Canon printer MAXIFY MB5120 User Manual

							Afterward, a confirmation screen is displayed for printing a nozzle check pattern.6.
Load a sheet of A4 or Letter-sized plain paper in the cassette.
Important

						

							DeepPrintHeadCleaningIf standard print head cleaning does not improve print quality, try deep print head cleaning. However,because deep print head cleaning consumes more ink, this operation is advisable only when necessary.
Note

						

							6.Load a sheet of A4 or Letter-sized plain paper in the cassette.
Important

						

							AligningthePrintHeadIf printed images seem distorted, as when parallel lines are not printed parallel, align the print head.
Note

						

							7.Tap Yes.
The print head alignment sheet is printed, and the print head is aligned automatically. This process takes 3–4 minutes.
Note

						

							AligningthePrintHeadManuallyTry aligning the print head manually after automatic alignment if printing results are not as expected, as
when parallel lines are not printed parallel.
Note

						

							6.Pull out the output tray extension and open the paper output support.7.
Tap Yes.
The print head alignment pattern is printed.
8.
Confirm that the pattern was printed correctly, and if so, tap  Yes after " Didthepatterns
printcorrectly? " is displayed.
9.
Check the message and tap  Next.
The input screen for head position alignment values is displayed.
10.
Examine the first patterns and tap  A. In column A, find the pattern in which vertical streaks
are least noticeable, and then tap the number of that pattern.
217 
						

							Note
						

							D: Noticeable horizontal streaks14.
Repeat these steps until you have finished entering pattern numbers for columns O to T,
and then tap  OK.
For column P, choose the pattern in which vertical streaks are least noticeable.
15.
Tap  OK when a message is displayed indicating that print head alignment is finished.
219 
						

							PerformingMaintenanceFunctionsfromYourComputer
(Windows)
CleaningthePrintHeads
AligningthePrintHeadPosition
PrintingaNozzleCheckPattern
220