Nitsuko Digital System Feature And Terminal Programming Manual

							- For Your Notes -
TABLE OF CONTENTS
iv   
  FEATURESIssue 1-0 
						

							Features: Introduction - Direct Trunk AccessINTRODUCTION
Before Reading This Section
This section provides detailed information on the system’s features.  If you don’t know what the various features
are, review the feature summary provided as part of this section’s Table of Contents.  After reviewing the feature
summary, turn back to this section for the specifics.
Using This Section
The features in this section are in alphabetical order, like a dictionary.  This section subdivides each feature defi-
nition into headings as follows:
Description tells what the feature is and describes its benefits.  Along with the Description are the Conditions
and Default Configuration.  Conditions provides the feature’s operational limits (if any).  Default Configuration
outlines how the feature works with the default programming.  When initially installed, the system uses the de-
fault configuration.
Programming explains the system programming that lets you customize the feature.  Some features require programming;
others don’t.  You must customize the Required Programming to make the feature work.  Other Programming lists addi-
tional programs you should consider when setting up the feature.  If you decide to customize a feature, use Section 2 to:
•Enter the change in the system
•Record the change on the Program Record Form (PRF)
Refer to the System Programmable Options chart at the end of this manual for a handy Feature-to-Program trou-
bleshooting reference.
Related Features presents the feature interaction.
Feature Operation consists of instructions on how to use each feature and what the user should hear while per-
forming the steps.  This tells the user what to expect before and after each instruction step.
Example:  Listen for: Dial tone
The tables that follow show the various flash and ring rates and system tones for each feature (Tables 1 through
3).
User-Programmable Features
With the correct access level, a user can customize selected features from the telephone.  The user-programma-
ble features are abbreviated in this manual:
User-programmable features include (refer to the system Administrator’s Guide for the specifics):
Call Coverage Keys Off-Hook Signaling
Central Office Calls, Answering Paging
Intercom Prime Line Selection
Group Call Pickup Ringing Line Preference
Headset Compatibility Speed Dial
Hotline Time and Date Setting
Night Answer
PGM# + + Line key + (es) or (o) + SAVEDRA Y N
Do not lift handset
and press PGM#Dial DRA (3 7 2)
Press line key Dial Y(9) or N(6)
Press SAVE
Features: Introduction - Direct Trunk Access
INTRODUCTION
N1870SWG04   Issue 1-0FEATURES   1 
						

							How to Use This Section With Section 2
Section 1, Features, works closely with Section 2, Programming (see the Illustration below).
•If a feature has a required program, go to Section 2 for the details on the program.
•The Feature Reference heading in Section 2 lists all the features for which that program is required.
The Abbreviated Number Plan Foldout
The Abbreviated Number Plan chart shows the numbers for:
•Extensions
•Trunks
•Ports
•Ring Groups
•Selectable Display Messages
•Speed Dial Blocks
•Unfold this chart (see the illustration below) when reading Sections 1 and 2. 
AUTOMATIC CALL DISTRIBUTION
E-EXTENSIONS
E5-HUNT TYPE
Description
Programming
Related Features
Feature Operation
FEATURES
SOFTWARE CONFIGURATION Description
Feature Reference
InstructionsOther Programming Required Programming
Automatic Call Distribution
1850B9
If the feature requires
the program here...
programming references
the feature here.
CP- Program COS, ACD Supervisor Keyset (BY2:6)
E3- Class of Service
EA- UCD Group Master Extension NumberFC1- Reset Queues
E5- Hunt Type
Section 2: Programming Section 1: Features
01850L23
ABBREVIATED NUMBER PLAN
Features: Introduction - Direct Trunk Access
INTRODUCTION
2   FEATURESN1870SWG04   Issue 1-0 
						

							Figure 1  KEYSET TELEPHONES 
FRI 08/18 03:34P
HOLD MIC/DNDICM
CONFMSG
01870L2
123
456
789
0
*#
ABC DEF
GHIJKL MNO
PRSTUVWXYDIAL
LAST
VOL
UP
SAVE
VOL
DN
FTR PGM
HF
Handsfree
Message WaitingFeature, Flash Programming
Mode Volume Down Volume Up Last
Number
Redial
Do Not Disturb,
Microphone Mute
Conference Hold,
Background MusicProgrammable
Feature Keys Programmable
Feature KeysDisplay
Programmable
Feature Keys
Intercom
FRI 08/18 03:34P
11 12 13 14
15 16
1
2
3
4
56
7
8
9
10
Note:Programmable keys
and feature keys
have patents pending.
Features: Introduction - Direct Trunk Access
INTRODUCTION
N1870SWG04   Issue 1-0FEATURES   3 
						

							FIGURE 2  DSS CONSOLE  
01871L4 (D)
301    302    303    304    305    306    307    308    309    310
311    312    313    314    315    316    317    318    319    320
321    322    323    324    325    326    327    328    329    330
331    332    333    334    335    336    337    338    339    340
341    342    343    344    345    346    347
PAGE  PAG 1  PAG 2  PAG 360      61      62RLS
Features: Introduction - Direct Trunk Access
INTRODUCTION
4   FEATURESN1870SWG04   Issue 1-0 
						

							Figure 3  ELECTRONIC SINGLE LINE (ESL) TELEPHONE 
01870L13
Hold
Programming
Mode Volume Down Volume Up Transfer
123
456
7
89
0TRF
VOL
UP
VOL
DN
HLDABC DEF
GHI JKL MNO
PRS TUV WXY
PGM
#
Message
Waiting LED
Features: Introduction - Direct Trunk Access
INTRODUCTION
N1870SWG04   Issue 1-0FEATURES   5 
						

							Figure 4  ANALOG STATION INTERFACE 
RINGOFF-HOOKLINE
PHONE
01850L65
To Extension Modular Jack
2500 Set
FAX Machine Flashes when
telephone rings
On when
telephone off-hook
Features: Introduction - Direct Trunk Access
INTRODUCTION
6   FEATURESN1870SWG04   Issue 1-0 
						

							Table 1  SYSTEM FLASH RATES
Graphite Phone with Dual Color LEDs
Your phone is idle (not on a call)All LEDs out (dark)
Outside Calls
An outside line is busy The line key is On Red
An outside call is ringing your phone The line key flashes Slowly Red if it’s shared, Off then
Quickly Flashing Green if it’s just for you
And then you answer it The line key is On Green 
Or answer it with Privacy released The line key flashes Quickly Green
You place the outside call on Hold The line key is On then Slowly Flashing Green
Or a co-worker places it on Hold The line key flashes Moderately Red
Or you place the outside call on Exclusive Hold The line key is On then Quickly Flashing Green 
If a call on Hold recalls to you The line key is Off then Quickly Flashing Green
Intercom Calls
An Intercom call rings your phone ICM flashes Slowly Green
You answer the Intercom call ICM flashes Quickly Red
You place the Intercom call on Hold HOLD flashes Quickly Green then On
And then it recalls to you ICM flashes Slowly Green
Miscellaneous Features
You activate Microphone Mute MIC/DND is On Red
You activate Do Not Disturb MIC/DND flashes Quickly Red
You have a Message Waiting MSG flashes Quickly Red
You activate Call Forwarding, Personal Greeting or
Selectable Display MessagingMSG flashes Slowly Green
Features: Introduction - Direct Trunk Access
INTRODUCTION
N1870SWG04   Issue 1-0FEATURES   7 
						

							Table 1  SYSTEM FLASH RATES
Phone with Single Color (Red) LEDs
Your phone is idle (not on a call)All LEDs out (dark)
Outside Calls
An outside line is busy The line key is On
An outside call is ringing your phone The line key flashes Slowly if it’s shared, Off then
flashing Quickly if it’s just for you
And then you answer it The line key is On
Or answer it with Privacy released The line key flashes Quickly
You place the outside call on Hold The line key is On then flashing Moderately
Or a co-worker places the call on Hold The line key flashes Moderately
Or you place the outside call on Exclusive Hold The line key is On then flashing Quickly
If a call on Hold recalls to you The line key is Off then flashing Quickly
Intercom Calls
An Intercom call rings your phone ICM flashes Slowly
You answer the Intercom call ICM flashes Quickly
You place the Intercom call on Hold HOLD is ON then  flashes Quickly
And then it recalls to you ICM flashes Slowly
Miscellaneous Features
You activate Microphone Mute MIC/DND is On
You activate Do Not Disturb MIC/DND flashes Quickly
You have a Message Waiting MSG flashes Quickly
You activate Call Forwarding, Personal Greeting or
Selectable Display MessagingMSG flashes Slowly
Features: Introduction - Direct Trunk Access
INTRODUCTION
8   FEATURESN1870SWG04   Issue 1-0 
						

							Table 1  SYSTEM FLASH RATES 
       DSS Console
All programmed extensions  idle (not on a
call)All LEDs out (dark)
Outside Calls
An outside line is busy The line key on ON Red
Intercom Calls
You place an Intercom call  DSS key being called flashes Quickly Red
You place the Intercom call on Hold HOLD flashes Moderately Red
Miscellaneous Features
An extension activates Do Not Disturb DSS key for that extension flashes Quickly
Red
Features: Introduction - Direct Trunk Access
INTRODUCTION
N1870SWG04   Issue 1-0FEATURES   9