Canon printer MAXIFY MB5120 User Manual

							8.
Specify number of time and tap OK.
9.
Tap  OK.
The  Functionlist  screen is displayed.
931 
						

							SettingSenderInformationYou can set the sender information such as date/time, unit name, and unit fax/telephone number.
About Sender Information
Setting Date and Time
Setting Daylight Saving Time (Summer Time)
Registering User Information
AboutSenderInformation If the unit name and unit fax/telephone number are registered, they are printed with date and time as
sender information on the recipient's fax.
A.
Date and time of transmission
B.
Unit fax/telephone number
C.
Unit name
D.
The registered recipient's name is printed when sending faxes.
E.
Page number
Note

						

							SettingDateandTime
This section describes the procedure to set the date and time.1.
Make sure that printer is turned on.
2.
Flick HOME screen, and then tap   Setup .
Using the Operation Panel
3.
Tap  Devicesettings .
4.
Tap Deviceusersettings .
5.
Tap Date/timesetting .
6.
Set date.
1.
Tap a setting item to change.
2.
Tap number to enter.
Enter only the last two digits of the year.
3.
Tap OK.
4.
Tap  OK again when all settings are completed.
7.
Set time.
933 
						

							1.Tap a setting item to change.2.
Tap number to enter.
Enter the date and time in 24-hour format.
3.
Tap OK.
4.
Tap  OK again when all settings are completed.
8.
Press  HOME  button to return to HOME screen.
SettingDaylightSavingTime(SummerTime) Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at
certain periods of the year.
You can set your printer to automatically change the time by registering the date and time that daylight
saving time (summer time) begins and ends.
Important

						

							Using the Operation Panel3.
Tap  Devicesettings .
4.
Tap Deviceusersettings .
5.
Tap Daylightsavingtimesetting .
6.
Tap ON.
To disable summer time, tap  OFF.
7.
Set date and time when summer time starts.
1.
Set date when summer time starts.
Tap a setting item to change, and then specify the setting. Tap  OK again when all settings are
completed.
2.
Set time (in 24-hour format) when summer time starts.
Tap a setting item to change, and then specify the setting. Tap  OK again when all settings are
completed.
8.
Set date and time when summer time ends.
1.
Set date when summer time ends.
Tap a setting item to change, and then specify the setting. Tap  OK again when all settings are
completed.
935 
						

							2.
Set time (in 24-hour format) when summer time ends.Tap a setting item to change, and then specify the setting. Tap  OK again when all settings are
completed.
9.
Press  HOME  button to return to HOME screen.
RegisteringUserInformation
This section describes the procedure to register the user information.
Note

						

							6.Tap Userinformationsettings .
The screen to register the unit name and the unit fax/telephone number is displayed.7.
Enter unit name.
1.
Tap entry field under  Unitname.
The screen to enter the character is displayed.
2.
Enter unit name.
3.
Tap  OK.
Note

						

							3.
Tap OK.
Note

						

							SendingFaxesUsingOperationPanelofPrinter
SendingFaxesbyEnteringFax/TelephoneNumber
ResendingFaxes(RedialingBusyNumber)
SettingItemsforSendingFaxes
SendingFaxesUsingUsefulFunctions
939 
						

							SendingFaxesbyEnteringFax/TelephoneNumberThis section describes dialing and sending faxes directly by entering the fax/telephone numbers.
Important