NEC Dsx 34b Manual

							
14xx-COS (Class of Service)
140x-Station
1401-Features
DSX Software ManualSystem Options: 1001-1702◆631
System
1001-1702
1401-09: Receive DID Camp-On
(DID Camp-On)
Use this option to enable or disable the ability of a DID call to Camp-O\
n to the extension when it is busy. If 
enabled, a DID call to the extension will Camp-On for the  1601-02: DIL No Answer Timer. If still unan-
swered, the call will divert to Key Ring. If disabled, the incoming call will not Camp-On and the caller w\
ill 
hear busy tone. 
F
eatures
•Direct Inward Dialing  (page 99)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) - Enabled
1401-10: Name Programming
(Name Pgming)
Use this option to enable or disable name programming at an extension. If enabled, the extension user can 
access name programming via their soft keys. If disabled, name programming is not allowed. F
eatures
•Names for Extensions and Lines  (page 249)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) for COS 1
•
No (0) for COS 2-15
1401-11: Language Programming
(Lang Pgming)
Use this option to enable or disable an extension’s ability to set their display language. If enabled, the extension 
user can access language programming via their soft keys. If disabled, language programming is not allowed.
Features
• Language Selection  (page 217)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) for COS 1
•
No (0) for COS 2-15 
						

							
14xx-COS (Class of Service)
140x-Station
1401-Features
632◆System Options: 1001-1702 DSX Software Manual
1401-12: Call Screening
(Call Screening)
Use this option to enable or disable Call Screening. If enabled, a displ\
ay keyset use can listen to (screen) a voice 
mail message as it is being left in their mailbox. If disabled, voice mail messages go to the mailbox normally.
Features
•Call Screening  (page 453)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1401-13: Hotline Automatic Transfer
(Hotline Auto Transfer)
Use this option to enable or disable Hotline Automatic Transfer for the extension. If enabled, an extension 
user busy on a call can just press their Hotline key and hang up to Transfer. If disabled, the extension user 
must press 
TRANSFER  before  their Hotline key.
F
eatures
• Transfer  (page 358)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled 
						

							
14xx-COS (Class of Service)
140x-Station
1402-Access
DSX Software ManualSystem Options: 1001-1702◆633
System
1001-1702
1402-Access
Description
Use this program to customize station access Class of Service options.
Options
1402-01: Forced Line Disconnect
(Forced Disconnect)
Use this option to enable or disable an extension’s ability to use Forced Line Disconnect.
F
eatures
•Forced Line Disconnect  (page 182)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) for COS 1
•
No (0) for COS 2-15
1402-02: Barge In (Intrusion)
(Barge-In)
Use this option to enable or disable an extension’s ability to Barge In on a co-worker.
F
eatures
•Barge In (Intrusion)  (page 36)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s for COS 1
•
No for COS 2-15
1402-03: Camp-On to Busy Extension
(Camp-On Busy Ext)
Use this option to enable or disable an extension’s ability to Camp-On to a busy co-worker. Disable this option 
to prevent the extension from Camping-On to the busy co-worker. This option does not restrict Callback. 
Features
• Call Waiting / Camp-On  (page 58)
• Callback  (page 61)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled 
						

							
14xx-COS (Class of Service)
140x-Station
1402-Access
634◆System Options: 1001-1702 DSX Software Manual
Default
•Ye s
1402-04: Silent Monitor
(Silent Monitor)
Use this option to enable or disable an extension’s ability to use Silent Monitor.
F
eatures
•Monitor / Silent Monitor  (page 243)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1402-05: Activate Night Mode
(Night Mode)
Use this option to enable or disable an extension’s ability to activate Night Service. F
eatures
•Night Service / Night Ring  (page 252)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1)for COS 1
•
No (0) for COS 2-15
1402-06: Direct Line Access
(Direct Line Access)
Use this option to enable or disable an extension’s ability to use Direct Line Access. Note that enabling 
Direct Line Access allows the user to bypass Toll Restriction.Option.
F
eatures
•Direct Line Access  (page 115)
• Removing Lines and Extensions from Service  (page 287)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) - Enabled for COS 1
•
No (0) - Disabled for COS 2-15 
						

							
14xx-COS (Class of Service)
140x-Station
1403-SLT’s (Single Line Telephone Options)
DSX Software ManualSystem Options: 1001-1702◆635
System
1001-1702
1403-SLT’s (Single Line Telephone Options)
Description
Use this program to customize single line telephone Class of Service opt\
ions.
Options
1403-01: Flash for Single Line Set
(Flash for SLT)
Use this option to enable or disable hook flash for analog single line extensions.
F
eatures
• Flash  (page 177)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) - Enabled
1403-02: Single Ring for Single Line Set
(Single Ring)
Use this option to determine the type of ringing at analog single line e\
xtensions. If enabled, analog single 
line extensions always receive single ringing for outside calls. (Certain analog single line devices connected 
to the system may require this type of ringing.) If disabled, line ring\
ing at analog single line extensions fol-
lows the ringing pattern of the line. For example, if a line is ringing the system with two ring bursts, the sin-
gle line extensions will follow the same ringing pattern. F
eatures
•Central Of fice Calls, Answering  (page 74)
• Single Line Telephones  (page 305)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1403-03: Special Dial Tone for Single Line Set
(Special Dial Tone)
Use this option to enable or disable single line telephone Special Dial \
Tone. Note that this option has no 
effect of keyset ports with the same Class of Service. F
eatures
•Message Waiting  (page 238)
Intr
aMail Features
• None 
						

							
14xx-COS (Class of Service)
140x-Station
1403-SLT’s (Single Line Telephone Options)
636◆System Options: 1001-1702 DSX Software Manual
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1403-04: High Voltage Message Waiting Lamp for Single Line Set
(HV MW Lamp)
Use this option to enable or disable High Voltage Message Waiting for single line ports.  High Voltage  Mes-
sage Waiting is not available in DSX-40.  If both this option and 1403-05: FSK Message Waiting Lamp for 
Single Line Set  are enabled, the system uses FSK Message Waiting.
F
eatures
• Message Waiting  (page 238)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1403-05: FSK Message Waiting Lamp for Single Line Set
(FSK MW Lamp)
Use this option to enable or disable FSK Message Waiting for single line ports. If both this option and 1403-04: 
High Voltage Message Waiting Lamp for Single Line Set
 are enabled, the system uses FSK Message Waiting.
Features
• Message Waiting  (page 238)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1403-06: Loop Disconnect for Single Line Set
(Loop Disconnect)
Use this option to enable or disable the ability of the system to send a\
 loop supervision disconnect signal 
(i.e., drop pulse) to single line ports. Set this option for compatibi\
lity with the connected SLT device. (This 
option is always disabled for Voice Mail ports.) F
eatures
•Line Group Routing  (page 223)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled 
						

							
14xx-COS (Class of Service)
140x-Station
1403-SLT’s (Single Line Telephone Options)
DSX Software ManualSystem Options: 1001-1702◆637
System
1001-1702 
						

							
14xx-COS (Class of Service)
140x-Station
1404-Caller ID
638◆System Options: 1001-1702 DSX Software Manual
1404-Caller ID
Description
Use this program to customize Caller ID Class of Service options.
Options
1404-01: Caller ID Display
(CID Display)
Use this option to enable or disable the ability of an extension to display Caller ID. If enabled, Caller ID will 
occur for all extensions with this Class of Service provided Caller ID is enabled in other system program-
ming. If disabled, Caller ID will never occur for extensions with this Class of Service.
F
eatures
•Caller ID  (page 63)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) - Enabled
1404-02: Second Call Caller ID
(2nd Call CID)
Use this option to enable or disable an extension’s ability to display Second Call Caller ID. If enabled, Sec-
ond Call Caller ID will occur for all extensions with this Class of Service provided Second Call Caller ID is 
enabled in other system programming. If disabled, Second Call Caller ID \
will never occur for extensions 
with this Class of Service. F
eatures
•Caller ID  (page 63)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) - Enabled
1404-03: Third Party Caller ID
(3rd Party CID)
Use this option to enable or disable an extension’s ability to use Third Party Call Caller ID Check. If 
enabled, Third Party Caller ID Check is available to all extensions with this Class of Service provided Caller 
ID is enabled in other system programming. If disabled, Third party Caller ID check is unavailable to exten-
sions with this Class of Service. F
eatures
•Caller ID  (page 63)
Intr
aMail Features
• None 
						

							
14xx-COS (Class of Service)
140x-Station
1404-Caller ID
DSX Software ManualSystem Options: 1001-1702◆639
System
1001-1702
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1404-04: Caller ID Display Separator
(CID Display “-”)
Use this option to enable or disable the Caller ID display separator. If enabled, the telephone displays a dash 
separator after the area code and after the local exchange on a 7 or 10 digit number. If disabled, the calling 
party number displays without a separator. F
eatures
•Caller ID  (page 63)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) - Enabled
1404-05: Outgoing ANI Privacy
(OTG ANI Privacy)
Use this option to enable or disable the extension’s ability to send outbound Automatic Number Identi fica-
tion (ANI) over E1 lines using MFC dialing.  This option only applies to outbound E1 calls using MFC 
dialing, and does not apply to systems installed in North America.
F
eatures
• None
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) - Enabled
1404-06: Caller ID Alert Lamp
(CID Alert Lamps)
Use this option to enable or disable an extension’s Ring/Message Lamp for Caller ID. If enabled, the lamp will 
fl ash whenever the extension receives new Caller ID logs. If disabled, the lamp will not  flash for Caller ID.
Features
• Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled 
						

							
14xx-COS (Class of Service)
140x-Station
1404-Caller ID
640◆System Options: 1001-1702 DSX Software Manual
Default
•Ye s (1) - Enabled