Canon printer MAXIFY MB5120 User Manual

							WebservicesetupSelect this setting item from  Webservicesetup on Setup .
Important

						

							SysteminformationSelect this setting item from  Systeminformation on Setup .
						

							ECOsettingsSelect this setting item from HOME screen.
This setting allows you to use following functions.
						

							A.Tap to select two-sided copying as a default.B.
Tap to select duplex printing PDF files saved on a USB flash drive as a default.
C.
Tap to select two-sided printing of sent/received faxes, reports, or lists as a default.
D.
Tap to specify the print settings.
Note

						

							SpecifyingTimeandDaytoTurnon/offPrinterAutomaticallyFollow the procedure below to use power saving function.1.
Make sure printer is turned on.
2.
Flick HOME screen and tap   ECOsettings .
Using the Operation Panel
3.
Tap Powercontrol .
4.
Tap Enablescheduling .
5.
Check message and tap  Next.
6.
Specify settings as necessary.

						

							4.
Tap numbers to specify time to turn on printer.
You can specify the hour from 0 to 24 and specify the minute in increments of 10 minutes.
5.
Tap  OK to confirm time to turn on printer.
After confirming the time to turn the printer on, the screen to specify the day is displayed. Tap the day, tap  Enable or Disable , and then tap  OK. The setting is valid on the day(s) you
select  Enable  for.

						

							5.
Tap numbers to specify time to turn off printer.
You can specify the hour from 0 to 24 and specify the minute in increments of 10 minutes.
6.
Tap  OK to confirm time to turn off printer.
After confirming the time to turn the printer off, the screen to specify the day is displayed.
Tap the day, tap  Enable or Disable , and then tap  OK. The setting is valid on the day(s) you
select  Enable  for.
328 
						

							QuietsettingSelect this setting item from HOME screen.
Enables this function on the printer if you want to reduce the operating noise, such as when printing at night.
In addition, you can specify the time range to reduce the operating noise.
Important

						

							1.
Tap numbers to specify starting time.
You can specify the hour from 0 to 24.
2.
Tap to confirm starting time.
After specifying the starting time, specify the ending time following the same procedure.
B.
Tap to confirm the time to start and to end.
You can reduce the operating noise during the specified time.
The confirmation screen is displayed and the 
 icon appears as the  Quietsetting menu icon.
Important