NEC Dsx 34b Manual

							
37xx-Caller ID (System-Wide Options)
371x-Callback
3714-HNPA Exceptions (Home Area Code Exception List Table)
DSX Software ManualLine Options: 3101-3714◆861
Line
3101-3715
3714-HNPA Exceptions (Home Area Code Exception List Table)
Description
Use this program to set up the Caller ID Home Area Code (HNPA) Exception List Table.
Options
3714-[01-96]: Home Area Code Exception List Table Data
(xx Dial Code)
Use this option to identify which (if any) calls within your home area code are toll calls. You can set up the 
Exception List Table as a local table (L) or toll table (T). By default, the HNPA Exception List is a Toll Table 
with no entries. (This means that the system outdials  all calls within the home area code without the leading 1.)
❥When set up as a  Local Table, the system identi fies the NPA + NXX codes you enter as local codes. All 
other NPA + NXX combinations within your home area code are  flagged as toll calls.
- If  3712-02: 10-Digit Local Calls  is enabled, the system dials all local calls as 10-digit (NPA + NNX 
+ xxxx).
- If  3712-02: 10-Digit Local Calls  is disabled, the system strips the NPA and dials all local calls as 7-
digit (NXX + xxxx).
❥When set up as a  Toll Table, the system identi fies the NPA + NXX codes you enter as toll calls. The sys-
tem outdials them  with a leading 1. All other NPA + NXX combinations are considered local codes.
- If  3712-02: 10-Digit Local Calls  is enabled, the system dials all local calls as 10-digit (NPA + NNX 
+ xxxx).
- If  3712-02: 10-Digit Local Calls  is disabled, the system strips the NPA and dials all local calls as 7-
digit (NXX + xxxx).
F
eatures
• Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
• 3 digits (using 0-9)
•
* for wild card representing any digit
Default
• The HNPA Exception List is a Toll Table with no entries (i.e.,  all calls within the home area code outdial 
without the leading 1). 
						

							
37xx-Caller ID (System-Wide Options)
371x-Callback
3715-FNPA Exceptions (Foreign Area Code Exception List Table)
862◆Line Options: 3101-3714 DSX Software Manual
3715-FNPA Exceptions (Foreign Area Code Exception List Table)
Description
Use this program to set up the Caller ID Foreign Area Code (FNPA) Exception List Table.
Options
3715-[01-96]: Foreign Area Code Exception List Table Data
(xx Dial Code)
If your dialing area has calls in an adjacent area code that are local c\
alls, enter those codes in this table. If the 
system finds the code in the table, it will dial it as 10-digit (without the lea\
ding 1). If the system does not  find 
the code, the system will outdial it as 1 + 10-digit.
F
eatures
•Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
• 3 digits (using 0-9)
•
* for wild card representing any digit
Default
• None (no entry) 
						

							
41xx-Configuration
410x-System (Voice Mail System Options)
4101-Type
DSX Software Manual  Voice Mail Options: 4101-4231◆863
Voice Mail
4101-4231
Voice Mail Options: 
4101-4231
41xx-Con figuration
410x-System (Voice Mail System Options)
4101-Type
Description
Use this program to set the voice mail type and master number.
Options
4101-01: Voice  Mail Type
(VM Type)
Use this option to set the type of voice mail connected to your system. F
eatures
•Message Waiting  (page 238)
• Voice Mail  (page 372)
Intr
aMail Features
• None
Options
•0 for none
•
1 for Built-In Automated Attendant
•
2 for IntraMail
•
3 for UltraMail (DSX-80/160 only)
•
4 for external
Default
•1 with IntraMail installed
•
3 with UltraMail installed (DSX-80/160 only)
•
0 if no voice mail installed 
						

							
41xx-Configuration
410x-System (Voice Mail System Options)
4101-Type
864◆Voice Mail Options: 4101-4231 DSX Software Manual
4101-02: Voice Mail Master Number
(VM UCD Master)
Use this option to set the voice mail master extension number (e.g., 700). In most installations, you should 
not change this option from its default setting (700) .
F
eatures
• Voice Mail  (page 372)
Intr
aMail Features
• None
Options
•Extension number using 0-9 (3 digits max.) 
Default
•700 
						

							
41xx-Configuration
411x-Ports (Voice Mail Port Setup)
4111-Options (Voice Mail Port Options)
DSX Software ManualVoice Mail Options: 4101-4231◆865
Voice Mail
4101-4231
411x-Ports (Voice Mail Port Setup)
4111-Options (Voice Mail Port Options)
Description
Use this program to enter the voice mail port name as well as set the voice mail Class of Service and Toll 
Restriction Level.
Options
4111-01: Voice Mail Port Name
(Name)
Use this option to modify the name for all voice mail ports. The system displays this name when a keyset 
user calls a voice mail port (either by pressing 
V-MAIL or dialing the master number). You should always end 
the name with the # character. The system substitutes the port number for the #. Using the default name  VM 
PORT #  for example, the keyset display shows  VM PORT 1 when calling port 1.
F
eatures
• Voice Mail  (page 372)
Intr
aMail Features
• None
Options
• See  Name Programming Chart  (page 867)
Default
•VM PORT #
4111-02: Voice Mail Port Class of Service
(COS Level)
Use this option to set the Class of Service for all voice mail ports. Normally, you use the voice mail port 
Class of Service to control Message Noti fication callouts. 
Features
• None
Intr
aMail Features
• Message Noti fication  (page 535)
Options
•1-15 for Class of Service 1-15
Default
•2 
						

							
41xx-Configuration
411x-Ports (Voice Mail Port Setup)
4111-Options (Voice Mail Port Options)
866◆Voice Mail Options: 4101-4231 DSX Software Manual
4111-03: Voice Mail Port Toll Restriction Level (Day)
(Day Toll  Level)
Use this option to set the day mode Toll Restriction Level for all voice mail ports. This allows you to restrict 
Message Notification callouts placed during the day.
F
eatures
• None
Intr
aMail Features
• Message Noti fication  (page 535)
Options
•0-7 for Toll Levels 0-7
Default
•0
4111-04: Voice Mail Port Toll Restriction Level (Night)
(Night Toll  Level)
Use this option to set the night mode Toll Restriction Level for all voice mail ports. This allows you to 
restrict Message Noti fication callouts placed at night.
F
eatures
• None
Intr
aMail Features
• Message Noti fication  (page 535)
Options
•0-7 for Toll Levels 0-7
Default
•0 
						

							
41xx-Configuration
411x-Ports (Voice Mail Port Setup)
4111-Options (Voice Mail Port Options)
DSX Software ManualVoice Mail Options: 4101-4231◆867
Voice Mail
4101-4231
Name Programming Chart
Name Programming Chart
Press a key the indicated number of times for desired character
Key1 Time2 Times3 Times4 Times5 Times6 Times7 Times8 Times9 Times
1 &-  / ‘ 1
2ABC a b c 2
3DE F d e f 3
4GH I g h i 4
5 JKL j k l 5
6MNOmn o 6
7 PQRS p q r s 7
8 TUV t u v 8
9WX Y Z w x y z 9
0space : 0
#Not used
*Not used
After selecting a letter, press a key for another letter or wait 2 seconds for the cursor to automatically advance.
Additional Name Programming Options
HOLD
Save name.
SPEAKERExit user name programming.
Volume UpScroll the cursor to the right.
Volume DownScroll the cursor to the left.
CLEAR
• While editing, clears character to the right.
• At beginning of line, erases entire entry.
• At end of line, becomes a backspace key
CHECKRestore the previous entry, 
						

							
41xx-Configuration
411x-Ports (Voice Mail Port Setup)
4112-Off Hook (Voice Mail Port Off Hook Options)
868◆Voice Mail Options: 4101-4231 DSX Software Manual
4112-Off Hook (Voice Mail Port Off Hook Options)
Description
Use this program to set the voice mail dial 9 group and operator extension.
Options
4112-01: Outgoing Dial 9 Group
(Dial 9 Group)
Use this option to specify the dial-9 group for voice mail ports. Whenever a voice mail port dials 9, the sys-
tem accesses the first available line in the group speci fied by this option. This may occur when voice mail is 
processing Message Noti fication callouts. 
F
eatures
• None
Intr
aMail Features
• Message Noti fication  (page 535)
Options
•90-98 for line groups 90-98
Default
•90
4112-02: Operator’s Extension
(Operator Ext)
Assign the voice mail operator. This is the extension reached when a voice mail port dials 0. F
eatures
•Voice Mail  (page 372)
Intr
aMail Features
• None
Options
•Extension number
•None (Entered by pressing CLEAR)
Default
•300 
						

							
41xx-Configuration
411x-Ports (Voice Mail Port Setup)
4113-Line Access (Voice Mail Port Outgoing Line Access)
DSX Software ManualVoice Mail Options: 4101-4231◆869
Voice Mail
4101-4231
4113-Line Access (Voice Mail Port Outgoing Line Access)
Description
Use this program to set the voice mail outgoing line access.
Options
4113-xx: Outgoing Line xx Access
(Line xx Access)
Use this option to set the voice mail port’s access options for lines (no access, incoming only, outgoing only, 
or full access).
F
eatures
• None
Intr
aMail Features
•Message Noti fication  (page 535)
Options
•0 for no access
•
1 for incoming access only
•
2 for outgoing access only
•
3 for full access
Default
•3 for all extensions 
						

							
41xx-Configuration
411x-Ports (Voice Mail Port Setup)
4114-Group Access (Outgoing Line Group Access)
870◆Voice Mail Options: 4101-4231 DSX Software Manual
4114-Group Access (Outgoing Line Group Access)
Description
Use this program to set the voice mail Line Group access.
Options
4114-xx: Outgoing Line Group xx Access
(Group xx Access)
Use this option to enable or disable the voice mail port’s outgoing access to each Line Group (90-98).
F
eatures
• None
Intr
aMail Features
•Message Noti fication  (page 535)
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
❥Ye s (1) - Enabled