Home > Canon > Printer > Canon printer MAXIFY MB5120 User Manual

Canon printer MAXIFY MB5120 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer MAXIFY MB5120 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1356
    							MediumIt is recommended that you normally select this setting.
    High Select this when the photo is very grainy. This can affect the gradation and sharpness of the image.
    Important
    
    						
    							ColorAdjustmentButtonsThe Color Adjustment Buttons allow you to make fine corrections to the image brightness and color tones
    including adjustments to the image's overall brightness or contrast and adjustments to its highlight and
    shadow values (histogram) or balance (tone curve).
    Important
    
    						
    							(Histogram)
    A histogram allows you to see the data concentration at each brightness level of an image. You can specify the brightest level (highlight) and darkest level (shadow) within an image, cut the levels and expand the middle of the tonal range of the image.
    Adjusting Histogram
    (ToneCurveSettings)
    Adjust the brightness of an image by selecting the type of graph (tone curve) showing the balance of
    tone input and output. You can make fine adjustments to the brightness of a specific area.
    Adjusting Tone Curve
    (FinalReview)
    Make a final check of color adjustments. The final synthesized tone curve and the histogram derived
    from the subsequent image processing will be displayed. There are no settings to make in this screen.
    
    						
    							Enter SettingName  and click Add; the name appears in  ToneCurveSettingsList  or Threshold
    SettingsList . Click Save to save.
    To delete an item, select it in  ToneCurveSettingsList or ThresholdSettingsList  and click Delete.
    Click  Save to save the settings displayed in  ToneCurveSettingsList or ThresholdSettingsList .
    You can load and apply the saved tone curve/threshold settings to a preview image. To load the
    settings, select the saved item from the pull-down menu.
    Note
    
    						
    							PreferencesDialogBoxIn the  Preferences  dialog box, you can make advanced settings to ScanGear (scanner driver) functions via
    the  Scanner , Preview , Scan , and  ColorSettings  tabs.
    Click  Preferences...  in the ScanGear screen to open the  Preferences dialog box.
    ScannerTab
    Allows you to set the auto power settings, specify the folder in which to save images temporarily, and
    set the music file to play during or at the end of a scan.
    PreviewTab
    Allows you to select what to do with Preview when ScanGear is started, how to display cropping frames
    after previewing images, and the cropping size for thumbnails of scanned documents.
    ScanTab
    Allows you to select what to do with ScanGear after scanning image.
    ColorSettingsTab
    Allows you to select how to adjust color, and specify the monitor gamma value.
    836 
    						
    							ScannerTabOn the  Scanner  tab, you can specify the following settings.
    Important
    
    						
    							Important
    When connected to the network, depending on your model, the power does not turn off automatically even if  AutoPowerOff is set.
    Refer to "Function Support List by Model (Auto Power Off)" to check if your model supports the
    Auto Power Off function.
    QuietSettings The silent function allows you to reduce the operating noise of this machine. Use this when you wish toreduce the operating noise such as when scanning or printing at night.
    Click  Settings...  to set the quiet mode.
    Note
    
    						
    							SoundSettingsYou can set the machine to play music during/at the end of a scan.
    Select the  Playmusicduringscanning  or Playsoundwhenscanningiscompleted  checkbox, then
    click  Browse...  and specify a sound file.
    You can specify the following files.
    						
    							PreviewTabOn the  Preview  tab, you can specify the following settings.
    PreviewatStartofScanGear
    Select what to do with Preview when ScanGear (scanner driver) is started.
    Automaticallyexecutepreview ScanGear will automatically start previewing at startup.
    Displaysavedpreviewimage The previously previewed image will be displayed.
    The Color Adjustment Button settings, the Toolbar settings, and the  AdvancedMode tab settings
    are also saved.
    None No preview image will be displayed at startup.
    Note
    
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer MAXIFY MB5120 User Manual