Toshiba Estudio 230 Manual

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 215
2
1449 Network IPP authentication method ALL 1 - 1:  Disabled
2:  Basic 
3:  Digest 
4:  Basic Digest 12
1450 Network User name for IPP authen- tication ALL - - This should be the 
account at the time IPP  
authentication was per- 
formed. 12
1451 Network Password for IPP authenti- cation ALL - - This should be the 
password of the  
account at the time IPP  
authentication was per-
formed. 12
1464 Network Samba server ON/OFF  setting ALL 1
 NIC 1: Samba enabled
2: Samba disabled
3: Print Share disabled
4: File Share disabled 12
1470 General Device authentication func- tion setting ALL 0
 SYS 0: OFF
1: ON 1
1471 General User authentication  method ALL 0
 SYS 0:  Local
1:  NTLM (NT Domain)
2:  LDAP
3:  Kerberos (Active Directory)
4:  Netware 1
1472 General User data management  automatic registration func- 
tion setting ALL 0
 SYS 0: Disabled
1: Enabled 1
1473 General User data management  limitation setting ALL 0
 SYS 0: Disabled
1: Enabled 1
1474 General User data management  limitation
Setting by number of print- 
outs ALL 0
 SYS 0-9,999,999:
0-9,999,999 sheets 1
1476 Network Restriction on Address  book operation by adminis- 
trator ALL 0
 SYS Some restrictions can 
be given on the admin-
istrator for operating the  
Address book.
0:  No restriction 
1: Can be operated 
only under the  
administrators  
authorization 1
1477 Network Restriction on To (cc)   address ALL 0
 SYS 0:  No restriction
1:  Can be set from 
both of the Address 
book and LDAP  
server
2:  Can be set only  from the Address 
book
3:  Can be set only  from the LDAP 
server 1
1478 User  interface Display of paper size set-
ting by installation opera- 
tion of drawers ALL JPN: 0
UC: 1
EUR: 0
 SYS 0: Not displayed
1: Displayed 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 216
1479 User 
interface Default setting of sharp- 
ness ALL 5
 SYS 1: -4 2: -3
3: -2 4: -1 
5: 0     6: +1 
7: +2    8: +3    9: +4 1
1481 General User data management  clearing ALL - - All the user data in the 
database and backup  
files can be deleted. 3
1482 General User data department  management ALL 0
 SYS 0: Invalid
1: Valid 
* When this code is set to “1” (Valid), the 
department man-
agement setting  
(08-629) should be  
“1” (Valid). 1
1483 General User data recovery ALL - - The data in the d ata-
base is overwritten with  
the data in the backup  
file. 3
1484 Network Authentication method of  Scan to Email” ALL 0
 SYS 0: Disable
1: SMTP authentica-
tion
2: LDAP authentica-
tion 1
1485 Network Setting whether use of  Internet FAX is permitted  
or not when it is given an  
authentication ALL 0
 SYS 0: Not permitted
1: Permitted 1
1486 Network Server setting for LDAP  user authentication ALL 0
 SYS 2
1487 Network From address assign- ment method when it is  
given an authentication ALL 0
 SYS 0: User name + @ + 
Domain name
1: LDAP search 
2: Use the address 
registered in From  
field of E-mail set- 
ting 1
1488 Network ID setting of LDAP server  for From address assign- 
ment ALL 0
 SYS 2
1489 Network Setting for From address  edit at Scan to Email” ALL 0
 SYS 0: Not permitted
1: Permitted 1
1491 Network E-mail domain name ALL - SYS 96+2 (delimiter ) charac-
ter 
ASCII sequence only 11
1492 Paper  feeding Detection method of 13  
LG for single-size docu- 
ment ALL 0
 SYS 0: Disabled
1: Enabled 1
1494 General Limitation check method ALL 0 SYS 0:  Checked at every 
page printed
1:  Checked at every  job printed 2
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 217
2
1495 Mainte- nanceService call checking  
period setting ALL 6
 - 0:  No checking period 
specified (= Calls  
service technician  
immediately)
0:  10 minutes 
1:  30 minutes 
3:  1 hour  
4:  6 hours 
5:  12 hours 
6:  24 hours 
7:  48 hours 
8:  7 days 
9:  1 month 
10: 1 year 
11: 5 years 
12: Not limited (= Calls  service technician if  
such error has  
occurred in the past 
even once or more) 12
1496 General Operation setting for User  authentication/registration ALL 1
 SYS 0 :  Disables operation 
setting for User  
authentication/regis- 
tration
1 :  Enables operation  setting for User  
authentication/regis-
tration 1
1497 Network e-Filing Access Mode (for  Client) ALL 0
 SYS 0: Mode 1
1: Mode 2
2: Mode 3 1
1498 FAX Inbound FAX function (Forwarding by TSI) 1
 SYS 0: OFF
(Function disabled)
1: ON
(Function enabled) 1
1530-0 Counter Number of  output pages1-UP / 
Duplex  
printingPPC 0
 SYS Counts the number of  
output pages. 4
1530-1 2-UP /  Duplex  
printingPPC 0
 SYS Counts the number of 
output pages using  
[2IN1] or [MAGAZINE  
SORT]. 4
1530-2 2-UP / Simplex  
printingPPC 0
 SYS Counts the number of 
sheets using [2IN1] or 
[MAGAZINE SORT]. 4
1530-3 4-UP /  Duplex  
printingPPC 0
 SYS Counts the number of 
output pages using 
[4IN1]. 4
1530-4 4-UP / Simplex  
printingPPC 0
 SYS Counts the number of 
sheets using [4IN1]. 4
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 218
1533-0 Counter Number of 
output pages  
of the printer  
or BOX1-UP /
Duplex  
printing
PRT 0
 SYS Counts the number of 
output pages. 4
1533-1 2-UP / Duplex  
printingPRT 0
 SYS Counts the number of 
output pages using  
[2IN1] or [MAGAZINE  
SORT]. 
* When printing is performed using a  
Windows driver, the  
1-UP image will be 
output. 4
1535 Counter Number of output pages of  the FAX printing 
(1-UP / Duplex printing) FAX 0
 SYS Counts the number of 
output pages in the 
default settings. 1
1660 Wireless  LANWireless LAN driver  
Radio ON/OFF setting ALL 1
 - 1: OFF   2: ON 12
1661 Wireless  LANWireless LAN driver  
SSID ALL - - Maximum 32 letters 12
1662 Wireless  LANWireless LAN driver  
Network type ALL 1
 - 1: Infrared wireless LAN
2: Ad-hoc network 12
1663 Wireless  LANWireless LAN driver 
Security ALL 4
 - 1: 802.1x   2: WPA-PSK
3: WEP     4: NONE
5: WPA 6: WPA2 
7: WPA2PSK 12
1664 Wireless  LANWireless LAN driver  
Encryption system ALL 1
 - 1: TKIP  2: AES
3: Dynamic WEP 12
1665 Wireless  LANWireless LAN driver  
Transmission output power ALL 1
 - 1: 100% 2: 50%
3: 25% 4: 12.5% 
5: min 12
1666 Wireless  LANWireless LAN driver  
Transmission rate ALL 1
 - 1: Auto 2: Manual 12
1667 Wireless  LANWireless LAN driver  
Transmission rate value ALL 1
 - 1: 1 2: 2
3: 5.5 4: 11 
5: 6 6: 9 
7: 12 8: 18 
9: 24 
10: 36 
11: 48
12: 54 12
1668 Wireless  LANWireless LAN driver  
Operation channel ALL 1
 - 1: Auto 2: Manual 12
1669 Wireless  LANWireless LAN driver  
Operation channel value ALL 1
 - 12
1670 Wireless  LANWireless LAN driver  
WEP bit number ALL 1
 - 1: 64 2: 128
3: 152 12
1671 Wireless  LANWireless LAN driver 
WEP key entry system ALL 2
 - 1: Hex 2: ASCII 12
1672 Wireless  LANWireless LAN driver  
WEP key value ALL - - Maximum 32 letters 12
1673 Wireless  LANWireless LAN driver 
WPA-PSK passphrase ALL - - Maximum 64 letters 12
1674 Wireless  LANWireless LAN driver  
Sleep mode setting ALL 1
 - 1: Off 2: Max
3: Normal 12
1675 Wireless  LANWireless LAN driver 
Slot-time limitation ALL 1
 - 1: Long 2: Short 12
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 219
2
1676 Wireless  LANWireless LAN driver  
Number of times of soft- 
ware retry ALL 5
 - 12
1677 Wireless  LANWireless LAN driver  
Preamble ALL 1
 - 1: Long 2: Longshort 12
1678 Wireless  LANWireless LAN driver
Operation mode ALL 1
 - 1: All 2: 11b
3: 11g 12
1679 Wireless  LANWireless LAN supplicant 
Wireless LAN setting ALL 1
 - This setting is whether 
the wireless LAN con- 
nection is enabled or  
disabled. 
1: Unset 2: Enabled 
3: Disabled 12
1680 Wireless  LANWireless LAN supplicant 
Path name for configura- 
tion file ALL - - Maximum 255 letters 12
1681 Wireless  LANWireless LAN supplicant 
Path name for client certifi-
cate ALL - - This should be the path 
name in full where the 
client certificate is  
located. 
(Maximum 255 letters) 12
1682 Wireless  LANWireless LAN supplicant 
Path name for secret key  
of client certificate ALL - - This should be the path 
name in full where the  
client certificate is  
located. 
(Maximum 255 letters) 12
1684 Wireless  LANWireless LAN supplicant
Path name for CA self-cer- 
tificate ALL - - This should be the path 
name in full where the 
CA self-certificate is  
located.
(Maximum 255 letters) 12
1685 Wireless  LANWireless LAN supplicant 
EAP user name ALL - - This should be the user 
name when the EAP- 
TLS is used. 12
1686 Wireless  LANWireless LAN supplicant 
EAP user name ALL - - This should be the user 
name when the PEAP  
is used. 12
1688 Wireless  LANWireless LAN supplicant 
Log file output ALL - - This should be the path 
name to which the log 
file is output. 
(Maximum 255 letters) 12
1689 Wireless  LANWireless LAN supplicant 
Authentication interval ALL 30
 - This should be the time-
out interval between 
EAP responses.  
30: 30 seconds 12
1690 Wireless  LANWireless LAN supplicant 
Holding interval ALL 60
 - The EAP authentica-
tion will start after hav- 
ing been waited in this  
period when an EAP  
failure was received.
60: 60 seconds 12
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
06/01 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 220
1691 Wireless 
LANWireless LAN supplicant 
EAPOL-Start 
Number of times of packet  
retry ALL 3
 - When an EAPOL-Start 
packet has been sent  
and the request ID can- 
not be received, this 
EAPOL-Start packet will  
be re-sent for the num- 
ber of times set in this 
code.  
3: 3 times 12
1692 Wireless  LANWireless LAN supplicant 
Session resume ALL 2
 - This setting is whether 
the pre-master key 
should be updated or  
not upon a TLS re- 
negotiation.
1:  Session is resumed 
2:  Session is not 
resumed 12
1693 Wireless  LANWireless LAN supplicant 
MAC Frame size ALL 1398
 - This is a MAC frame 
size used in the wire- 
less LAN connection.  
The data is fragmented 
into this size. 
1398: 1398 bytes 12
1696 Wireless  LANWireless LAN supplicant 
Device file setting for  
obtaining random number ALL /dev/
urandom - This should be the 
device file name which 
can obtain a seed to ini- 
tialize the WEP PRNG  
for xsupplicant. 
(Maximum 255 letters) 12
1697 Wireless  LANWireless LAN supplicant 
CRL directory designation ALL - - This should be the path 
name of the directory in  
full where the CRL file  
is located.
(Maximum 255 letters) 12
1699 Wireless  LANWireless LAN supplicant 
EAP authentication type ALL 1
 - This setting is for the 
EAP authentication  
type which xsupplicant 
can authenticate. 
1: EAP-TLS 2: PEAP 
3: EAP-TLS and PEAP 12
1700 Wireless  LANWireless LAN supplicant
CN name ALL - - This should be an 
authentication server  
name (basically a  
domain name in full).
(Maximum 255 letters) 12
1701 Wireless  LANWireless LAN supplicant 
CN name check ALL 1
 - 1: NO 2: YES 12
1702 Wireless  LANWireless LAN supplicant 
Debugging level ALL 0
 - 0-7: Setting of log file 
output level 12
1703 Wireless  LANWireless LAN supplicant 
Ethereal log file output ALL 1
 - This setting is whether 
the Ethereal log file is  
output or not. 
1: NO 2: YES 12
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
06/01 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 221
2
1704 Wireless  LANWireless LAN supplicant 
Update interval of PTK  
(Pairwise Transient Key) ALL 0
 - The update interval of a 
secret key across AP 
(Access Point) and STA  
(Station) can be set. 
This interval is for  
updating the secret key  
from STA.
0: Not updated 
1-720: 1-720 minutes of  
interval 12
1705 Wireless  LANWireless LAN supplicant
Strict packet check ALL 1
 - The Ack bit and request 
bit of EAPOL-Key is  
checked. 
1:  Not checked
2:  Checked 12
1706 Wireless  LANWireless LAN supplicant 
Priority change at 4-way  
handshake ALL 1
 - A higher priority is given 
to the xsupplicant task 
when a 4-way hand- 
shake is started. 
1:  Priority not changed 
2:  Priority changed 12
1707 Wireless  LANWireless LAN supplicant 
Security level ALL 1
 - The encryption capabil-
ity output in TLS clien-
tHello message can be  
selected. 
1:  LOW 2: MIDDLE 
3:  HIGH 12
1708 User  interface Selectable security level  
(EAP-TLS) ALL 1
 - These are the security 
level which can be  
selected from the user 
interface. This setting is  
not applied in case of  
PEAP. (LOW and 
MIDDLE is manda- 
tory for PEAP) 
1:  LOW + MIDDLE + 
HIGH
2:  MIDDLE + HIGH
3:  HIGH 12
1709 Blue- toothBluetooth 
Installation status of option ALL 0
 SYS 0:  Not installed
1:  Installed 1
1710 Blue- toothBluetooth 
ON/OFF setting ALL 1
 SYS 0:  OFF
1:  ON 1
1711 Blue- toothBluetooth 
Device name ALL MFP SYS Maximum 32 letters 11
1712 Blue- toothBluetooth
Discovery ALL 1
 SYS 0:  Not allowed
1:  Allowed 1
1713 Blue- toothBluetooth 
Security ALL 1
 SYS 0:  Security function 
OFF
1:  Security function 
ON 1
1714 Blue- toothBluetooth 
PIN ALL 0000 SYS Maximum 8 digits 
(8-digit sequence)  
This setting is valid only 
when the bluetooth  
security function is ON. 11
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 222
1715 Blue-
toothBluetooth 
Data encryption ALL 1
 SYS 0:  Not encrypted
1:  Encrypted 
This setting is valid only  
when the bluetooth 
security function is ON. 1
1716 Blue- toothBluetooth 
HCRP reception time-out  
period ALL 6
 SYS Setting value ~ 0.5 sec. 1
1717 Blue- toothBluetooth 
HCRP transmission time- 
out period ALL 6
 SYS Setting value ~ 0.5 sec. 1
1720 Network IP address range for IP fil- ter  
(Minimum area 1) ALL - - IP filter minimum area 1
000.000.000.000-
255.255.255.255 
(Default value:  
000.000.000.000) 12
1721 Network IP address range for IP fil- ter  
(Maximum area 1) ALL - - IP filter maximum area 
1
000.000.000.000- 
255.255.255.255
(Default value:  
000.000.000.000) 12
1722 Network IP address range for IP fil- ter I 
(Minimum area 2) ALL - - IP filter minimum area 2
000.000.000.000-
255.255.255.255
(Default value:  
000.000.000.000) 12
1723 Network IP address range for IP fil- ter  
(Maximum area 2) ALL - - IP filter maximum area 
2 
000.000.000.000- 
255.255.255.255 
(Default value:  
000.000.000.000) 12
1724 Network IP address range for IP fil- ter 
(Minimum area 3) ALL - - IP filter minimum area 3
000.000.000.000-
255.255.255.255 
(Default value:  
000.000.000.000) 12
1725 Network IP address range for IP fil- ter  
(Maximum area 3) ALL - - IP filter maximum area 
3
000.000.000.000- 
255.255.255.255 
(Default value: 
000.000.000.000) 12
1726 Network IP address range for IP fil- ter  
(Minimum area 4) ALL - - IP filter minimum area 4
000.000.000.000-
255.255.255.255
(Default value:  
000.000.000.000) 12
1727 Network IP address range for IP fil- ter  
(Maximum area 4) ALL - - IP filter maximum area 
4
000.000.000.000- 
255.255.255.255 
(Default value: 
000.000.000.000) 12
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 223
2
1728 Network IP address range for IP fil- ter 
(Minimum area 5) ALL - - IP filter minimum area 5
000.000.000.000-
255.255.255.255 
(Default value: 
000.000.000.000) 12
1729 Network IP address range for IP fil- ter  
(Maximum area 5) ALL - - IP filter maximum area 
5 
000.000.000.000-
255.255.255.255 
(Default value:  
000.000.000.000) 12
1730 Network IP address range for IP fil- ter  
(Minimum area 6) ALL - - IP filter minimum area 6
000.000.000.000-
255.255.255.255 
(Default value:  
000.000.000.000) 12
1731 Network IP address range for IP fil- ter  
(Maximum area 6) ALL - - IP filter maximum area 
6
000.000.000.000-
255.255.255.255 
(Default value:  
000.000.000.000) 12
1732 Network IP address range for IP fil- ter 
(Minimum area 7) ALL - - IP filter minimum area 7
000.000.000.000-
255.255.255.255 
(Default value:  
000.000.000.000) 12
1733 Network IP address range for IP fil- ter  
(Maximum area 7) ALL - - IP filter maximum area 
7
000.000.000.000- 
255.255.255.255 
(Default value:  
000.000.000.000) 12
1734 Network IP address range for IP fil- ter  
(Minimum area 8) ALL - - IP filter minimum area 8
000.000.000.000- 
255.255.255.255 
(Default value:  
000.000.000.000) 12
1735 Network IP address range for IP fil- ter 
(Maximum area 8) ALL - - IP filter maximum area 
8
000.000.000.000- 
255.255.255.255
(Default value:  
000.000.000.000) 12
1736 Network IP address range for IP fil- ter  
(Minimum area 9) ALL - - IP filter minimum area 9
000.000.000.000-
255.255.255.255 
(Default value:  
000.000.000.000) 12
1737 Network IP address range for IP fil- ter  
(Maximum area 9) ALL - - IP filter maximum area 
9
000.000.000.000- 
255.255.255.255 
(Default value:  
000.000.000.000) 12
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 224
1738 Network IP address range for IP fil-
ter  
(Minimum area 10) ALL - - IP filter minimum area 
10
000.000.000.000- 
255.255.255.255
(Default value:  
000.000.000.000) 12
1739 Network IP address range for IP fil- ter  
(Maximum area 10) ALL - - IP filter maximum area 
10 
000.000.000.000- 
255.255.255.255 
(Default value: 
000.000.000.000) 12
1740 Network SSL setting HTTP server OFF/ON set- 
ting ALL 2
 - 1:  Enabled
2:  Disabled 12
1741 Network SSL setting HTTP server port number ALL 10443
 - SSL HTTP server port 
number 12
1742 Network SSL setting IPP server OFF/ON setting ALL 2
 - 1:  Enabled
2:  Disabled 12
1743 Network SSL setting IPP server port number ALL 443
 - SSL IPP server port 
number 12
1744 Network SSL setting SSL ftp server OFF/ON ALL 2
 - OFF/ON
1:  Valid
2:  Invalid 12
1745 Network SSL setting SSL ftp server Port ALL 990
 - Port number to FTP 
Server 12
1746 Network SSL setting SSL LDAP Client OFF/ON ALL 2
 - OFF/ON
1:  Valid 
2:  Invalid 12
1747 Network SSL setting  SSL LDAP Client Port ALL 636
 - Port number to LDAP 
Server 12
1748 Network SSL setting SSL POP3 Client OFF/ON ALL 2
 - OFF/ON
1:  Valid 
2:  Invalid 12
1749 Network SSL setting SSL POP3 Client Port ALL 995
 - Port number to POP3 
Server 12
1750 Network SSL setting SSL SMTP Client OFF/ON ALL 2
 - 2:  Invalid
3:  SMTP with TLS 
(STARTTLS)
4:  SMTPS (SMTP  OverSSL) 12
1751 Network SSL setting SSL SMTP Client Port ALL 465
 - Port number to SMTP 
Server 12
1755 Network Enabling servers IP  address acquired by DHCP ALL 2
 - Domain Name Server 
option (6) 
1:  Enabled 
2: Disabled 
* This value is used 
only when DHCP is  
enabled. 12
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11