NEC Dsx 34b Manual

							
35xx-Toll Restriction
355x-XXX / TBL-B-XXX (NPA/NXX Dialing 3-Digit Table)
3552-Table Entries
DSX Software ManualLine Options: 3101-3714◆851
Line
3101-3715
3552-Table Entries
3552-xx: Table  Data
(Dial Code)
Use this option to enter data into the  NPA/NXX Dialing 3-Digit Table. You can enter up to 96 codes.
F
eatures
• Toll Restriction  (page 351)
Intr
aMail Features
• None
Options
•3 digits using 0-9
•* is a wild card entry representing any digit 
						

							
35xx-Toll Restriction
356x-XXX-XXX / TBL-B XXXXXX (NPA + NXX Dialing 6-Digit Table)
3561-Table Options
852◆Line Options: 3101-3714 DSX Software Manual
356x-XXX-XXX / TBL-B XXXXXX (NPA + NXX Dialing 6-Digit Table)
3561-Table Options
Description
Use this program to set up the NPA + NXX Dialing 6-Digit Table . By default, this type of dialing is enabled 
because the  NPA + NXX Dialing 6-Digit Table  is a deny table with no entries (i.e., it denies nothing). A table 
entry is 3 digits long, using the digits 0-9. You can use the * character as a wild card, which can be entered in 
any position in the table. A wild card allows the table to accept any digit in that position. For example, the 
entry 2*0 represents 200 through 290. The Veri fied Account Code Table can hold up to 96 entries.
Do not enter either 911 or 1911 into the table. When a user presses a line key and dials either 911 or 1911, 
the system immediately bypasses all Toll Restriction and Account Code programming and routes the call.
Options
3561-01: Initialize Table
(Initialize Table)
Use this option to initialize the  NPA + NXX Dialing 6-Digit Table .
F
eatures
• Toll Restriction  (page 351)
Intr
aMail Features
• None
Options
•No (0) - Initialize the  NPA + NXX Dialing 6-Digit Table .
•
Ye s (1) - Do not initialize the  NPA + NXX Dialing 6-Digit Table .
Default
• N/A
3561-02: Table Type (Allow or Deny)
(Allow/Deny)
Use this option to designate the table as an allow or deny table. If set as an allow table, Toll Restriction will 
allow (permit) only those codes programed into the table.If set as a deny table, Toll Restriction will deny 
(block) only those codes listed in the table. F
eatures
•Toll Restriction  (page 351)
Intr
aMail Features
• None
Options
•0 for deny
•1 for allow
Default
•0 
						

							
35xx-Toll Restriction
356x-XXX-XXX / TBL-B XXXXXX (NPA + NXX Dialing 6-Digit Table)
3562-Table Entries
DSX Software ManualLine Options: 3101-3714◆853
Line
3101-3715
3562-Table Entries
3562-xx: Table  Data
(Dial Code)
Use this option to enter data into the  NPA + NXX Dialing 6-Digit Table. You can enter up to 96 codes.
F
eatures
• Toll Restriction  (page 351)
Intr
aMail Features
• None
Options
•3 digits using 0-9
•* is a wild card entry representing any digit 
						

							
36xx-AC Codes (Verified Account Codes Table)
360x-Setup
3601-Codes
854◆Line Options: 3101-3714 DSX Software Manual
36xx-AC Codes (Verified Account Codes Table)
360x-Setup
3601-Codes
Description
Use this option to enter codes into the Veri fied Account  Codes Table. When  1412-05: Verified Account Codes  
(page 651) is enabled, the system compares the Account Code the user dials to the entries in this table. If an 
entry matches, the system allows the call (provided it is not prevented by an extension’s Toll Restriction). If 
there is no match, the system denies the call.
A Veri fied Account Code can be from 1 to 10 digits long, using the digits 0-9. You can use the * character as 
a wild card, which can be entered in any position in a Veri fied Account Code. A wild card allows the user to 
dial any digit in that position. For example, the entry 11*1 represents entries 1101, 1111, 1121, etc.
The Veri fied Account Code Table can hold up to 1000 entries.
Do not enter either 911 or 1911 into the Veri fied Account Codes Table. When a user presses a line key and 
dials either 911 or 1911, the system immediately bypasses all Toll Restriction and Account Code program-
ming and routes the call.
Options
3601-xx: Veri fied Account Code Data
(Account Code)
Use this option to enter codes into the Veri fied Account  Codes Table.
F
eatures
• Account Codes  (page 14)
Intr
aMail Features
• None
Options
•Digits (10 max, using 0-9 and * as a wild card representing any digit).
• 1000 table entries maximum.
Default
• No entries. 
						

							
37xx-Caller ID (System-Wide Options)
370x-Log Groups (Caller ID Logging Groups)
3701-Setup
DSX Software ManualLine Options: 3101-3714◆855
Line
3101-3715
37xx-Caller ID (System-Wide Options)
370x-Log Groups (Caller ID Logging Groups) 3701-Setup
Description
Use this program to set the record size (capacity) of each Caller ID L\
ogging Group.
Options
3701-[01-08]: Caller ID Logging Group Size
(CID Group 1 Log Size)
Determine the total number of Caller ID records that can be stored in ea\
ch Caller ID Group. Each group can 
contain up to 99 records. When assigning records, you cannot exceed the total allowed by the system (1000). 
For example, if you attempt to assign 50 records and there are only 10 left, \
the system will automatically 
change your entry to 10
F
eatures
•Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
•0-99 Caller ID Group records
Default
• Group 1 has 99 records and all other groups are blank 
						

							
37xx-Caller ID (System-Wide Options)
371x-Callback
3711-Route
856◆Line Options: 3101-3714 DSX Software Manual
371x-Callback
3711-Route
Description
Use this program to set up the Caller ID callback route.
Options
3711-01: Caller ID Callback Route Type
(Route Type)
Use this option to specify the type of route used for Caller ID callback\
s (line or Line Group).
F
eatures
•Caller ID Logging  (page 68)
Intr
aMail Features
• Caller ID and Voice Mail  (page 456)
• Make Call  (page 525)
Options
•0 for none
•
1 for line
•
2 for Line Group
Default
•0
3711-01: Caller ID Callback Line
(Callback Line)
For a type 1 (line) Caller ID callback route, use this option to select\
 the line (1-64) the system will use when 
placing the callback. F
eatures
•Caller ID Logging  (page 68)
Intr
aMail Features
• Caller ID and Voice Mail  (page 456)
• Make Call  (page 525)
Options
•1-64 (line 1-64)
•
Unde fined (entered by pressing CLEAR)
Default
• Unde fined 
						

							
37xx-Caller ID (System-Wide Options)
371x-Callback
3711-Route
DSX Software ManualLine Options: 3101-3714◆857
Line
3101-3715
3711-01: Caller ID Callback Group
(Callback Group)
For a type 2 (Line Group) Caller ID callback route, use this option to \
select the Line Group (90-98) the sys-
tem will use when placing the callback.
F
eatures
•Caller ID Logging  (page 68)
Intr
aMail Features
• Caller ID and Voice Mail  (page 456)
• Make Call  (page 525)
Options
•90-98 (Line Group 90-98)
•
Unde fined (entered by pressing CLEAR)
Default
• Unde fined 
						

							
37xx-Caller ID (System-Wide Options)
371x-Callback
3712-Treatment Options (Caller ID Callback Dial Treatment Options)
858◆Line Options: 3101-3714 DSX Software Manual
3712-Treatment Options (Caller ID Callback Dial Treatment Options)
Description
Use this program to set the Caller ID Dial Treatment options.
Options
3712-01: Initialize Caller ID Dial Treatment Tables
(Initialize Table)
Use this option to initialize the 3713-Home NPA’s (Home Area Code Table)  (page 860), the 3714-HNPA 
Exceptions (Home Area Code Exception List Table)  (page 861), and the 3715-FNPA Exceptions (Foreign 
Area Code Exception List Table)  (page 862).
F
eatures
• Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
•No (0) - Exit the option without initializing
•
Ye s (1) - Initialize the Caller ID Dial Treatment Tables
Default
• N/A
3712-02: 10-Digit Local Calls
(10 Digit Local Calls)
Use this option to indicate if the system is installed in an area that u\
ses 10 digit local calling. Enable this 
option if the system is in a 10-digit local calling area. Disable this o\
ption if the system is not in a 10-digit 
local calling area. If enabled, the system will dial all your local Call\
er ID callbacks as 10-digit calls. 
If dis-
abled, the system will dial all your local Caller ID callbacks as 7-digi\
t calls.
Features
• Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled 
						

							
37xx-Caller ID (System-Wide Options)
371x-Callback
3712-Treatment Options (Caller ID Callback Dial Treatment Options)
DSX Software ManualLine Options: 3101-3714◆859
Line
3101-3715
3712-03: Home Area Code Exception List Type
(HNPA Exception Type)
Use this option to set the Home Area Code Exception List type (toll or local).
F
eatures
•Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
•0 for local
•
1 for toll
Default
•0 
						

							
37xx-Caller ID (System-Wide Options)
371x-Callback
3713-Home NPA’s (Home Area Code Table)
860◆Line Options: 3101-3714 DSX Software Manual
3713-Home NPA’s (Home Area Code Table)
Description
Use this program to set up the Caller ID Home Area Code (HNPA) Table.
Options
3713-[01-16]: Home Area Code Table Data
(xx HNPA #x)
Use this option to specify your system’s home area code. This is the area code in which the system is 
installed.   You must make an assignment in this program so that Caller ID can properly process c\
allbacks 
(return calls).
Options  3712-03: Home Area Code Exception List Type  through 3715-[01-96]: Foreign Area Code Excep-
tion List Table Data  determine how the system redials Caller ID calls received as 10 digits or less. This is the 
US standard (i.e., the leading 1 is not received from telco for long distance calls). If the system is in an area 
where the telco provides more than 10 digits, the digits are redialed as is (with no modi fication).
F
eatures
• Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
• 3 digits (using 0-9)
•
* for wild card representing any digit
Default
• None (no entry)