Nitsuko Digital System Feature And Terminal Programming Manual

							Step 8
Complete the 3-digit and 6-Digit Tables
The 3-Digit Table
The 3-digit Table PRF (Table 2-6) is used to assign Selection Numbers to
NPA and NNX codes. Codes with similar routing requirements should
have the same Selection Number. To enter data for Sample Corporation on
the 3-digit table, refer to the sample table (on the page 2-42) and use the
procedure that follows:
•Initially assign all NPA codes to Selection Number 02. This data
will be block-loaded into the system during program entry (refer to
Section 3). Since the system is in a leading 1 area, and all NPAs
must be dialed with a leading 1, enter the same Selection Number
into the 1+CODE SEL # and the CODE SEL # columns. 
Note:
 If an NPA is dialed without a leading 1, the C.O. will intercept the
call. 
•Area code 312 requires 6-digit translation.  Although this code is in-
cluded on the 3-digit table as part of a block of NPAs, ARS will
never look at the 3-digit table if the code is correctly entered on the
6-digit table.
•Assign all NNX codes Selection 01. This data will also be block-
loaded in system programming.  Enter this Selection Number in
both columns of the 3-digit table.  Since all local NNX’s are being
routed to the DDD lines, we must now remove these codes and as-
sign them no Selection Number (00), in both columns. For the Sam-
ple Corporation the local NNX’s are 881-888; 926-929. 
•A separate Selection Number (04) for exchange 555 is required be-
cause long distance directory assistance (1 + NPA + 555 + 1212) is a
fixed rate toll charge. Although 555 calls will be routed over AT&T
DDD lines, access to 555 will be restricted according to an exten-
sion’s Class of Service (refer to Step 7). Local Directory Assistance
is toll free. 
•Since Sample Corporation is not in a Conflict Area, check the NO
box for the SYSTEM IN A CONFLICT AREA? prompt. 
Description
EXAMPLE OF SAMPLE CORPORATION
50Automatic Route Selection 
						

							•For the MINIMUM COS TO DIAL 976? prompt, enter 00. Only ex-
tensions with Class of Service 00 can dial exchange 976. 
•800 is a Toll-Free NPA for DDD, and should be assigned no Selec-
tion #.
Note: 
911 and in some cases 1+911 are EMERGENCY codes used on the
DDD Network. These codes MUST be routed to the DDD Network and
access MUST be granted to all instruments with access to outgoing lines.
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection51 
						

							3-Digit Table for Sample Corporation
 
* 800 is a Toll-Free NPA for DDD and should not be assigned a Selection
#.
** 911 (and in some cases 1+911) are Emergency Codes used on the DDD
network. These codes must be routed to the DDD network and access
must be granted to all telephones with access to outgoing lines.
SYSTEM IN A CONFLICT AREA?
YES NOMINIMUM COS TO DIAL 976?
01850C68
X00*
3-DIGIT
CODE1+CODE
SEL # CODE
SEL #
200-219
300-319
400-419
500-519
600-619
700-719
801-819
900-919
911
41102 02
02 02
02 02
02 02
02 02
02 02
02 02
02 02
00 00
04 04
**
3-DIGIT
CODE1+CODE
SEL # CODE
SEL #
220-299
320-399
420-499
520-554;
556-599
620-699
720-799
820-880;
889-899
881-888
920-925;
930-999
55501 01
01 01
01 01
01 01
01 01
01 01
01 01
00 00
01 01
04 04 926-929
80000 00
00 00
Description
EXAMPLE OF SAMPLE CORPORATION
52Automatic Route Selection 
						

							The 6-Digit Table
The 6-Digit Table PRF (Table 2-7) is used for NPA 312 to identify calls to
the 312-355 FX exchange. If a MATCH occurs, Selection Number 03 is
chosen. All other calls to NPA 312 are routed as long distance calls out-
side of the home NPA. Enter NPA 312 and an NNX list of 355 as shown
below:
 
AREA 
CODEMATCH
SEL #DEFAULT
SEL #NNX
LIST
01850C77
312 03 02 355
6-Digit Table for Sample Corporaton
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection53 
						

							Step 9
Assign E.A. & OPER-ASSIST data to Table 2-7.
Enter the Selection Number required to route Operator assisted, Equal ac-
cess, and International calls as described in the carrier list. Only COS5
and lower have access and route to these types of calls.
 
Step 10
Program Authorization Codes.
Authorization codes (QW) are not required by this example.
01850C78
OPERATOR ASSISTED
CALLS SEL #
INTERNATIONAL
CALLS SEL #
EQUAL ACCESS CALLS
SELECTION #04
04
04
Description
EXAMPLE OF SAMPLE CORPORATION
54Automatic Route Selection 
						

							PROGRAM RECORD FORM
Table 2-1, CARRIER LIST PROGRAM RECORD FORM
 
CARRIERSERVICE
TYPESERVICE
#USAGE INFORMATION
01850C65
Description
PROGRAM RECORD FORM
Automatic Route Selection55 
						

							TABLE 2-2, RATE PERIODS PROGRAM RECORD FORM
 
00
01850C51
0102030405060708091011121314151617181920212223 24 DAY 
OF 
WEEKTIME SLOTS
MON-FRI
SAT
SUN
HOL
MON-FRI
SUN
SAT
HOL
RATE PERIOD
00
01850C51
0102030405060708091011121314151617181920212223 24 DAY 
OF 
WEEKTIME SLOTS
MON-FRI
SAT
SUN
HOL
MON-FRI
SUN
SAT
HOL
RATE PERIOD
Description
PROGRAM RECORD FORM
56Automatic Route Selection 
						

							TABLE 2-3, ARS WORKSHEET
 
01850C54
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
Description
PROGRAM RECORD FORM
Automatic Route Selection57 
						

							Table 2-4, DIAL TREATMENT TABLE PROGRAM RECORD FORM
 
01850C61
DT# DIAL TREATMENT ENTRY
Description
PROGRAM RECORD FORM
58Automatic Route Selection 
						

							Table 2-5, CALL ROUTE OPTIONS PROGRAM RECORD FORM
 
01850C69
OPT # COS SER # DT #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SELECTION #
RATE PERIOD
Description
PROGRAM RECORD FORM
Automatic Route Selection59