Konica Minolta bizhub 420 User Manual

							Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-15
2
Note 
The difference in original type (portrait or landscape) does not matter to 
the Original Direction setting. Specify the orientation of original simply 
according to where the top of the original is positioned.
1Position the original.
– Place the original in the ADF or on the original glass.
2Touch [Combine Originals] tab on the Basic Screen.
– The Basic Screen with the original loaded in the ADF.
– The Basic Screen with the original placed on the original glass
The Combine Originals Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							5Combine Originals/ Original Image Type
5-16 bizhub 500/420/360 (Phase 3)
3Touch [Original Direction].
The Original Direction Screen will be displayed.
4Select one of the original direction key according to the orientation of 
the positioned original.
– The Original Direction Screen with the original loaded in the ADF
Downloaded From ManualsPrinter.com Manuals 
						

							Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-17– The Original Direction Screen with the original placed on the original 
glass
5Touch [OK], then touch [Basic] tab.
The Basic Screen will be restored.
!
Detail 
The Original Direction setting will not be cleared after a job completion 
until the reset function is activated.
The machine can be set to reset the Original Direction setting to the 
factory default each time a single job is completed. For details, see 9 
Reset Setting > 3 Job Reset on page 16-93.
2
Note 
Touch [Cancel] on the Original Direction Screen to cancel the setting 
change.
Press [Reset] on the control panel to restore the factory default setting.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							5Combine Originals/ Original Image Type
5-18 bizhub 500/420/360 (Phase 3)Specifying Position of Binding Margin (Margin)
Specify the binding position of the double-sided original loaded in the ADF. 
Function overview
IconDescription
Select to automatically specify the binding position of double-sided 
original.
The longer side will be selected for A4 or smaller original sizes, while the 
shorter side will be selected for B4 or larger sizes automatically.
This setting is initially specified as factory default.
Select for the double-sided original bound on the left side.
Select for the double-sided original bound on the right side.
Select for the double-sided original bound on the top side.
A4 or smaller B4 or larger
Downloaded From ManualsPrinter.com Manuals 
						

							Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-190Load the original in the ADF.
0This setting functions effectively when 2%2 or 2%1 mode is specified in 
Simplex/Duplex setting.
0The Margin setting will not be cleared after a job completion until the 
reset function is activated.
The machine can be set to reset the Margin setting to the factory default 
each time a single job is completed. For details, see 9 Reset Setting > 3 
Job Reset on page 16-93.
1Load the original in the ADF.
2Touch [Combine Originals] tab on the Basic Screen.
The Combine Originals Screen will be displayed.
3Touch [Margin].
The Page Margin Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							5Combine Originals/ Original Image Type
5-20 bizhub 500/420/360 (Phase 3)
4Touch the desired binding position key to highlight it.
5Touch [OK], then touch [Basic] tab.
The Basic Screen will be restored.
2
Note 
Touch [Cancel] on the Page Margin Screen to cancel the setting change.
Press [Reset] on the control panel to restore the factory default setting.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-21
5.3 Making Copy Quality Closer to Original (Original 
Image Type)
Select one of the following modes according to the original image type, so 
that the copy quality more closely matches to that of the original.
Function overview
IconDescription
Select for copying the original composed of text only.
In this mode, the edges of copied text will be sharpened to provide 
higher legibility.
Select for copying the original including both text and photo image.
This mode is specified as factory default.
Select to reproduce a half-tone photo image. The copy will closely rep-
resent the half-tones of the original image.
Select for copying the original composed of text only, in order to darken 
lightly printed images (e.g. pencil) to improve the legibility.
Original Text mode
Original
Text/Photo
mode
Original Photo mode
Original Dot Matrix
mode
Downloaded From ManualsPrinter.com Manuals 
						

							5Combine Originals/ Original Image Type
5-22 bizhub 500/420/360 (Phase 3)
1Position the original.
2Touch [Orig.Image Type] tab on the Basic Screen.
The Original Image Type Screen will be displayed.
3Select the original type according to the positioned original.
4Touch [OK], then touch [Basic] tab.
The Basic Screen will be restored.
2
Note 
Press [Reset] on the control panel to restore the factory default setting.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-23
5.4 Copy Conditions Incompatible with Combine 
Originals/ Original Image Type Settings
Copy Conditions 
Incompatible 
with Combine 
Originals/
Original Image 
Type SettingsBasic
DensityPaperZoom
AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUSerLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom Combine Originals
Combine Pages2in1+*4 *4 *4 *4 *4
4in1+*4 *4 *4 *4 *4
8in1+*4 *4 *4 *4 *4
Original
Mixed 
Original
Original
Direction 
Settings
Margin
Quality
Text
Text/Photo
Photo
Dot Matrix
Downloaded From ManualsPrinter.com Manuals 
						

							5Combine Originals/ Original Image Type
5-24 bizhub 500/420/360 (Phase 3)
Copy Conditions 
Incompatible 
with Combine 
Originals/
Original Image 
Type SettingsBasic
Separate Scan
Combine OriginalsQualityApplication
Simplex/
DuplexCom-
bine 
PagesOriginal
TextText/PhotoPhotoDot MatrixOHP InterleaveCover ModeInser t SheetInsert ImageChaptersNeg-/Pos. Reversesingle-sided originalsdouble-sided originalssingle-sided copiesdouble-sided copies2in14in18in1Mixed OriginalOriginal Direction SettingsMargin Combine Originals
Combine Pages2in1,,, +++++
4in1, ,, +++++
8in1,, , +++++
Original
Mixed 
Original,,, +++++
Original
Direction 
Settings
Margin
Quality
Text,,,
Text/Photo,,,
Photo,, ,
Dot Matrix,,,
Downloaded From ManualsPrinter.com Manuals