Canon printer MAXIFY MB5120 User Manual

							PreviewIconShows the settings of the  Tiling/PosterPrinting dialog box.
You can check what the print result will look like.
ImageDivisions Select the number of divisions (vertical x horizontal).
As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allows you to create a
larger poster.
Print"Cut/Paste"inmargins Specifies whether to print the words "Cut" and "Paste" in the margins. These words serve as
guidelines for pasting together the pages into a poster. Check this check box to print the words.
Note

						

							MarginSpecifies the width of the stapling margin.
The specified width becomes the stapling margin from the center of the sheet.
PageBorder Prints a page border line around each document page.Check this check box to print the page border line.
PrintAreaSetupdialogbox When you perform duplex printing, the print area of the document becomes slightly narrower than usual.
Therefore when a document that has small margins is printed, the document may not fit on one page.
This dialog box allows you to set whether the page is to be reduced when printed so that the document
fits in one page.
Usenormal-sizeprinting Prints the document pages without reducing them. This is the default setting.
Usereducedprinting Slightly reduces each document page so that it fits on one sheet of paper during printing.
Select this setting when using automatic duplex printing to print a document with small margins.
SpecifyMargindialogbox This dialog box allows you to specify the margin width for the side to be stapled. If a document does not fit
on one page, the document is reduced when printed.
Margin Specifies the width of the stapling margin.
The width of the side specified by  StaplingSide becomes the stapling margin.
PrintOptionsdialogbox Makes changes to print data that is sent to the printer.
Depending on the type of printer driver you are using and the environment, this function may not be
available.
DisableICMrequiredfromtheapplicationsoftware Disables the ICM function required from the application software.
When an application software uses Windows ICM to print data, unexpected colors may be produced or the printing speed may decrease. If these problems occur, checking this check box may resolve
the problems.
Important

						

							Note
						

							Note
						

							PrintsemitransparentstampSets how the stamp is to be printed over the document.
Check the  Stamp check box to enable this.
Check this check box to print a semi-transparent stamp over the printed document page. Uncheck this check box to print the stamp over the document data. The printed data may be hidden
behind the stamp.
Note

						

							Important
						

							OrientationSpecifies the angle of rotation for the stamp. The angle can be set by entering the number of
degrees.
Negative values rotate the stamp clockwise.
Note

						

							IntensityAdjusts the intensity of the bitmap to be used as a background.
Moving the slider to the right increases the intensity, and moving the slider to the left decreases the
intensity. To print the background at the original bitmap intensity, move the slider to the rightmost
position.
Note

						

							MaintenancetabDescriptionThe  Maintenance  tab allows you to perform printer maintenance or change the settings of the printer.
Cleaning
Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels are sufficiently high.
DeepCleaning
Performs deep cleaning.
Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
Note

						

							PrintHeadAlignment
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
Align the print head immediately after installing the print head. When you click  PrintHeadAlignment , the 
StartPrintHeadAlignment dialog box is displayed.
NozzleCheck
Prints a nozzle check pattern.
Perform this function if printing becomes faint or a specific color fails to print. Print a nozzle check
pattern, and check whether the print head is working properly.
If the print result for a specific color is fainted, or if there are any unprinted sections, click  Cleaning to
clean the print head.
To display a list of items that you should check before printing the nozzle check pattern, click 
Initial
CheckItems .
PrintCheckPattern This function prints a pattern that allows you to check whether the any of the ink nozzles are
clogged.
Click  PrintCheckPattern . When the confirmation message is displayed, click  OK. The  Pattern
Check  dialog box is then displayed.
Left-sidebitmap(good) The print head nozzles are not clogged.
Right-sidebitmap(bad) The print head nozzles may be clogged.
Exit Closes the  PatternCheck  dialog box, and returns to the  Maintenance tab.
Cleaning Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or if a specific color fails to print, even though
all ink levels are sufficiently high.
PowerOff
Turns off the printer from the printer driver. Perform this function to turn off the printer when you cannot press the ON button (POWER button) on
the printer because the printer is out of your reach.
You must press the ON button (POWER button) on the printer to turn the printer on again after clicking
this button. When you use this function, you will not be able to turn the printer on from the printer driver.
QuietSettings
Opens the 
QuietSettings dialog box .
QuietSettings  dialog box allows you to specify a setting that reduces the operating noise of the printer.
560