Canon I Sensys Mf8550cdn User Guide

							Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back on.
LINKS
Remote  UI Screens
Setting Menu List
>à>ã>Ý>Ì>Û>Ì>â>ã>â
 
						

							0ALJ-0AS
Registering Address Book from Remote UI (MF8580Cdw / MF8550Cdn /
MF8540Cdn / MF8280Cw Only)
You  can register  or edit the  Address Book of the  machine by using the  computer.
NOTE
You  can change the  settings only when you have logged on  in System Manager  Mode.
Start  the Remote UI.  Starting Remote UI
Click [Address Book].
NOTE:
If the enter PIN page is  displayed
The Address Book is  protected  by a PIN. Enter the  [PIN] and  click [OK].
Click [Coded  Dial].
You  can also  register  destinations in Favorites. In this case, click [Favorites] instead of [Coded Dial]. Registering in the
Address Book (MF8580Cdw  / MF8550Cdn / MF8540Cdn / MF8280Cw Only)
Click the text link under [Number], [Type],  or [Name] for an item  named  Not  Registered.
NOTE:
You  can edit a registered item  by clicking  the  corresponding text link  under [Number], [Type] or [Name].
1
2
3
4
>à>ã>Þ>Ì>Û>Ì>â>ã>â
 
						

							You  can delete  a registered item  by clicking  the  corresponding [Delete] button.
Select [Destination  Type to Register] and  click [OK].
Specify  required settings  and  click [OK].
LINKS
Remote  UI Screens
Saving/Loading Address Book (MF8580Cdw  / MF8550Cdn / MF8540Cdn / MF8280Cw Only)
Address Book List (MF8580Cdw  / MF8550Cdn / MF8540Cdn / MF8280Cw Only)
5
6
>à>ã>ß>Ì>Û>Ì>â>ã>â
 
						

							0ALJ-0AU
Setting Menu List
There  are  various settings in this machine. You  can adjust each of the  settings in detail. Access these settings by pressing .
TIPS
You  can print the  setting menu in list  form to  check  the  current  settings:
User Data  List/System  Manager  Data  List
>à>ã>à>Ì>Û>Ì>â>ã>â
 
						

							0ALJ-0AW
Network Settings
All  the  settings about  the  network are  listed with short descriptions. Default  settings are  marked with a dagger
().
NOTE
Asterisks ( )
Settings marked with " " are  only available for  the  MF8580Cdw  / MF8280Cw.
Settings marked with " " are  only available for  the  MF8580Cdw  / MF8550Cdn / MF8540Cdn.
Select Wired/Wireless LAN
Wireless LAN Settings
TCP/IP Settings
SNMP  Settings
Dedicated Port Settings
Waiting Time for Connection at Startup
Ethernet Driver  Settings
IEEE 802.1X Settings
Initialize  Network Settings
When  switching the  machine from Wireless LAN to  Wired LAN, you need to  specify  the  setting. Conversely, when switching the  mach ine
from Wired LAN to  Wireless LAN, you do not  need to  specify  this setting (You  can switch  using the  following  ).
Selecting  Wired  LAN or Wireless LAN (MF8580Cdw  / MF8280Cw Only)
Wired LAN
Wireless LAN
Specify settings for  connecting the  machine to  a wireless LAN. You  can also  view the  current  settings or specify  the  setting for  saving
power consumption.
WPS  Push Button Mode
Select to  automatically configure a wireless connection by using the  button on  a WPS wireless router. Setting Up Connection
Using  WPS Push Button  Mode
WPS  PIN Code Mode
Select to  configure a wireless connection by entering  a PIN  code for  a WPS wireless router. Setting Up Connection Using  WPS
PIN Code  Mode
SSID  Settings
Select to  configure a wireless connection by specifying  information  including an  SSID  or a network key  by inputting  manually from
the  operation panel.
Select Access  Point
Wireless LAN routers that  can access the  machine are  automatically located, so you can select from the  list. You  must manually
enter a network key, such as a WEP key  or a PSK. Setting Up Connection by Selecting  a Wireless Router
*
*1
*2
Select  Wired/Wireless LAN *1
Wireless  LAN Settings *1
>à>ã>á>Ì>Û>Ì>â>ã>â
 
						

							Enter  Manually
Select to  configure a wireless connection by manually entering  an  SSID. By using this method, you can specify  authentication and
encryption settings in detail. Setting Up Connection by Specifying Detailed Settings
Security  Settings None
WEPOpen  System
Select WEP Key: 1/2/3/4
Edit  WEP Key
Shared  Key Select WEP Key: 1/2/3/4
Edit  WEP Key
WPA/WPA2-PSK Auto
AES-CCMP
Power Save Mode 
Select whether  or not  the  machine enters  Power Save  Mode based on  signals emitted  from the  wireless router.
Off
On
Wireless LAN Information
Select to  view the  current  wireless LAN settings.  Viewing Network Settings
MAC Address
Wireless LAN Status
Latest Error Information
Channel
SSID  Settings
Security Settings
Power Save  Mode
Specify settings for  using the  machine in a TCP/IP  network, such as IP  address settings.
IPv4 Settings
Specify settings for  using the  machine in an  IPv4  network.
IP Address Settings
Configure the  IP  address, which is  used for  identifying devices,  such as computers and  printers, on  a TCP/IP  network. Setting
IPv4  Address
Auto  Acquire
Select Protocol Off
DHCP
BOOTP
RARP
Auto  IP Off
On
Manually AcquireIP  Address: 0.0.0.0
Subnet  Mask:  0.0.0.0
       Read the  displayed message    Select  or  
TCP/IP Settings
>à>ã>â>Ì>Û>Ì>â>ã>â
 
						

							Gateway Address: 0.0.0.0
Check Settings Auto  Acquire
IP  Address
Subnet  Mask
Gateway Address
PING  Command
Select to  check  that  the  machine is  connected to  a computer  over a network. Testing the Network Connection
DNS Settings
Specify settings for  Domain  Name System (DNS),  which provides a host  name for  IP  address resolutions.  Configuring  DNS
DNS  Server Settings Primary DNS Server:  0.0.0.0
Secondary DNS Server:  0.0.0.0
DNS  Host Name/Domain Name  Settings Host Name
Domain  Name
DNS  Dynamic  Update Settings Off
OnDNS Dynamic Update Interval0  to  24
 to  48 (hr.)
mDNS  Settings
Specify settings for  using DNS functions without DNS servers. Configuring  DNS
Off
On
mDNS  Name
DHCP Option Settings
Select whether  to  acquire the  host  name and  whether  to  use the  dynamic update  function via  the  DHCP options when DHCP is
enabled.  Configuring  DNS
Acquire Host Name Off
On
DNS  Dynamic  UpdateOff
On
IPv6 Settings
Specify settings for  using the  machine in an  IPv6  network.
Use IPv6
Enable or disable IPv6  in the  machine. You  can also  view the  current  settings.  Setting IPv6  Addresses
Off
On
Check Settings
Stateless  Address Settings
Enable or disable stateless addresses.Setting IPv6  Addresses
Off
On
Check Settings
Use DHCPv6
Enable or disable the  stateful address that  is  acquired via  DHCPv6. Setting IPv6  Addresses
Off
On
Check Settings Stateful  Address
>à>ã>ã>Ì>Û>Ì>â>ã>â
 
						

							Prefix Length
DNS Settings
Specify settings for  Domain  Name System (DNS),  which provides a host  name for  IP  address resolutions.  Configuring  DNS
DNS  Host Name/Domain Name  Settings Use  IPv4  Host/DomainOffHost Name
Domain  Name
On
DNS  Dynamic  Update Settings Off
OnRegister Manual AddressOff
On
Register Stateful  Address Off
On
Register Stateless Address Off
On
DNS Dynamic Update Interval 0  to  24
 to  48 (hr.)
mDNS  Settings
Specify settings for  using DNS functions without DNS servers. Configuring  DNS
Off
On
Use  Same  mDNS  Name as IPv4 OffmDNS  Name
On
WINS  Settings
Specify settings for  Windows  Internet  Name Service (WINS), which provides a NetBIOS  name for  IP  address resolutions  in a mixed
network environment of NetBIOS  and  TCP/IP. Configuring  WINS
WINS  Resolution Off
OnWINS Server  Address: 0.0.0.0
Scope ID
LPD Print Settings
Enable or disable LPD, a printing protocol that  can be used on  any hardware platform  or operating  system. Configuring  Printing
Protocols and  WSD Functions
Off
On
RAW Print Settings
Enable or disable RAW, a Windows  specific printing protocol. Configuring  Printing Protocols and  WSD Functions
Off
On
WSD Settings
Enable or disable automatic browsing and  acquiring information  for  the  printer or scanner  by using the  WSD protocol that  is  ava ilable
on  Windows  Vista/7/8/Server 2008/Server  2012. Configuring  Printing Protocols and  WSD Functions
WSD Print Settings Use  WSD PrintOff
>à>ã>ä>Ì>Û>Ì>â>ã>â
 
						

							OnUse  WSD BrowsingOff
On
WSD Scan SettingsUse  WSD ScanOff
On
Use  Computer Scan Off
On
Use Multicast Discovery Off
On
Use HTTP
Enable or disable HTTP, which is  required for  communications  with a computer, such as when using the  Remote  UI, WSD printing,  or
printing with Google  Cloud Print.  Disabling HTTP  Communication
Off
On
Port  Number Settings
Change  port numbers  for  protocols according to  the  network environment. Changing Port Numbers
LPD 1  to  515
 to  65535
RAW 1  to  9100
 to  65535
HTTP 1  to  80
 to  65535
POP3 1  to  110
 to  65535
SMTP 1  to  25
 to  65535
SNMP 1  to  161
 to  65535
WSD Search 1  to  3702
 to  65535
Multicast Discovery 1  to  427
 to  65535
MTU  Size
Select the  maximum  size of packets  the  machine sends or receives.  Changing the Maximum Transmission  Unit
1300
1400
1500
Specify the  settings for  monitoring and  controlling the  machine from a computer  running  SNMP-compatible  software. Monitoring  and
Controlling the Machine  with SNMP
SNMPv1 Settings
Enable or disable SNMPv1.  When  enabling  SNMPv1,  specify  a community name and  access privileges to  Management Information
Base(MIB) objects.
Off
*2
*2
SNMP  Settings
>à>ã>å>Ì>Û>Ì>â>ã>â
 
						

							On
SNMPv3 Settings
Enable or disable SNMPv3.  Use  the  Remote  UI to  specify  detailed settings that  are  applied when SNMPv3 is  enabled.Off
On
Acquire Printer Management Information  from Host
Enable or disable the  monitoring of printer management  information  from a networked computer  running  SNMP-compatible  software.Off
On
Enable or disable the  dedicated  port. The dedicated  port is  used when printing,  faxing, or scanning uses MF Toolbox  and  when br owsing
or specifying  the  machine settings over the  network.
Off
On
         Select  or
 Restart  the  machine
         Select  or Restart  the  machine
         Select  or  Restart  the  machine
Dedicated Port Settings
       Select  or   Restart
the  machine
>à>ä>Ü>Ì>Û>Ì>â>ã>â