Canon printer MAXIFY MB5120 User Manual

							ConnectingTelephoneLineThe connection method differs depending on your telephone line.
						

							Important

						

							E.Telephone or answering machineF.
WAN (Wide Area Network) port
G.
LAN (Local Area Network) port
H.
TEL port
I.
LINE port
* Port configurations and names may vary depending on the product.
Note

						

							SettingTelephoneLineTypeBefore using your printer, make sure you set the correct telephone line type for your telephone line. If you
are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections,
contact the telephone company or service provider to confirm your line type.
Important

						

							RotarypulseSelect when your telephone line type is pulse dialing.
Touchtone Select when your telephone line type is tone dialing.
SettingtheTelephoneLineTypeManuallyinChina
This section describes the procedure to set the telephone line type manually in China.
1.
Make sure that printer is turned on.
2.
Flick HOME screen, and then tap   Setup .
Using the Operation Panel
3.
Tap  Devicesettings .
4.
Tap FAXsettings .
5.
Tap FAXusersettings .
6.
Tap Telephonelineautoselection .
The current telephone line type is displayed.
7.
Check current telephone line type, and then tap  OK.
Note

						

							RotarypulseSelect when your telephone line type is pulse dialing.
Touchtone Select when your telephone line type is tone dialing.
926 
						

							SettingReceiveModeSet the receiving operation (receiving mode).
For details on how to set the receive mode:
Setting Receive Mode
You can select the appropriate mode.
For details on the selectable receive mode:
About Receive Mode
For details on the advanced settings of the receive mode:
Advanced Settings of Receive Mode
Note

						

							Advanced Settings of Receive Mode
						

							Specify the number of time and tap OK.