Konica Minolta bizhub 420 User Manual

							Application Functions6
bizhub 500/420/360 (Phase 3) 6-29To copy using Chapters
0Load the original in the ADF. If the number of original sheets exceeds 80, 
use Separate Scan mode. For details, see Separate Scan Setting on 
page 4-69.
0With Separate Scan mode selected, the original glass can also be used 
to scan the original.
0Up to 30 title pages can be specified for the original from 1 to 999 pages.
0The tray selection can be changed for printing specified title pages. 
However, it cannot be changed individually for each title page.
1Position the original.
– When using ADF, be sure to arrange the original in page order, and 
then place it with the first page faceup; otherwise the copy result 
may not be satisfactory.
– When using original glass, be sure to scan from the first page of the 
original in page order; otherwise the copy result may not be 
satisfactory.
2Enter the desired print quantity from the control panel keypad.
3Select [1%1] or [2%1] mode.
– For details on specifying Simplex/Duplex Setting on page 4-56.
Downloaded From ManualsPrinter.com Manuals 
						

							6Application Functions
6-30 bizhub 500/420/360 (Phase 3)
4Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
5Touch [Sheet/Cover/Chapter Insert], then touch [Chapters].
The Chapters Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							Application Functions6
bizhub 500/420/360 (Phase 3) 6-31
6Specify the title pages.
– Touch [P---] to highlight it, then enter the desired page number from 
the control panel keypad.
– Touch up/down arrow keys to scroll the screen to use all 30 keys.
– Touch [Select].
– To change the tray selection for title pages, proceed to the next 
step.
– If tray selection is not needed, touch [Select] to display the 
Chapters Check Screen. Proceed to step 8.
?What if an entered page number is larger than the total original page 
count?
%The entered page number will be ignored.
?What if the same page number is entered twice?
%The copy result will not change. The page number entered twice or 
more will be ignored.
?Do you want to delete the page number once entered?
%Touch and highlight the page number key to be cleared, then press 
[C] (Clear) on the control panel.
Downloaded From ManualsPrinter.com Manuals 
						

							6Application Functions
6-32 bizhub 500/420/360 (Phase 3)
7Change the tray selection for title pages, if desired.
– Touch [Copy Insert], if not highlighted, to display the [Chapter 
Paper] key.
– Touch [Chapter Paper] to display the Chapter Paper Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							Application Functions6
bizhub 500/420/360 (Phase 3) 6-33– Select the tray loaded with paper for printing title pages to highlight 
it.
– Touch [OK] to return to the Chapters Screen, then touch [Select] to 
display the Chapters Check Screen.
8Check the locations on the Chapters Check Screen, and make setting 
change, if desired.
– To change the tray selection for title pages, return to the previous 
step.
– To change the title page number, touch [Edit] and return to step 6.
9Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Chapters Screen or Chapters Check Screen 
to cancel the setting change.
10Select additional copy conditions, as desired.
Downloaded From ManualsPrinter.com Manuals 
						

							6Application Functions
6-34 bizhub 500/420/360 (Phase 3)
11Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready 
for output.
2
Note 
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function, 
press [Reset] on the control panel.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							Application Functions6
bizhub 500/420/360 (Phase 3) 6-35
6.6 Scanning documents with different settings and 
printing copies all together (Program Job function)
Loaded document pages can be scanned with different settings and their 
copies can be printed together. Different Zoom or Paper settings can be 
specified for a part of the document or Finishing settings or the Set 
Numbering function can be set after the entire document is scanned, and 
then all copies can be printed together.
Downloaded From ManualsPrinter.com Manuals 
						

							6Application Functions
6-36 bizhub 500/420/360 (Phase 3)To copy using Program Job
0The Separate Scan mode will function automatically.
0Once specified, paper size setting cannot be changed for another JOB.
0Finishing mode and print quantity setting cannot be specified for each 
JOB.
0Max. 100 JOBs can be programmed for an output job.
0Program Job setting cannot be stored in Mode Memory.
1Position the original FACE UP in the ADF or FACE DOWN one the 
original glass.
– If the number of ADF originals exceeds100, them into blocks not 
exceeding 100 sheets and load them from the block with the first 
page.
2Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							Application Functions6
bizhub 500/420/360 (Phase 3) 6-37
3Touch [Sheet/Cover/Chapter Insert], then touch [Program Job].
4Select the desired copy settings, and then press [Start] on the control 
panel.
– To print a single copy to be checked, touch [Proof Copy]. Scanning 
begins.
Downloaded From ManualsPrinter.com Manuals 
						

							6Application Functions
6-38 bizhub 500/420/360 (Phase 3)
5Select [Fix], and then touch [OK].
– If the original is placed on the original glass, touch [Finish] in the 
screen that appears, requesting confirmation that scanning of the 
original is finished.
– To delete the scanning data, touch [Retry].
6Position the next document batch, and then touch [Change Setting].
Downloaded From ManualsPrinter.com Manuals