Home > Canon > Printer > Canon printer MAXIFY MB5120 User Manual

Canon printer MAXIFY MB5120 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer MAXIFY MB5120 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1356
    							PaperSizeSpecifies the  Width and the  Height of the custom paper. Measurement is shown according to the
    units specified in  Units.
    PrinterMediaInformationdialogbox
    This dialog box allows you to check the printer settings and apply the checked settings to the printer
    driver.
    PaperSource Check the setting or select a new paper source.
    MediaType Displays the  MediaType that is currently set on the printer.
    To apply the displayed setting to the printer driver, click  Set.
    PageSize Displays the  PageSize that is currently set on the printer.
    To apply the displayed setting to the printer driver, click  Set.
    RelatedTopics
    Printing with Easy Setup
    Setting a Page Size and Orientation
    Setting the Number of Copies and Printing Order
    Duplex Printing
    Setting Up Envelope Printing
    Printing on Postcards
    Displaying the Print Results before Printing
    Setting Paper Dimensions (Custom Size)
    Printing a Color Document in Monochrome
    Specifying Color Correction
    Adjusting Color Balance
    Adjusting Color Balance Using Sample Patterns (Printer Driver)
    Adjusting Brightness
    Adjusting Intensity
    Adjusting Contrast
    Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
    Registering a Frequently Used Printing Profile
    541 
    						
    							MaintabDescriptionThe  Main  tab allows you to create a basic print setup in accordance with the media type. Unless special
    printing is required, normal printing can be performed just by setting the items on this tab.
    SettingsPreview The paper illustration shows how the original will be laid out on a sheet of paper.
    You can check an overall image of the layout.
    MediaType Selects a type of printing paper.Select a media type that matches the paper that is loaded in the printer. This ensures that printing is
    carried out properly for the specified paper.
    PaperSource Shows the source from which paper is supplied.
    Cassette Paper is always supplied from the cassette.
    PrintQuality Selects your desired printing quality.
    Select one of the following to set the print quality level that is appropriate for the purpose.
    Important
    
    						
    							Color/IntensitySelects color adjustment method.
    Auto Cyan , Magenta , Yellow , Brightness , Intensity , and Contrast , and so on are adjusted
    automatically.
    Manual Select when you set the individual settings such as  Cyan, Magenta , Yellow , Brightness ,
    Intensity , and Contrast , etc. and  ColorCorrection  method.
    Set... Select  Manual  for Color/Intensity  to enable this button.
    In the  ManualColorAdjustment  dialog box, you can adjust individual color settings such as
    Cyan , Magenta , Yellow , Brightness , Intensity , and Contrast  on the 
    ColorAdjustment tab, and
    select the  ColorCorrection  method on the 
    Matching tab.
    Note
    
    						
    							Cyan/Magenta/YellowAdjusts the strengths of  Cyan, Magenta , and Yellow .
    Moving the slider to the right makes a color stronger, and moving the slider to the left makes a color
    weaker.
    You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
    This adjustment changes the relative amount of ink of each color used, which alters the total color
    balance of the document. Use your application if you want to change the total color balance
    significantly. Use the printer driver only if you want to adjust the color balance slightly.
    Important
    
    						
    							Intensity/ContrastPrints a pattern that allows you to check the intensity/contrast balance.
    PrinterPaperSize Selects the paper size to be used for pattern printing.
    This setting is linked to  PrinterPaperSize on the PageSetup  tab.
    Note
    
    						
    							PageSetuptabDescriptionThe  PageSetup  tab allows you to determine how a document is to be arranged on the paper. Also, this tab
    allows you to set the number of copies and the order of printing. If the application which created the
    document has a similar function, set them with the application.
    SettingsPreview The paper illustration shows how the original will be laid out on a sheet of paper.You can check an overall image of the layout.
    PageSize Selects a page size.
    Ensure that you select the same page size as you selected within the application. If you select  Custom..., the 
    CustomPaperSize dialog box  opens and allows you to specify any
    vertical and horizontal dimensions for the paper size.
    Orientation Selects the printing orientation.
    If the application used to create your document has a similar function, select the same orientation that
    you selected in that application.
    Portrait Prints the document so that its top and bottom positions are unchanged relative to the paper feed
    direction. This is the default setting.
    Landscape Prints the document by rotating it 90 degrees relative to the paper feed direction.
    You can change the rotation direction by going to the  Maintenance tab, opening the  Custom
    Settings  dialog box, and then using  Rotate90degreesleftwhenorientationis[Landscape@
    check box.
    To rotate the document 90 degrees to the left when printing, select the  Rotate90degreesleft
    whenorientationis[Landscape@  check box.
    547 
    						
    							Rotate180degreesPrints the document by rotating it 180 degrees against the paper feed direction.
    The width of print area and the amount of extension that are configured in other application software will
    be reversed vertically and horizontally.
    PrinterPaperSize Selects the size of paper actually loaded into the printer.
    The default setting is  SameasPageSize to perform normal-sized printing.
    You can select a printer paper size when you select  Fit-to-Page, Scaled , PageLayout , Tiling/Poster ,
    or  Booklet  for PageLayout .
    If you select a paper size that is smaller than the  PageSize, the document size will be reduced. If you
    select a paper size that is larger, the document size will be enlarged.
    Also if you select  Custom..., the 
    CustomPaperSize dialog box  opens and allows you to specify any
    vertical and horizontal dimensions for the paper size.
    PageLayout Selects the size of the document you want to print and the type of printing.
    Normal-size This is the normal printing method. Select this when you do not specify any page layout.
    Automaticallyreducelargedocumentthattheprintercannotoutput If the printer cannot print the paper size of a document, the printer can automatically reducethe size when it prints the document.
    Check this check box to reduce the size when printing the document.
    Fit-to-Page This function enables you to automatically enlarge or reduce documents to fit to the paper size
    loaded in the printer without changing the paper size you specified in your application software.
    Scaled Documents can be enlarged or reduced to be printed.
    Specify the size in  PrinterPaperSize , or enter the scaling ratio in the  Scaling box.
    Scaling Specifies an enlargement or reduction ratio for the document you want to print.
    PageLayout Multiple pages of document can be printed on one sheet of paper.
    Specify... Opens the 
    PageLayoutPrinting dialog box .
    Click this button to set details on page layout printing.
    Tiling/Poster This function enables you to enlarge the image data and divide the enlarged data into several
    pages to be printed. You can also glue together these sheets of paper to create large printed
    matter, such as a poster. Specify... Opens the 
    Tiling/PosterPrinting dialog box .
    Click this button to set details on tiling/poster printing.
    Booklet The booklet printing function allows you to print data for a booklet. Data is printed on both sides of
    the paper. This type of printing ensures that pages can be collated properly, in page number order,
    when the printed sheets are folded and stapled at the center.
    548 
    						
    							Specify...Opens the 
    BookletPrinting dialog box .
    Click this button to set details on booklet printing.
    DuplexPrinting Selects whether to print the document automatically on both sides or one side of a sheet of paper.Check this check box to print the document on both sides.
    This function can be used only when  PlainPaper is selected for  MediaType and one of Normal-size ,
    Fit-to-Page , Scaled , or PageLayout  is selected.
    Automatic Selects whether duplex printing is to be performed automatically or manually.This check box will be enabled if  Booklet is selected from the  PageLayout list or the Duplex
    Printing  check box is checked.
    To perform duplex printing automatically, check this check box.
    To perform duplex printing manually, uncheck this check box.
    PrintAreaSetup... Opens the 
    PrintAreaSetup dialog box  in which you can configure the print area for automatic
    duplex printing.
    StaplingSide Selects the stapling margin position.The printer analyzes the  Orientation and PageLayout  settings, and automatically selects the best
    stapling margin position. Check  StaplingSide, and select from the list to change it.
    SpecifyMargin... Opens the 
    SpecifyMargin dialog box .
    You can specify the width of the margin.
    Copies Specifies the number of copies you want to print. You can specify a value from 1 to 999.
    Important
    
    						
    							PrintOptions...Opens the 
    PrintOptions dialog box .
    Changes detailed printer driver settings for print data that is sent from applications.
    Stamp/Background...(Stamp...) Opens the 
    Stamp/Background (Stamp) dialog box .
    The  Stamp  function allows you to print a stamp text or a bitmap over or behind document data. It also
    allows you to print date, time and user name. The  Background function allows you to print a light
    illustration behind the document data.
    Note
    
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer MAXIFY MB5120 User Manual