55
High-voltage  transformer [Main charger bias] 210 
[Developer bias] 205
[Transfer bias] 220, 221, 222 
[Separation bias] 233, 234, 235 [Transfer bias] 491, 492, 493, 830, 868, 869 
[Main charger bias] 805, 806, 807, 808, 809, 
826, 864, 865, 866, 867 
[Developer bias] 833, 834, 835, 836, 837, 859,  
860, 861, 862, 863
[Separation bias] 831, 870, 871
Fuser [Status counter] 400
[Temperature] 404-0 to 3, 405-0 to 3, 407, 409,  
410, 411, 412, 413, 424-0 to 3, 425-0 to 3,  
433-0 to 1, 437, 438, 448, 450, 451, 452, 453,  
515, 516, 518, 520, 521, 525-0 to 3, 527-0 to  
3, 535, 536-0 to 3, 537-0 to 3, 800-0 to 1, 801- 
0 to 1, 802-0 to 1, 803-0 to 1, 804-0 to 1, 886, 
896-0 to 1 
[Pre-running] 417, 439, 440, 441, 523, 526
RADF [Aligning amount] 354, 355 [Sensors/EEPROM] 356, 367, 368 
[Transporting] 357, 358, 365, 366 [Switchback] 462
Finisher [Folding / Binding position] 468-0 to 2 [Tra y reset] 648
[Cascade] 652, 653
Classification
e-STUDIO200L/230/280
Adjustment Mode (05) Setting Mode (08)
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 253
2
Network [NIC] 1001, 1002, 1003, 1004, 1120
[IP address] 1005, 1006, 1007, 1008, 1009,  
1010 [IPX] 1011, 1099
[Frame type] 1012 [NCP] 1013 
[AppleTalk] 1014, 1015  
[LDAP] 1016, 1138, 1139, 1486
[DNS] 1017, 1018, 1019 [DDNS] 1020 
[SLP] 1021 [NetBios] 1023 [WINS] 1024, 1025  
[Bindery] 1026 
[NDS] 1027 [Directory] 1028, 1029 
[HTTP] 1030, 1031, 1032, 1033, 1034, 1035 
[SMTP] 1037, 1038, 1039, 1040, 1041, 1042, 
1100, 1101, 1102 
[Offramp] 1043, 1044, 1045 
[POP3] 1046, 1047, 1048, 1049, 1050, 1051,  
1052 
[FTP] 1053, 1054, 1055, 1056, 1057, 1058,  
1059, 1060, 1061, 1062, 1089, 1090, 1091, 
1092 
[MIB] 1063 [Community] 1065, 1066 
[TRAP] 1067, 1068, 1069, 1070 
[Raw/TCP] 945, 1073, 1074 
[LPD] 1075, 1076, 1077 
[IPP] 1078, 1079, 1080, 1081, 1082, 1083,  
1084, 1085, 1086, 1087, 1088
[Novell] 1093, 1094 [SerchRoot] 1095 
[Print queue] 1096 [Rendezvous] 1103 
[SMB] 1117, 1136 [ASCII code] 977
[Link local host name] 1104  
[Service name] 1105 [Host name] 1112 
[Internet FAX] 1114, 1485
[Workgroup name] 1124 [Private print] 1432 
[Function] 1433, 1434 [Scan to E-mail] 1484 
[From Address] 1487, 1488, 1489
[E-mail domain] 1491
Counter [External counter] 202, 381, 683, 975, 1126
[Counter copy] 257 
[Paper size] 305-0 to 16, 306-0 to 16, 307-0 to 
16, 308-0 to 16, 312-0 to 16, 313-0 to 16, 314- 
0 to 16, 315-0 to 16, 316-0 to 16 
[Large/Small size] 320-0 to 2, 321-0 to 2, 322-
0 to 2, 323-0 to 2, 327-0 to 2, 328-0 to 2, 329-0  
to 2, 330-0 to 2, 332-0 to 2, 335-0 to 2 
[Double count] 345, 346, 347, 348, 349, 352,  
353 
[Paper source] 356, 357, 358, 359, 360, 370,  
372, 374
[HDD] 390, 391, 392, 393 
[Fuser unit] 1372, 1378, 1380, 1382 
[Toner cartridge] 1376, 1410
[Media type] 1385, 1386, 1387, 1388, 1411
Version [System firmware] 900, 920, 921, 922, 923, 
924, 925, 926, 927, 928, 929, 930, 931, 933, 
934, 935, 936, 937, 938, 939, 944 
[Engine firmware] 903, 905, 907, 908 
[FAX] 915 [NIC] 916
Classification
e-STUDIO200L/230/280
Adjustment Mode (05) Setting Mode (08)
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 254
Maintenance
[PM counter] 251, 252 [Telephone] 250
[Error history] 253 [FSMS] 258, 999 
[Service notification] 702, 703, 707, 715, 716, 
717, 718, 719, 720, 721, 723, 767, 768, 769,  
770, 771, 772, 773, 774, 775, 776, 777, 778,  
779, 780, 781, 782, 783, 784, 785, 786, 787, 
788, 789, 790, 796 
[HTTP] 726, 727, 728, 729, 730, 731 
[Supply order] 732, 733, 734, 738, 739, 740, 
741, 742, 743, 744, 745, 746, 747, 748, 758,  
759, 760, 764, 765, 794, 1145 
[Firmware download] 797
[Emergency Mode] 710, 711
Others [Equipment number] 976 [Toner recycle] 280 [Destination] 201, 701, 849 [Line] 203 
[Private printing] 259 [Local I/F] 614 
[Memory] 615 [Partition] 662, 666, 667 
[Clear] 693 [Trial period] 673, 695, 798, 799 
[Banner] 678, 679, 680, 681 
[Database] 684, 685, 686
[HDD] 670, 690, 691, 694, 1422, 1424, 1426  
[Control panel] 692 
[Scrambler board] 696, 698, 699 
[Data overwrite kit] 633 
[Equipment number] 995 
[Toner recycle] 838 
[Machine identification information] 477
[Temperature/humidity] 839 
[Initialization] 947 [Mode setting] 949 
[Template] 1140 [NVRAM] 1427 [SRAM] 1428
Classification
e-STUDIO200L/230/280
Adjustment Mode (05) Setting Mode (08)
05/11