NEC Dsx 34b Manual

							
31xx-Configuration
311x-Options
3112-Termination
DSX Software ManualLine Options: 3101-3714◆821
Line
3101-3715
• Voice Mail  (page 372)
Intr
aMail Features
• Voice Mail Over flow  (page 590)
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
3112-06: Night Over flow Destination
(Night Ov fl Destination)
Use this option to set the over flow destination for night mode calls (including DILs). The destination can be 
an extension, UCD Group master number, voice mail master number, Ring Group master number, or Key 
Ring (by pressing CLEAR).
F
eatures
•Direct Inward Dialing  (page 99)
• Direct Inward Line  (page 109)
• Group Ring  (page 189)
• Key Ring  (page 214)
• Voice Mail  (page 372)
Intr
aMail Features
• Voice Mail Over flow  (page 590)
Options
•Extension (0-999)
•
Key Ring (entered by pressing CLEAR).
Default
• 300 
						

							
31xx-Configuration
311x-Options
3113-Ringing
822◆Line Options: 3101-3714 DSX Software Manual
3113-Ringing
Description
Use this program to set the line Pickup Group assignment and ring types.\
If programming multiple lines, you may find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3113-01: Pickup Group Assignment
(Pickup Group)
Use this option to have an incoming call on the line ring all the extensions in the assigned pickup group.
F
eatures
•Group Call Pickup  (page 184)
Intr
aMail Features
• None
Options
•1-8 (pickup groups 1-8)
•
0 (unassigned)
Default
•0
3113-02: Day Ring Type
(Day Ring Type)
Use this option to assign a ring type (A, B, or C) for the line’s day ringing. When the line rings an extension 
in the day ring mode, it uses the ring type speci fied in this option. 
F
eatures
• Distinctive Ringing  (page 135)
Intr
aMail Features
• None
Options
•0 for standard (non-customizable system default)
•1 for ring type A
•
2 for ring type B
•
3 for ring type C
Default
•1 
						

							
31xx-Configuration
311x-Options
3113-Ringing
DSX Software ManualLine Options: 3101-3714◆823
Line
3101-3715
3113-03: Night Ring Type
(Night Ring Type)
Use this option to assign a ring type (A, B, or C) for the line’s night ringing. When the line rings an extension 
in the night ring mode, it uses the ring type speci fied in this option. 
F
eatures
• Distinctive Ringing  (page 135)
Intr
aMail Features
• None
Options
•0 for standard (non-customizable system default)
•1 for ring type A
•
2 for ring type B
•
3 for ring type C
Default
•1 
						

							
31xx-Configuration
311x-Options
3113-Ringing
824◆Line Options: 3101-3714 DSX Software Manual
3113-04: Delay Ring Type
(Delay Ring Type)
Use this option to assign a ring type (A, B, or C) for the line’s delay ringing. When the line rings an exten-
sion in the delay ring mode, it uses the ring type specified in this option. 
F
eatures
• Distinctive Ringing  (page 135)
Intr
aMail Features
• None
Options
•0 for standard (non-customizable system default)
•1 for ring type A
•
2 for ring type B
•
3 for ring type C
Default
•1 
						

							
31xx-Configuration
312x-Caller ID
3121-Settings
DSX Software ManualLine Options: 3101-3714◆825
Line
3101-3715
312x-Caller ID
3121-Settings
Description
Use this program to set the line Caller ID parameters.
If programming multiple lines, you may  find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3121-01: Caller ID Type
(CID Type)
Use this option to enable Caller ID for each line. If enabled, Caller ID\
 will occur if also enabled by the other 
Caller ID programmable options.
F
eatures
•Caller ID  (page 63)
• T1 Lines  (page 338)
Intr
aMail Features
• Caller ID and Voice Mail  (page 456)
• Make Call  (page 525)
Options
•0 for none
•
1 for DSP
•
2 for ATRU PCB daughter board
•
3 for T1/E1ANI
Default
•0
3121-02: ANI/DNIS Format
(ANI/DNIS Format)
Use this option to specify the type of ANI/DNIS Caller ID data provided by T1 lines. Set this option for com-
patibility with the incoming ANI/DNIS data provided by the local telco. When entering data, the options are:
Features
• Caller ID  (page 63)
• T1 Lines  (page 338)
Intr
aMail Features
• Caller ID and Voice Mail  (page 456)
• Make Call  (page 525)
ANI/DNIS Data Format
Option Description Entry
0
The DID line will not detect ANI/DNIS data.NONE
1
The DID line will detect ANI data without using delimitersANI
2
The DID line will detect ANI data using a delimiter (*) at the begin-
ning and end of the ANI Caller ID string.*ANI*
3
The DID line will detect DNIS data without using delimiters.*DNIS*
4
The DID line will detect both ANI and DNIS data using a delimiter 
(*) at the beginning and end of the string. An additional delimiter 
separates the ANI and DNIS data.*ANI*DNIS* 
						

							
31xx-Configuration
312x-Caller ID
3121-Settings
826◆Line Options: 3101-3714 DSX Software Manual
Options
•0 for none
•
1 for ANI
•
2 for *ANI*
•
3 for *DNIS*
•
4 for *ANI*DNIS*
Default
•0
3121-03: ANI/DNIS Delimiter
(ANI/DNIS Delimiter)
For ANI/DNIS format options 2-4 (see  3121-02: ANI/DNIS Format above), use this option to set the type of 
data delimiter provided by the telco. The delimiter designates the beginning and end of the ANI/DNIS data 
string. The delimiter can be any character 0-9, # or *. Always set this option for compatibility with the 
incoming ANI/DNIS data provided by the local telco.
F
eatures
•T1 Lines  (page 338)
Intr
aMail Features
• None
Options
•Digit 0-9, # or * (single digit entry)
Default
•*
3121-04: Number of ANI Digits
(# ANI Digits)
For ANI/DNIS format option 1 (see  3121-02: ANI/DNIS Format above), use this option to specify the num-
ber of digits in the ANI number. This is required for option 1 since delimiters do not mark the beginning and 
end of the data string. The system must know how many digits of incoming ANI Caller ID data to interpret.
F
eatures
•T1 Lines  (page 338)
Intr
aMail Features
• Caller ID and Voice Mail  (page 456)
• Make Call  (page 525)
Options
• 1-16
Default
•10 
						

							
31xx-Configuration
312x-Caller ID
3122-Groups
DSX Software ManualLine Options: 3101-3714◆827
Line
3101-3715
3122-Groups
Description
Use this program to specify to which Caller ID Groups the line belongs.
If programming multiple lines, you may  find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3122-[01-08]: Caller ID Group Membership
(xx CID Group x)
Use this option to indicate into which Caller ID Logging Group the line \
should log its calls. The line can be 
a member of any or all groups.
F
eatures
•Caller ID Logging  (page 68)
Intr
aMail Features
• None
Options
•No (0) - Logging disabled for selected group.
•
Ye s (1) - Logging enabled for selected group.
Default
•Ye s (1) - Enabled for all groups 
						

							
31xx-Configuration
313x-Voice Mail
3131-Settings
828◆Line Options: 3101-3714 DSX Software Manual
313x-Voice Mail
3131-Settings
Description
For each line, use this program to set the voice mail Caller ID option and IntraMail Answer Table.
If programming multiple lines, you may find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3131-01: Pass Caller ID to Voice Mail
(Pass CID to VM)
Use this option to enable or disable the capability of the line to send \
Caller ID data to voice mail. If enabled, 
the line will send incoming Caller ID data to voice mail. (This will occur, for example, if the line is a DIL 
terminated to the voice mail master number.) If disabled, the line will not provide Caller ID data to voice 
mail. If you enable this option, you must also enable Caller ID in  3121-01: Caller ID Type (page 825).
F
eatures
• Caller ID  (page 63)
Intr
aMail Features
• Caller ID and Voice Mail  (page 456)
• Make Call  (page 525)
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default
•No (0) - Disabled
3131-02: IntraMail Answer Table Assignment
(Intramail Answer Table #)
Use this option to assign an IntraMail Answer Table to the line. F
eatures
• None
Intr
aMail Features
•Answer Tables  (page 420)
• Automated Attendant  (page 433)
• Flexible Answering Schedules  (page 486)
• Multiple Company Greetings  (page 550)
Options
•1-8 for Answer Tables 1-8
Default
•1 
						

							
31xx-Configuration
313x-Voice Mail
3131-Settings
DSX Software ManualLine Options: 3101-3714◆829
Line
3101-3715
3131-03: Line Voice Prompt Language
(Voice Prompts)
Use this option to set the line voice prompt language. You can choose either the Primary Language or the 
Secondary Language. To activate a different primary or Secondary Language, see  4203-Voice Prompts 
(Active System Voice Prompt Languages)  (page 879).
F
eatures
• None
Intr
aMail Features
• Bilingual Voice Prompts  (page 443)
Options
•1 for Primary Language
•
2 for Secondary Language
Default
•1 for Primary Language 
						

							
31xx-Configuration
314x-TIE Line
3141-Dialing
830◆Line Options: 3101-3714 DSX Software Manual
314x-TIE Line
3141-Dialing
Description
For each tie line, use this program to select the line’s dial 9 group and operator extension.
If programming multiple lines, you may find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3141-01: Tie Line Caller’s Outbound Dial 9 Group
(Dial 9 Group)
Use this option to specify the Line Group (0-8) selected when an incom\
ing (remote) Tie Line callers dials 9 
to place an outgoing call. This is the Line Group in the local system used by the remote Tie Line caller for 
placing outgoing calls.
F
eatures
•Tie Lines  (page 344)
Intr
aMail Features
• None
Options
•90-98 for Line Groups 90-98
Default
•90
3141-02: Tie Line Caller’s Operator Extension
(Operator Ext)
Use this option to specify the extension reached in the local system when an incoming (remote) Tie Line 
caller dials 0. F
eatures
•Tie Lines  (page 344)
Intr
aMail Features
• None
Options
•Extension (0-999)
Default
•300