Konica Minolta bizhub 420 User Manual

							Advanced Information8
bizhub 500/420/360 (Phase 3) 8-5
8Delete the current job, if required, then restart the job setting.
– To delete the current job, use up/down arrow keys to scroll to the 
job in the job list, if displayed in the sub area, then touch the job key 
to highlight it.
Touch [Delete] to display the popup menu for confirmation, then 
touch [Yes].
9Touch [Print] on the Proof Copy Screen.
The machine will start printing the rest except the sample sets.
!
Detail 
To stop scanning/printing for the proof copy or to stop printing after proof 
copying, press [Stop] on the control panel.
For details, see To Stop/Resume/Delete a Job on page 4-78.
Downloaded From ManualsPrinter.com Manuals 
						

							8Advanced Information
8-6 bizhub 500/420/360 (Phase 3)
8.2 Checking Feature Selections before Copying (Mode 
Check)
Display the Mode Check Screen to check and change the feature selections 
you made.
To use Mode Check function
1Position the original, and enter the desired print quantity.
2Select the desired copy conditions.
– Scan the original, if any setting requires.
3Press [Mode Check] on the control 
panel.
The Mode Check Screen will be 
displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Information8
bizhub 500/420/360 (Phase 3) 8-7
4Check the job settings on the screen.
– The Mode Check Screen comprises three different pages. The 
screen number for the current page is indicated in the center of the 
upper part of the screen.
Touch [Back] or [Fwd.] to scroll to the desired page.
– If setting change is desired, proceed to the next step.
– If settings are OK, touch [Job End] on the Mode Check Screen, then 
proceed to step 7.
Downloaded From ManualsPrinter.com Manuals 
						

							8Advanced Information
8-8 bizhub 500/420/360 (Phase 3)
5Touch the key of the function to be changed.
The setting screen for that function will be displayed.
6Change the setting as desired.
– Follow the procedure specified for each function.
– To make more than one setting change, repeat the steps from 3 
to 6.
7Press [Start] on the control panel.
The machine will start printing.
!
Detail 
To stop printing, press [Stop] on the control panel. For details, see To 
Stop/Resume/Delete a Job on page 4-78.
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Information8
bizhub 500/420/360 (Phase 3) 8-9
8.3 Interrupt Copying
Use the Interrupt mode to interrupt printing in progress to perform another 
job in different settings. The interrupted job will resume automatically when 
the interrupt copying is completed.
To copy using Interrupt mode
0To interpose a newly entered job not into the current printing job but 
between two reserved jobs, use the Increase Priority function. For details, 
see Increase Priority for Printing an Active Job in Current Jobs on 
page 9-22.
0The Interrupt mode cannot be entered while the machine is scanning the 
original. Press [Interrupt] after scanning is completed.
0Once the Interrupt mode is entered, the current printing job will be 
suspended and all the settings will resume the initial setting.
1Position the original for the interrupt job.
2Press [Interrupt] on the control panel.
When the machine is working on a 
printing job, the message Job is 
stopping will be displayed.
The Interrupt LED lights up in green, 
and then printing job stops.
3Enter the print quantity for the interrupt job.
4Set copy conditions, as desired.
5Press [Start] on the control panel.
The interrupt copying will start.
Downloaded From ManualsPrinter.com Manuals 
						

							8Advanced Information
8-10 bizhub 500/420/360 (Phase 3)
6When the interrupt printing job is 
completed, press [Interrupt] again.
The Interrupt LED goes off, and the 
settings of the initial job will be 
restored on the screen.
The suspended printing will be 
continued automatically.
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Information8
bizhub 500/420/360 (Phase 3) 8-11
8.4 Storing and Recalling Job Settings (Mode Memory)
Use Mode Memory to store the desired copy job settings, which can be 
readily recalled at any time for copying. This function is convenient for 
frequently used settings of complicated operation.
We recommend you to store those complicated settings that can be 
expected for another or more use.
To store copy program
Up to 30 copy programs can be stored with given alphanumeric names.
0Name the stored program. Up to 16 characters can be used.
0The given name can be edited. For details, see To change program 
name on page 8-18.
0The contents of stored program cannot be altered for reentry. However, 
setting change is available for the program once recalled to make a copy, 
and those job settings can be stored as a new program.
0If 30 copy programs are already stored, new entry becomes unavailable. 
In this case, delete an unnecessary program to store a new program. For 
details on deleting copy programs, see To delete copy program on 
page 8-20
0The administrator can set the machine to lock the programs so that they 
cannot be deleted individually or the given name cannot be edited. For 
details, see 6 Restrict User Access>1 Restrict Access to Saved Program 
Jobs on page 16-63.
1Position the original, then make the desired job settings.
– Use control panel and touch panel keys to select the desired copy 
conditions.
2Press [Mode Memory] on the control 
panel.
The Recall Copy Program Screen will 
be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							8Advanced Information
8-12 bizhub 500/420/360 (Phase 3)
3Touch [Program Registration].
The Program Name Screen will be displayed.
4Enter the desired program name.
– Up to 16 characters can be entered.
Use right/left arrow keys to move the cursor, and use [Shift] to enter 
upper case letters or symbols.
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Information8
bizhub 500/420/360 (Phase 3) 8-13
5Touch [OK] to return to the Basic Screen.
The copy program has been stored successfully.
2
Note 
To cancel the program registration, press [Reset] or [Mode Memory] on 
the control panel before returning to the Basic Screen. The program 
registration will be cancelled from any screen displayed on the touch 
panel.
Otherwise, touch [Cancel] repeatedly until the Basic Screen is restored.
Downloaded From ManualsPrinter.com Manuals 
						

							8Advanced Information
8-14 bizhub 500/420/360 (Phase 3)To recall copy program
Follow the procedure below to recall the stored copy program. The job 
settings can be checked before recalling them.
0The job settings cannot be changed from the Check Job Screen. If any 
setting change is desired, recall the copy program then access the 
desired setting screen, or press [Mode Check] to jump to the desired 
setting from the Mode Check Screen. For details, see Checking Feature 
Selections before Copying (Mode Check) on page 8-6.
1Position the original.
2Press [Mode Memory] on the control 
panel.
The Recall Copy Program Screen will 
be displayed.
3Touch the desired copy program key to highlight it.
– To recall the program without checking job settings, proceed to 
step 8.
Downloaded From ManualsPrinter.com Manuals