Canon printer MAXIFY MB5120 User Manual

							Check the Background  check box, and select the background to be used from the list.
The current settings are displayed in the settings preview on the left side of the  PageSetup tab.4.
Set the background details
If necessary, complete the following settings, and then click  OK.
SelectBackground...button To 
use another background or change the layout or density of a background , click this.
Backgroundfirstpageonly To print the background only on the first page, check this check box.
5.
Complete the setup
Click  OK on the  PageSetup  tab.
When you execute print, the data is printed with the specified background.
Note

						

							RegisteringaStampThis feature may be unavailable when certain printer drivers or operating environments are used.
You can create and register a new stamp. You can also change and re-register some of the settings of an
existing stamp. Unnecessary stamps can be deleted at any time.
The procedure for registering a new stamp is as follows:
RegisteringaNewStamp1.
Open the printer driver setup window
2.
Click  Stamp/Background...  (Stamp... ) on the PageSetup  tab
The Stamp/Background  (Stamp ) dialog box opens.
Note

						

							3.Click DefineStamp...
The  StampSettings  dialog box opens.4.
Configure the stamp while viewing the preview window

						

							Click the Savesettings  tab and enter a title in the  Title box, and then click  Save.
Click  OK when the confirmation message appears.
Note

						

							RegisteringImageDatatobeUsedasaBackgroundThis feature may be unavailable when certain printer drivers or operating environments are used.
You can select a bitmap file (.bmp) and register it as a new background. You can also change and register some of the settings of an existing background. An unnecessary background can be deleted.
The procedure for registering image data to be used as a background is as follows:
RegisteringNewBackground1.
Open the printer driver setup window
2.
Click  Stamp/Background...  on the PageSetup  tab
The Stamp/Background  dialog box opens.
Note

						

							3.Click SelectBackground...
The  BackgroundSettings  dialog box opens.4.
Select the image data to be registered to the background
Click  SelectFile... . Select the target bitmap file (.bmp), and then click  Open.
5.
Specify the following settings while viewing the preview window
LayoutMethod Select how the background image data is to be placed.When  Custom  is selected, you can set coordinates for  X-Position and Y-Position .
You can also change the background position by dragging the image in the preview window.
Intensity Set the intensity of the background image data with the  Intensity slider. Moving the slider to the
right darkens the background, and moving the slider to the left lightens the background. To print
the background at the original bitmap intensity, move the slider to the rightmost position.
6.
Save the background
Click the  Savesettings  tab and enter a title in the  Title box, and then click  Save.
Click  OK when the confirmation message appears.
Note

						

							Select the Background  check box in the  Stamp/Background  dialog box. Then from the list, select
the title of the background you want to change.2.
Click  SelectBackground...
The  BackgroundSettings  dialog box opens.
3.
Specify each item on the  Background tab while viewing the preview window
4.
Save the background
Click  Saveoverwrite  on the Savesettings  tab. When you want to save the background with a
different title, enter a new title in the  Title box and click  Save.
Click  OK when the confirmation message appears.
5.
Complete the setup
Click  OK, then it returns to  Stamp/Background  dialog box.
The registered title appears in the  Background list.
DeletinganUnnecessaryBackground
1.
Click  SelectBackground...  in the Stamp/Background  dialog box
The  BackgroundSettings  dialog box opens.
2.
Select the background to be deleted
Select the title of the background you want to delete from the  Backgrounds list on the Savesettings
tab, and then click  Delete.
Click  OK when the confirmation message appears.
3.
Complete the setup
Click  OK, then it returns to  Stamp/Background  dialog box.
487 
						

							SettingUpEnvelopePrintingThe procedure for performing envelope printing is as follows:1.
Load envelope  on the printer
2.
Open the printer driver setup window
3.
Select the media type
Select  Envelope  from CommonlyUsedSettings  on the QuickSetup  tab.
4.
Select the paper size
When the  EnvelopeSizeSetting  dialog box is displayed, select  EnvelopeCom10, EnvelopeDL ,
Yougata44.13"x9.25" , Yougata63.86"x7.48" , EnvelopeC5 , or EnvelopeMonarch3.88"x7.5"
98.4x190.5mm  and then click OK.
5.
Set the orientation
To print the addressee horizontally, select  Landscape for Orientation .
Note

						

							printer rotates the paper 90 degrees to the left to print, regardless of the Rotate90degreesleft
whenorientationis[Landscape@  setting for CustomSettings  on the Maintenance  tab.6.
Select the print quality
Select  High or Standard  that matches your purpose for  PrintQuality.
7.
Complete the setup
Click  OK.
When you execute print, the information is printed on the envelope.
Important

						

							PrintingonPostcardsThis section describes the procedure for postcard printing.1.
Load postcard  on the printer
2.
Open the printer driver setup window
3.
Select commonly used settings
Display the  QuickSetup  tab, and for CommonlyUsedSettings , select Standard .
4.
Select the media type
For  MediaType , select InkJetHagaki(A) , InkJetHagaki , HagakiK(A) , HagakiK , Hagaki(A) , or
Hagaki .
Important