NEC Dsx 34b Manual

							
90xx-Utilities
902x-Copy
9021-Station Copy
DSX Software ManualMaintenance Options: 9001-9211◆921
Maintenance
9001-9032
902x-Copy
9021-Station Copy
Description
Use this program to copy data from an extension to another extension or range of extensions.
Options
9021-01: Station Copy
(Station Copy)
This option allows you to copy station data from one extension to another extension or range of extensions. 
The table below shows the programs you can copy.
F
eatures
• None
Intr
aMail Features
• None
Options
• Turn to the following page for help using 9021: Station Copy.
Default
• None
9021 - Station Copy Program Options
OptionStation ProgramOptionStation Program
01
2101-Type (Station Type)1132122-Ring Override
022102-Access142123-BLF
032103-Ringing152124-Soft Keys
042104-Display162131-Lines
052111-Features172132-Ringing
062112-Speaker Control182133-Line Groups
072113-Groups192141-Type (Mailbox Type)
082114-Off Hook202142-Setup (Mailbox Setup)
092115-Hunt/Over flow212143-Options (Mailbox Options)
102116-Off Hook Signal222144-Auto-Attendant (Mailbox AA Options)
112117-Call Logging232151-Assignment (Personal Speed Dial Bins)
122121-Feature Keys
1 2101-02: Names data is not copied 
						

							
90xx-Utilities
902x-Copy
9021-Station Copy
922◆Maintenance Options: 9001-9211 DSX Software Manual
Using 9021-01: Station Copy
To copy data from an extension to another extension or range of extensions: 1.
Access option 9021-01. You see: Copy Program
2.Press HOLD and select the option (01-23) corresponding to the station program yo\
u want to copy.
• You can dial the option number (01-23) or press Volume Up and Volume Down to scroll through the selections.
3.Press HOLD. You  see: From Extension
4.Enter the source extension number + HOLD. You  see: To Extension
• This is the extension  from which the data will be copied.
5.Enter the target extension number + HOLD. You  see: Thru Extension
• This is the extension  to which the data will be copied.
• If you are copying data to a range of extensions, this is the  first (lowest) extension in the range.
6.Do one of the following.
a.If copying data to a single extension, re-enter the extension you entered in step 5 above + HOLD.
b.If copying data to a range of extensions, enter the highest (last) extension in the range + HOLD.
7.When the copy has successfully completed, you see: Copy Complete 
						

							
90xx-Utilities
902x-Copy
9022-Line Copy
DSX Software ManualMaintenance Options: 9001-9211◆923
Maintenance
9001-9032
9022-Line Copy
Description
Use this program to copy data from a line to another line or range of lines.
Options
9022-01: Line Copy
(Line Copy)
This option allows you to copy data from one line to another line or range of lines. The table below shows 
the programs you can copy.
F
eatures
• None
Intr
aMail Features
• None
Options
• Turn to the following page for help using 9022: Line Copy.
Default
• None
9022 - Line Copy Program Options
OptionLine ProgramOptionLine Program
01
3101-Type (Line Type)173121-Settings (Caller ID)
023102-Access83122-Groups (Caller ID)
033103-Settings93131-Settings (Voice Mail)
043111-Features103141-Dialing (Tie Line)
053112-Termination113142-Line Access (Tie Line)
063113-Ringing123143-Group Access (Tie Line)
1 3101-02: Names data is not copied 
						

							
90xx-Utilities
902x-Copy
9022-Line Copy
924◆Maintenance Options: 9001-9211 DSX Software Manual
Using 9022-01: Line Copy
To copy data from a line to another line or range of lines: 1.
Access option 9022-01. You see: Copy Program
2.Press HOLD and select the option (01-12) corresponding to the line program you w\
ant to copy.
• You can dial the option number (01-23) or press Volume Up and Volume Down to scroll through the selections.
3.Press HOLD. You  see: From Line
4.Enter the source line number + HOLD. You  see: To Line
• This is the line  from which the data will be copied.
5.Enter the target line number + HOLD. You  see: Thru Line
• This is the line  to which the data will be copied.
• If you are copying data to a range of lines, this is the  first (lowest) line in the range.
6.Do one of the following.
a.If copying data to a single line, re-enter the line you entered in step 5 above + HOLD.
b.If copying data to a range of lines, enter the highest (last) line in the ra\
nge + HOLD.
7.When the copy has successfully completed, you see: Copy Complete 
						

							
90xx-Utilities
903x-Swap Ports
9031-Station Swap
DSX Software ManualMaintenance Options: 9001-9211◆925
Maintenance
9001-9032
903x-Swap Ports
9031-Station Swap
Description
Use this program swap two extensions. This swaps  all the programming between the two extensions, includ-
ing the extension number and station name. With 9031-Station Swap, it is no longer necessary to install and 
wire cross-connect blocks to easily swap two extensions.
Options
9031-01: Station Swap
(Swap with Ext)
This option allows you swap two extensions. This swaps  all the programming between the two extensions. If 
the extension being swapped is a 2PGDAD Module Door Box port with the secondary port assigned, this 
program will also swap the secondary port.
F
eatures
• None
Intr
aMail Features
• None
Options
• See below.
Default
• None
Using 9031-01: Station Swap
To swap two extensions:
1.
Access option 9031-01.
2.Press TRANSFER and select the  first extension.
3.Press HOLD and enter the second extension.
4.Press HOLD again to make the swap. You see: Swap Complete!
• You cannot swap an extension busy on a call. 
						

							
90xx-Utilities
903x-Swap Ports
9032-Line Swap
926◆Maintenance Options: 9001-9211 DSX Software Manual
9032-Line Swap
Description
Use this program swap two line circuits. For example, if you swap line 1 with line 2, line 1 now uses the 
telco circuit formerly assigned to line 2 and vise versa. With 9032-Line Swap, it is no longer necessary to 
install and wire cross-connect blocks to easily swap two lines.
Options
9032-01: Line Swap
(Swap with Ext)
This option allows you swap two line circuits.
F
eatures
• None
Intr
aMail Features
• None
Options
• See below.
Default
• None
Using 9032-01: Line Swap
To swap two lines: 1.
Access option 9032-01.
2.Press TRANSFER and select the  first line extension number.
3.Press HOLD and enter the second line extension number.
4.Press HOLD again to make the swap. You see: Swap Complete! 
						

							
90xx-Utilities
904x-Backup/Restore
9041-Backup
DSX Software ManualMaintenance Options: 9001-9211◆927
Maintenance
9001-9032
904x-Backup/Restore
9041-Backup
Description
Use this option to back up (save) the system database to a CompactFlash Card plugged into the IntraMai\
l 
CompactFlash Card slot. You can then restore (load) the system database using  9042-Restore (page 928). 
You can store the system database on the IntraMail CompactFlash Card or o\
n a separate FAT16 or FAT32 
formatted CompactFlash card. The entire system database uses about 500 Kbytes Of Compact Flash mem-
ory. See your system’s  Hardware Manual for more and how to install a CompactFlash Card.
Options
9041-01: Backup to CompactFlash
(Backup to CF)
Use this option to back up the system database to a CompactFlash Card. You can use  9042-Restore 
(page 928) to restore the saved data.
F
eatures
•System Programming Backup and Restore  (page 335)
Intr
aMail Features
• None
Options
•No (0) - Do not backup
•
Ye s (1) - Start backup
Default
• None
Using 9041-01: Backup
To backup your DSX system database: 1.
Insert your CompactFlash card into the system’s IntraMail CompactFlash Card slot. • You can use your IntraMail CompactFlash for backup or a standard FAT16/FAT32 formatted card.
• The DSX system database only takes up 500K Bytes of your CompactFlash Card memory.
2.Access option 9041-01. You see: Backup to CF
2.Press HOLD and do one of the following.
a.
Dial 1 (Yes) + HOLD to begin the backup.
• During the backup: - You  see:
 Please Wait
- The CPU Serial Port LED (DS-80/160) winks on (green).
- The CompactFlash LED occasionally winks on (red).
• When the backup completes (after about 1 minute), you see: 
Backup Complete!
b.Dial 0 (No) + SPEAKER to abort the backup. 
						

							
90xx-Utilities
904x-Backup/Restore
9042-Restore
928◆Maintenance Options: 9001-9211 DSX Software Manual
9042-Restore
Description
Use this option to restore (load) the database previously backed-up (saved) on a CompactFlash Card using 
9041-Backup (page 927). Note that you can store the system database on the IntraM\
ail CompactFlash Card 
or on a separate FAT16 or FAT32 formatted CompactFlash card. The entire system database uses about 500 
Kbytes Of Compact Flash memory. See your system’s  Hardware Manual for more and how to install a Com-
pactFlash Card.
Options
9042-01: Restore from CompactFlash
(Restore from CF)
Use this option to restore the system database previously saved to a CompactFlash Card using  9041-Backup 
(page 927).
F
eatures
•System Programming Backup and Restore  (page 335)
Intr
aMail Features
• None
Options
•No (0) - Do not restore
•
Ye s (1) - Start restore
Default
• None
Using 9042-01: Restore
To restore your DSX system database: 1.
Insert your CompactFlash card into the system’s IntraMail CompactFlash Card slot. • Use the same CompactFlash Card to which you previously backed up the site data.
2.Access option 9042-01. You see: Restore from CF
2.Press HOLD and do one of the following.
a.Dial 1 (Yes) + HOLD to begin the restore.
• The system will automatically restart with the restored data loaded.
b.Dial 0 (No) + SPEAKER to abort the restore. 
						

							
DSX Program List929
DSX 
Program List
DSX Program List
DSX Program List
System Options: 1001-1702
10xx-Configuration
100x-System 1001-Version 1001-01: System Type
1001-02: Software Version
1001-03: DSP Version
101x-ID 1011-Name 1011-01: System Name
1011-02: Telephone Number
Name Programming Chart
102x-Time 1021-Set Time and Date 1021-01: System Time
1021-02: System Date
1022-Daylight Savings Time 1022-01: Automatic Daylight Savings Time Setting
1023-Internet (Network Time Server [NTS]) 1023-01: Network Time Server Name
103x-Programming 1031-Password Entry 1031-01: New Password
11xx-CPU
110x-I/O1101-RS232 Settings 
						

							
DSX Program List
930DSX Program List
1101-01: Baud Rate
1102-Modem Settings
1103-USB Settings
1104-Ethernet Setup 1104-01: System IP Address
1104-02: System Subnet Mask
1104-03: Default Gateway
111x-Tones 1111-DTMF Setup 1111-01: Manual DTMF Tone On
1111-02: Manual DTMF Tone Off
1111-03: Speed Dial DTMF Tone On
1111-04: Speed Dial DTMF Tone Off
12xx-Slots
120x-Stations1201-Type (Station Card Type) 1201-01: Card Type
1202-Ports (Primary Station Ports) 1202-01: Primary Station Port Assignment
1203-Secondary Station Ports 1203-01: Secondary Station Port Assignment
121x-Lines 1211-Lines (Line Card Type) 1211-01: Card Type
1212-Ports 1212-01: Line Port Assignment
1213-T1/E1 Card Setup 1213-01: Number of PCM Channels
1213-02: Clock Control
1213-03: Transmit Pulse Amplitude
1213-04: Framer Type
1213-05: Zero Suppression
1213-06: Loopback Mode
13xx-Numbering
130x-Dial Plan1301-Digits 1301-[01-10]: Function Type
1301-[01-10]: Expected Number of Digits
131x-Extensions 1311-Stations 1311-01: Station Extension Number
1312-Voice Mail Ports 1312-01: Voice Mail Extension Number
1313-Lines 1313-01: Line Extension Number
1314-Ring Groups 1314-01: Ring Group Master Extension Number
1315-UCD Groups 1315-01: UCD Group Master Extension Number
14xx-COS (Class of Service)
140x-Station1401-Features