NEC Dsx 34b Manual

							
15xx-Options
152x-MOH/BGM
1521-Setup
DSX Software ManualSystem Options: 1001-1702◆661
System
1001-1702
1521-05: Audio Input 1 Gain Setting
(Audio #1 Gain)
Use this option to set the gain (volume) of Audio Input 1.
F
eatures
•Music on Hold  (page 246)
Intr
aMail Features
• None
Options
•01-25 (-12 dB to +12 dB in 1 dB steps)
Default
•13 (0 dB)
1521-06: Audio Input 2 Gain Setting
(Audio #2 Gain)
Use this option to set the gain (volume) of Audio Input 2. F
eatures
•Music on Hold  (page 246)
Intr
aMail Features
• None
Options
•01-25 (-12 dB to +12 dB in 1 dB steps)
Default
•13 (0 dB) 
						

							
15xx-Options
153x-Paging
1531-Setup
662◆System Options: 1001-1702 DSX Software Manual
153x-Paging
1531-Setup
Description
Use this program to set up External Paging.
Options
1531-01: External Page Ring Type
(Page Ring Type)
Use this option to indicate the type of ringing that will broadcast over the External Page (none, station, or line).
Features
•Paging  (page 259)
Intr
aMail Features
• None
Options
•0 for none
•
1 for station
•
2 for line
Default
•0
1531-02: Extension Ring Over External Page
(Page Ring Extension)
If  1531-01: External Page Ring Type  is 1 (station), use this option to enter the number of the extension that 
should ring over the External Page.
F
eatures
•Paging  (page 259)
Intr
aMail Features
• None
Options
•Extension number (0-999)
Default
• No entry 
						

							
15xx-Options
153x-Paging
1531-Setup
DSX Software ManualSystem Options: 1001-1702◆663
System
1001-1702
1531-03: External Page Ring Volume
(Page Ring Volume)
Use this option to adjust the volume of ringing over the External Paging system. This option does not affect 
the volume of Background Music, Door Chime, or External Page voice broadcasts. You can additionally 
control the volume of audio broadcasting from the External Page port in  1531-05: External Page Gain.
F
eatures
• Paging  (page 259)
Intr
aMail Features
• None
Options
•1 for low
•
2 for medium
•
3 for high
Default
•2 
						

							
15xx-Options
153x-Paging
1531-Setup
664◆System Options: 1001-1702 DSX Software Manual
1531-04: Door Chime Over External Page
(Page DoorChime)
Use this option to enable Door Chimes over External Page.
F
eatures
•Paging  (page 259)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1531-05: External Page Gain
(External Page Gain)
Use this option to control the volume of any audio broadcasting from the External Page output. This includes 
Page broadcasts, Door Chimes, and ringing. Note that if you increase the \
External Page ring volume in 
1531-05: External Page Gain , you can additionally increase or decrease the volume of the Page output in 
this option.
F
eatures
•Paging  (page 259)
Intr
aMail Features
• None
Options
•01-25 (-12 dB to +12 dB in 1 dB steps)
Default
•13 (0 dB) 
						

							
15xx-Options
153x-Paging
1532-Ring Control
DSX Software ManualSystem Options: 1001-1702◆665
System
1001-1702
1532-Ring Control
Description
If External Paging is set up to broadcast line ringing, use this program to specify t\
he ringing type for each line.
Options
1532-[01-64]: External Page Line Ringing
(Line nn Ring)
If  1531-01: External Page Ring Type  is 2 (line), use this option to individually set the ringing for each line 
over the External Page.
F
eatures
•Paging  (page 259)
Intr
aMail Features
• None
Options for eac
h line (1-64)
•Extension number (0-999)
•
0 for no ringing
•
1 for day and night ringing
•
2 for night ringing only
•
3 for delay ringing day and night
Default
• No entry 
						

							
15xx-Options
154x-SMDR (Station Message Detail Recording)
1541-Setup
666◆System Options: 1001-1702 DSX Software Manual
154x-SMDR (Station Message Detail Recording)
1541-Setup
Description
Use this program to set up the SMDR options.
Options
1541-01: SMDR Port
(SMDR Port)
Use this option to specify the port the system uses for SMDR.
F
eatures
•Station Message Detail Recording  (page 328)
Intr
aMail Features
• None
Options
•0 for none
•
1 for RS232 port
Default
•0
1541-02: Print SMDR Headers
(SMDR Headers)
Use this option to enable or disable the header from the SMDR report. In\
 enabled, the header will print at the 
beginning of the SMDR report and at the top of each page. F
eatures
•Station Message Detail Recording  (page 328)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•Ye s (1) - Enabled
1541-03: SMDR Language
(SMDR Language)
Use this option to set the language of the SMDR header and the data in t\
he SMDR Call Type (T)  field.
F
eatures
• Language Selection  (page 217)
• Station Message Detail Recording  (page 328)
Intr
aMail Features
• None
Options
•1 for English
•
2 for Spanish
Default
•1 
						

							
15xx-Options
155x-Account Codes
1551-Setup
DSX Software ManualSystem Options: 1001-1702◆667
System
1001-1702
155x-Account Codes
1551-Setup
Description
Use this program to customize system-wide Account Code options.
Options
1551-01: Dial # to Enter Account Codes
(# Key AC Codes)
Use this option to enable an extension user to dial # to enter an Account Code while on an outside call. If dis-
abled, the extension user can only enter an Account Code by pressing the Account Code soft key or a 
uniquely programmed Account Code Programmable Function Key.
F
eatures
•Account Codes  (page 14)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1551-02: Allow Account Codes in Speed Dial Bins
(Ac Codes in SPD)
Enable this option if the user should be able to store Account Codes in Speed Dial bins. This causes the 
stored Account Code to properly display in the SMDR report  Account column. If you disable this option, 
Account Codes stored in Speed Dial bins dial out as part of the stored n\
umber and display in the SMDR 
report  Number Dialed  column. They will not display in the  Account column.
F
eatures
• Account Codes  (page 14)
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1551-03: Show Account Codes on Telephone Display
(Show AC Codes)
Use this option to show or hide user-entered Account Codes on their telephone’s display. If enabled, the 
dialed Account Codes show on the display.  This may be a security risk, since a co-worker can easily read 
the telephone display as the user enters their Account Code.  If disabled, Account Codes are shown as * 
characters on the telephone display. This option is disabled by default.
F
eatures
•Account Codes  (page 14)
Intr
aMail Features
• None 
						

							
15xx-Options
155x-Account Codes
1551-Setup
668◆System Options: 1001-1702 DSX Software Manual
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
1551-04: Account Code Toll Restriction Level
(AC Toll  Level)
If  1412-06: Account Codes for Toll Calls Only  (page 651) is enabled, use this option to differentiate toll calls 
from local calls for Account Code purposes. If you enter 0 for this option, toll calls are an\
y calls the user 
dials that begin with 0 or 1. If you enter a toll level for this option (1-7), the system uses the toll level options 
programmed in  35xx-Toll Restriction  (page 839) for that level to determine if the call is local or toll.
❥If the toll level is set to deny the call, it is considered to be a long distance call and the system r\
equires 
that the user must have entered an Account Code. 
❥If the toll level permits the call, it is considered to be a local call and no Account Code entry is required.
❥Note that additional dialing restrictions enforced by an extension’s toll level are in effect and may also restrict dialing.
F
eatures
• Account Codes  (page 14)
Intr
aMail Features
• None
Options
•0-7
Default
•0  
						

							
16xx-Timers
160x-Feature Timers
1601-Incoming Call Timers
DSX Software ManualSystem Options: 1001-1702◆669
System
1001-1702
16xx-Timers
160x-Feature Timers 1601-Incoming Call Timers
Description
Use this program to adjust timers that affect incoming calls.
Options
1601-01: Line No Answer Timer
(Ring No Answer)
Use this option to set how long Hold Recall rings the extension that placed the call on hold before Key Ring 
occurs. Key Ring rings all extensions programmed to ring for that line.
This timer also sets how long a DIL to a Ring Group master number rings an idle extension before Key Ring 
or over flow occurs. Key Ring rings all extensions programmed to ring for that line.
In addition, this timer sets how long a Transfer Recall rings the extension that initially transferred the call 
before Key Ring occurs. F
eatures
•Direct Inward Dialing  (page 99)
• Direct Inward Line  (page 109)
• Group Ring  (page 189)
• Hold  (page 202)
• Key Ring  (page 214)
• Transfer  (page 358)
Intr
aMail Features
• Voice Mail Over flow  (page 590)
Options
•1-9999 seconds
•
0 for disabled
Default
•15 seconds
1601-02: DIL No Answer Timer
(DIL Ring No Answer)
Use this option to set how long a DIL to an extension rings an idle extension before Key Ring or over flow 
occurs. This option also sets how long a call rings the over flow destination before diverting to Key Ring. Key 
Ring rings all extensions programmed to ring for that line.
This timer also sets the interval after which DID Line Over flow and DID Station Intercept occur.
F
eatures
• Direct Inward Dialing  (page 99)
• Direct Inward Line  (page 109)
• Extension Hunting  (page 154)
• Group Ring  (page 189)
• Voice Mail  (page 372)
Intr
aMail Features
• Extension Hunting to Voice Mail  (page 478)
• Voice Mail Over flow  (page 590) 
						

							
16xx-Timers
160x-Feature Timers
1601-Incoming Call Timers
670◆System Options: 1001-1702 DSX Software Manual
Options
•1-9999 seconds
•
0 for disabled
Default
•15 seconds
1601-03: Call Forward No Answer Timer
(CFWD No Answer)
For Call Forwarding Ring No Answer, use this option set how long a forwarded call rings an unanswered 
extension before routing to the forwarding destination. F
eatures
•Call Forwarding  (page 44)
• Extension Hunting  (page 154)
• Transfer  (page 358)
• Call Forward to a Mailbox  (page 447)
Intr
aMail Features
• Extension Hunting to Voice Mail  (page 478)
Options
•1-9999 seconds
•
0 for disabled
Default
•10 seconds
1601-04: UCD No Answer Timer
(UCD Over flow)
Use this option to set when UCD over flow occurs. When all UCD agents are busy, a queued call rings for 
this interval and then over flows to the UCD Over flow destination.
F
eatures
• Direct Inward Line  (page 109)
• Extension Hunting  (page 154)
• Transfer  (page 358)
• Voice Mail  (page 372)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•60 seconds