Nitsuko Digital System Feature And Terminal Programming Manual

							The Sample Corporation worksheet entries follow.
 
1
   Assigning Selection Number 0 automatically routes these types of calls
   to Service Number 1. Make sure you program Service Number 1 with
   the DDD lines.
01850C58
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1 NNX
DDD DDD DDD DDD0 271
01850C59
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1 1+
NNX
MCI MCI MCI MCI1 27
01850C60
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1
2 1+
NPA-
NXX
(less
312-
355)
WATTS5 MCI2 27
05WATTS5 WATTS5
MCI MCI MCI WATTS5
Description
EXAMPLE OF SAMPLE CORPORATION
40Automatic Route Selection 
						

							 
After compiling all the necessary data and completing the ARS Work-
sheet, the data on the worksheet can be transposed to the appropriate
PRF’s for data entry into the system.
01850C55
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1
2
3 1+
312-
355
FX FX FX FX
WATS5 MCIWATS5 WATS5
MCI MCI MCI WATS53 27
05
05
01850C56
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1 Direct.
assist.
call
(411, or
555 in
any NPA)
DDD DDD DDD DDD4 05DDD
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection41 
						

							Step 6
Complete the Dial Treatments Table PRF (Table 2-4).
The next step is constructing any dial treatments necessary to accommo-
date the services switching the outgoing calls. The first and only choice
for routing NNX (local) calls is on the DDD circuits (Service #1). By not
assigning a Selection Number to any NNX we can accomplish the correct
routing. 
Note:
 If a Selection Number is not assigned to a number, the call will auto-
matically be routed on Service Number 1 (DDD) with no Dial Treatment
.
The routing for toll calls within the home NPA directly dialed with or with-
out the leading 1 is determined by Selection Number 01. The choice is the
MCI dial-up service which uses Dial Treatment 01 when used for this Se-
lection Number. This treatment:
•Strips the leading 1 (if dialed)
•Inserts the home NPA (required by MCI dial-up)
•Dials the local number for MCI access
•Pauses up to six Dial Tone Detection counts for MCI dial tone
•Dials the MCI access code
•Outdials the original number.
 
The MCI service is available to all Classes of Service for this Selection
Number. 
Description
EXAMPLE OF SAMPLE CORPORATION
42Automatic Route Selection 
						

							 
The first choice for calls outside the home NPA, except to (312-355) calls
is WATS5 (Service #5). Class of Service will not restrict access to WATS5
and no special dial treatment is required (just a redial of the initially dialed
digits). Second choice for the above calls outside of the home NPA is the
MCI dial-up service. Only extensions with a COS of 05 or lower can use
MCI, and Dial Treatment 02 must be used. Dial Treatment 02 will:
•Strip the leading 1 (if dialed)
•Dial the MCI local number
•Pause for up to six Dialtone Detection counts
•Dial the MCI access code
•Outdial the initial number dialed.
 
01850C63
DT# DIAL TREATMENT ENTRY
12I203D149262027PP24554RE
01850C64
DT# DIAL TREATMENT ENTRY
1
22I203D149262027PP24554RE
2D149262027PP24554RE
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection43 
						

							The next type of calls to consider are those placed to Area Code 312 ex-
change 355. Since the extension user will dial this call the same way as
any long distance call, each route option must be considered. The first op-
tion for this type of call is the FX route. Since the FX line(s) are directly
terminated to the system, a call to this area code and exchange is a local
call. Hence, we need a dial treatment (03) that will convert the dialed num-
ber into a local type number.  It must strip the leading 1, strip the area
code (NPA), and redial the original number.
 
Since the second route chosen for this type of call is WATS5, no Dial
Treatment was necessary for this option.  The last option for this call is
MCI. Since the NPA would be dialed in the original number, Dial Treat-
ment #2 is required for this route. 
01850C62
DT# DIAL TREATMENT ENTRY
1
2
32I203D149262027PP24554RE
2D149262027PP24554RE
32RE
Description
EXAMPLE OF SAMPLE CORPORATION
44Automatic Route Selection 
						

							Step 7
Complete the Call Route Options PRF (Table 2-5).
Using the information compiled thus far, fill in the Call Route options for
the four rate periods of each selection number. The Sample Corporation
has five Selection Numbers and four rate periods. Although 19 copies of
the table are required to completely document the routing choices, much
of the information is repetitive.
Selection Number 01 - Rate Periods 1-4
The routing for toll calls within the home NPA dialed with or without the
leading 1 is determined by Selection Number 01. The choice is the MCI
dial-up service. The service is available to all extensions.
 
01850C73
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27 01 01
1
1-4
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection45 
						

							Selection Number 02 - Rate Periods 1, 2, and 3 
Selection Number 02 is used primarily for toll calls outside the home
NPA. First choice for these calls is WATS5 (Service #5). Class of Service
will not restrict access to WATS5. Second choice for calls outside of the
home NPA is the MCI dial-up service. Only extensions with a COS of 05
or lower can use MCI.
 
01850C74
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27
0505
0100
01
2
1-3
Description
EXAMPLE OF SAMPLE CORPORATION
46Automatic Route Selection 
						

							Selection Number 02 - Rate Period 4
For Rate Period 4, the MCI dial-up service is more economical than the
WATS service. For Selection Number 02, the route preference and Class
of Service restrictions are reversed from what they are for Rate Periods 1,
2 and 3.
 
Selection Number 03, Rate Periods 1 - 3
Selection Number 03 is used for routing calls to 312 - 355. The first rout-
ing choice is the FX terminated at 312 - 355. The second choice is the
WATS 5 service; the third choice is MCI. The FX and WATS 5 services
are available to all Classes of Service, while the MCI service is available
only to extensions with a COS 05 or lower. The FX service uses Dial
Treatment 03 to strip the NPA and leading 1 from the call. WATS 5 re-
quires no special dialing, and Dial Treatment 02 is used for MCI. This
treatment strips the leading 1, dials the MCI local number, waits for MCI
dial tone, dials the MCI access code and the initial number dialed.
01850C70
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27
0501
0501
00
2
4
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection47 
						

							 
Selection Number 03 - Rate Period 4 uses the same routing as Rate Periods 1-
3 except that the positions of the WATS5 and MCI services are reversed. In ad-
dition, the Class of Service restriction on MCI is removed and placed on
WATS 5. Dial Treatments remain the same.
 
01850C72
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27
2703
0503
00
3
1-3
05 01 02
01850C71
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27
2703
0103
02
3
4
05 05 00
Description
EXAMPLE OF SAMPLE CORPORATION
48Automatic Route Selection 
						

							Selection Number 04, Rate Periods 1 - 4
Selection number 04 is used to apply Class of Service restrictions on Di-
rectory Assistance calls. All 411 and 555 calls are routed to the AT&T
DDD service; however, these calls can be placed only from extensions
with Class of Service 05 or lower. Call routing is identical for all four
Rate Periods. Dial Treatment 00 is specified.
 
01850C75
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27 01 00
4
1-4
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection49