Konica Minolta bizhub 420 User Manual

							3Before Making Copies
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies3
bizhub 500/420/360 (Phase 3) 3-3
3 Before Making Copies
3.1 Machine Configuration
External
5 2
13
4
678
9
1110
12
13
14
15
16
17
18
19
20
21 22 2324
Downloaded From ManualsPrinter.com Manuals 
						

							3Before Making Copies
3-4 bizhub 500/420/360 (Phase 3)
No.NameDescription
1 Left partition glass Scans the original positioned in the ADF.
2 Document scales Used to align the document.
3 Document  pad Presses down on the document positioned on the original 
glass.
4 Original glass Scans the image of the loaded document.
5 Control panel Use to specify the various settings and perform opera-
tions such as starting copying. Refer to page 3-22 for de-
tails.
6 Machine Status indicator Indicates machine status by combining the color (green 
or red) and the state (steady on or blinking).
7 Adjustable  paper  guides Used as guides with which to align the original positioned.
8 Paper tray Place the original face up.
9 Original output tray Feeds out scanned originals.
10 Document stopper Set in a standing position to prevent large-sized originals 
falling off the original output tray.
11 Sub power switch Turns on/off the copying and scanning functions.Turning 
it off will terminate all the functions other than printing, 
and receiving and outputting facsimile data, and then en-
ter the sleep mode.
12 Automatic duplex unit door 
release leverOpens the automatic duplex unit door in case of paper 
misfeeds within the automatic duplex unit.
13 Automatic duplex unit door Opened when clearing paper misfeeds within the auto-
matic duplex unit.
14 Release lever for the right-
side door of the main unitPulled out to open the right-side door of the main unit.
15 Release lever for the vertical 
conveyance door of the main 
unitSlided to the right to open the vertical conveyance door 
when clearing paper misfeeds.
16 Bypass tray entrance door le-
verHeld to slide to the front of the bypass tray entrance door 
when clearing paper misfeeds.
17 Bypass tray Opened and used to print on the type of paper that is not 
or cannot be set in the other trays, including thick paper, 
overhead projector transparencies, envelopes or label 
sheets.
18 Tray extension Opened when large-sized paper is to be loaded into the 
bypass tray.
19 Adjustable document guides Used as guides with which to align the paper.
20 Tray 1 A maximum of 500 sheets of A3 to A5 plain paper (80 
g/m
2) can be loaded
21 Tray 2 A maximum of 500 sheets of A3 to A5 plain paper (80 
g/m
2) can be loaded.
22 Paper-empty indicator Indicates the remaining number of sheets of paper in the 
paper tray. As the amount of paper in the paper tray de-
creases, the area that appears in red increases.
Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies3
bizhub 500/420/360 (Phase 3) 3-5
23 Front door Opened when replacing the toner cartridge, or cleaning 
the writing unit glass or corona wire. Refer to page 11-4 
and page 13-5, for details.
24 Paper output tray Collects printed pages.
No.NameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							3Before Making Copies
3-6 bizhub 500/420/360 (Phase 3)
26
27
28
29
30
3125
Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies3
bizhub 500/420/360 (Phase 3) 3-7
No.NameDescription
25 ADF connector Used for connecting the ADF hookup cord.
26 Toner filter Collects the toner dust generated in the machine.
27 Power cord Supplies power to the machine.
28 Ventilation duct Releases exhaust heat from the machine.
29 IEEE1284 port (type C) Used for connecting a parallel cable from the computer.
30 USB port (type B) USB 
2.0/1.1-compliantUsed for connecting to a computer via a USB cable.
31 Network connector (10 Base-
T/100 Base-TX)Used for connecting to the network cable for a local net-
work when this machine is used for network printing and 
network scanning.
Downloaded From ManualsPrinter.com Manuals 
						

							3Before Making Copies
3-8 bizhub 500/420/360 (Phase 3)Internal
1
2
3
4
5
7 6
8 9 10
Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies3
bizhub 500/420/360 (Phase 3) 3-9
No.NameDescription
1 Fusing guide lever Held to open the fusing guide cover when clearing paper 
misfeeds.
2 Envelope lever Pulled up when printing on envelope.
3 Ozone filter Collects the ozone generated in the machine.
4 Switchback unit Built into the printer to turn over the paper during double-
sided printing.
5 Automatic  duplex  unit  door Held to open the Automatic duplex unit when clearing pa-
per misfeeds.
6 Conveyance unit lever Held to open the Conveyance unit when clearing paper 
misfeeds.
7 Toner cartridge cover Opened to pull out the toner cartridge holder when re-
placing the toner cartridge.
8 Corona wire cleaning lever Pull out when cleaning the corona wire.
9 Writing unit glass cleaning le-
verPull out when cleaning the writing unit glass.
10 Main power switch Used for turning on/off the machine.
Downloaded From ManualsPrinter.com Manuals 
						

							3Before Making Copies
3-10 bizhub 500/420/360 (Phase 3)Options
12
4
5
6
7 8
9 1011
1213 14
1516
17
18
19 20
21 - 233 24
25
No.NameDescription
1 Main unit Consists of a scanner, a printer, an ADF, and paper feed-
ers (2 trays and 1 bypass tray).
2 Mount Kit MK-708 Used to install the Fax kit.
3 Multiple Line Expansion Kit 
ML-503Used to expand the telephone line for exclusive use of 
facsimile.
4 Large Capacity Unit LU-201 Can be loaded with up to 2,000 sheets of paper (80 g/m
2).
5 Desk  DK-501 Set up on the floor, allowing the machine to be positioned 
on top. Can store copying material.
6 Paper Feed Cabinet PC-202 Consists of 2 trays, each of which can be loaded with up 
to 500 sheets of paper (80 g/m
2).
7 Paper  Feed  Cabinet  PC-402 Can be loaded with up to 2,500 sheets of paper (80 g/m
2).
8 Relay Unit RU-502 Relays paper between the main unit and finisher FS-511.
Downloaded From ManualsPrinter.com Manuals