TiE Onyx 2, 3, 4, 5 Service And Programming Manual

							Z-CLEARALLSMDRRECORDS
Description
Use this option to clear (erase) the 
 records from the SMDR buffer
without printing the 
 report. Clear the record when you  the
SMDR print options 
  implement this option. all records  in the
buffer are lost.
Default 
N (Records will not be cleared)
 ted
Programming
Feature Reference
Instructions
step  
Step 1 
step  l
Station  Detail Recording.
P- Print 
 Report  Print the SMDR report. The system can clear or
retain records from the SMDR buffer after the report prints.
QZ- 
 Setup.  Only for Toll Calls  Have the SMDR report
include all outside calls. or just toll calls.
QZ-  Setup, Inbound   Have the SMDR report print incoming
and outgoing calls. or just outgoing calls.
QZ- 
 Setup.   All the Time  Have the SMDR report
print after each call completes. or at a preset time.
QZ- 
 Setup.  Report Start Hour  Designate the time when
the SMDR report should print. This option does not apply if SMDR prints all
the time.
Station Message Detail Recording
System Reports, Diagnostics and Maintenance Utilities
To enter data 
 the PRF:
No entry required.
To enter data at the programming terminal:
Type 
Z. You see: CLEAR ALL SMDR RECORDS?
 Type Y to clear the records from the SMDR buffer.
OR
 Type N to leave the SMDR buffer unchanged.You return to the Main Menu.
 KELLATRONICS, 
Issue 1-O CONFIGURATION 2-369