Canon printer MAXIFY MB5120 User Manual

							2500Cause
Cause of following may have occurred failure of automatic print head alignment.
						

							2700Cause
Possible causes include the following.
						

							2802Cause
No document in ADF.
WhattoDo Tap  OK on the touch screen to resolve the error and operate again after loading documents.
1253 
						

							2803Cause
Document is too long or is jammed in ADF.
WhattoDo
Tap  OK on the touch screen. Then make sure the document you are loading meets the printer's
requirements before redoing the operation.
If the document is jammed, remove the jammed document following the procedure below.
Important

						

							5.
Close document feeder cover and turn on printer.
When rescanning the document after clearing the error, rescan it from the first page.
If you cannot remove the document or the document tears inside the printer, or if the document jam error continues after removing the document, contact your nearest Canon service center to request a
repair.
Note

						

							2805Cause
Document cover is open.
WhattoDo Close the document cover and tap  OK on the touch screen of the printer.
1256 
						

							3401Cause
Reserve copy is canceled.
WhattoDo Tap  OK on the touch screen of the printer.
1257 
						

							3402Cause
Printer could not make copies because its memory is full.
WhattoDoTap  OK on the touch screen of the printer.
Wait for a while and retry copying.
1258 
						

							3403Cause
Printer could not make copies because its memory is full.
WhattoDoTap  OK on the touch screen of the printer.
Wait for a while and retry copying.
1259 
						

							3404Cause
Document is remained in ADF.
WhattoDo
Wait for a while. Copying will start.
1260