Konica Minolta bizhub 420 User Manual

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-13
4Close the ADF.
The original size will be detected automatically and displayed in the 
message area of the Basic Screen, while an appropriate paper size will 
be selected automatically by Auto Paper Select and displayed in the 
Paper area.
2
Reminder 
When Book Copy, Auto Original Size Detect mode of Image Repeat, 
Centering or Non-Image Area Erase is selected, the ADF should not be 
closed while all the originals are scanned.
In this case, be sure to manually select the desired paper size, as the 
machine cannot detect the original size automatically.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-14 bizhub 500/420/360 (Phase 3)
4.3 Setting Print Quantity
This section describes how to set or change print quantity.
To set print quantity
The machine is set to copy one grouped set as factory default.
With two or more of print quantity specified, the Sort mode will be 
automatically selected. 
0Print quantity can be entered in any instance of the procedure unless the 
control panel keypad is temporarily used for entering other values.
1Enter the desired print quantity from 
the control panel keypad.
Entered quantity will be displayed on the touch panel.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-15To change print quantity
Follow the procedure below to change the print quantity that has been 
already entered.
1Press [C] (Clear) on the control panel.
The quantity displayed on the touch panel will return to 1.
2Enter the correct quantity from the control panel keypad.
Newly entered quantity will be displayed on the touch panel.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-16 bizhub 500/420/360 (Phase 3)
4.4 Density Setting
The machine is initially set to detect the density of the original image and 
automatically select an appropriate exposure for the copy.
Adjust the exposure level manually in order to make a copy darker or lighter 
than the print result of Auto Density.
The following two types of density adjustments are provided.
Density: Select the exposure level of print image from nine levels.
Background Removal: Select the exposure level of the background color of 
the colored original from nine levels.
!
Detail 
The Original Image Type setting is also provided for the original written in 
a pencil or with a half-tone photo image that often has difficulty in 
adjusting the exposure level.
For details, see Making Copy Quality Closer to Original (Original Image 
Type) on page 5-21.
To adjust Density/Background Removal
1Touch [Density] on the Basic Screen.
The Density Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-17
2Select the desired exposure level.
– Nine levels are provided to adjust the density of print image.
Touching [Light]/[Dark] once makes it lighter/darker by one level.
– Touch [Std.] to specify the middle of the nine levels.
– Touch [Auto] to set the machine to automatically detect the original 
density level and select the optimum exposure for printing.
3Select the desired background density level.
– Nine levels are provided to adjust the density of the background 
color of colored original.
Touching [Light]/[Dark] once makes it lighter/darker by one level.
– Touch [Std.] to specify the middle of the nine levels.
4Touch [OK] on the Density Screen.
The Basic Screen will be restored.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-18 bizhub 500/420/360 (Phase 3)
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-19
4.5 Paper Size Setting
The following two modes are provided to select the paper size.
Select either mode to cope with the desired copying operation.
-Automatically select the paper size according to the original size.
-Manually select the desired paper size.
To select paper size automatically (Auto Paper Select)
This mode detects the original size placed in the ADF or on the original glass 
and makes a copy of an appropriate paper size selected automatically.
If Zoom is set to e1.000, the machine selects the same paper size as the 
original.
If other magnification ratio is selected, the machine automatically specifies 
an appropriate paper size according to the magnification ratio selected.
0The machine is initially set to operate e1.000 Zoom and Auto Paper 
Select as factory default.
0Auto Paper Select and Auto Zoom are incompatible.
0The paper size loaded in bypass tray can also be detected and selected 
automatically by Auto Paper Select.
0The trays specified as Special Paper cannot be selected by Auto Paper 
Select. Use this setting for loading special paper in a tray.
See page 15-12 for details of Paper Type, and see Paper Setting for 
Bypass Tray on page 4-23.
1Touch [Paper] on the Basic Screen.
The Paper Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-20 bizhub 500/420/360 (Phase 3)
2Touch [Auto Paper Select].
3Touch [OK].
The Basic Screen will be restored with Auto Paper Select displayed on 
the Paper key.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-21To select paper size manually
Making a copy with the desired paper size and magnification ratio specified, 
copied image may be too large to fit in, or too small compared with the 
selected paper size.
In this case, Auto Zoom can be used to automatically select an appropriate 
magnification ratio according to the original size and specified paper size. 
For details, see To select a magnification ratio automatically (Auto Zoom) 
on page 4-54.
1Touch [Paper] on the Basic Screen.
The Paper Screen will be displayed.
2Touch the desired tray key to highlight it.
– On the tray keys are indicated the size and orientation of the loaded 
paper. If the tray is specified as Exclusive, the Exclusive icon is also 
displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-22 bizhub 500/420/360 (Phase 3)
3Touch [OK].
The Basic Screen will be restored with the selected paper size and 
orientation displayed on the Paper key.
!
Detail 
For details of the paper type icon, see Special Paper on page 10-12.
!
Detail 
The machine is initially set to enable Auto Zoom immediately after the 
original is loaded in the ADF.
However, positioning the original on the original glass does not 
automatically activate Auto Zoom as factory default. An administrator 
can set the machine to enable this function. See Auto Zoom (Platen) on 
page 16-136 for details.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals