Konica Minolta bizhub 420 User Manual

							Paper and Original Information10
bizhub 500/420/360 (Phase 3) 10-15
10.2 Originals
When making copies, position the original into the ADF or on the original 
glass.
To copy original that cannot be positioned into the ADF, position them on the 
original glass.
Unsuitable ADF Originals
The following types of original should not be positioned into the ADF, 
otherwise paper misfeeds, damage to the original or the machine trouble 
may occur.
-Wrinkled, folded, curled, or torn original
-Highly translucent or transparent original, such as overhead 
transparencies or trace paper
-Coated original such as carbon-backed paper
-Original printed on paper thicker than 129 g/m
2
-Original printed on paper thinner than 35 g/m2
-Original printed on paper thicker than 50 g/m2 during double-sided 
copying
-Original that are bound, for example, with staples or paper clips
-Original that are bound in a book or booklet
-Original that are bound together with glue
-Original pages that have been cut or contain cutouts
-Label sheets
-Offset printing masters
-Original with binder holes
-Original that have just been printed with this machine
Downloaded From ManualsPrinter.com Manuals 
						

							10Paper and Original Information
10-16 bizhub 500/420/360 (Phase 3)Positioning Original into the ADF
There are two methods for using the ADF. The machine will detect the 
original size automatically when the original is positioned in the ADF, then 
select an appropriate paper size automatically by Auto Paper Select 
function.
There are limits on the types of original that can be positioned with each 
method.
-Normal method
-For original of mixed sizes
-For Z-folded original
Normal method
Mixed Original Setting
The following chart shows the possible combinations of standard- size paper 
that can be used with the Mixed Original setting.
ItemDescription
Original paper weight Single-sided original: 35 g/m
2 to 128 g/m2
Double-sided original: 50 g/m2 to 128 g/m2
Original size 128 mm e 139.7 mm to 297 mm e 431.8 mm
Auto original size detect A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, B6 w, 11 e 17 w, 8-1/2 
e 11 w/v
Curling tolerance 10 mm or less
Paper capacity 80 sheets (80 g/m
2) or max. 11 mm
ItemDescription
Original paper weight Single-sided original: 35 g/m
2 to 128 g/m2
Double-sided original: 50 g/m2 to 128 g/m2
Auto original size detect Four types of size combination are determined by the ADF guide 
width.
Width of A3 w/A4 v:
A3 w, B4 w, A4 w/v, B5 v, A5 v
Width of B4 w/B5 v:
B4 w, A4 w, B5 w/v
Width of A4 w/A5 v:
A4 w, B5 w, A5 v
Width of A5 w:
A5 w, B6 w
Curling tolerance 10 mm or less
Paper capacity 80 sheets (80 g/m
2) or max. 11 mm
Downloaded From ManualsPrinter.com Manuals 
						

							Paper and Original Information10
bizhub 500/420/360 (Phase 3) 10-17Z-Folded Original Setting
ItemDescription
Original paper weight Single-sided original: 35 g/m
2 to 128 g/m2
Double-sided original: 50 g/m2 to 128 g/m2
Original size 128 mm e 139.7 mm to 297 mm e 431.8 mm
Auto original size detect A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, B6 w, 11 e 17 w, 8-1/2 
e 11 w/v
Curling tolerance 10 mm or less
Paper capacity 80 sheets (80 g/m
2) or max. 11 mm
Downloaded From ManualsPrinter.com Manuals 
						

							10Paper and Original Information
10-18 bizhub 500/420/360 (Phase 3)Positioning Original on the Original Glass
Use the original glass when originals are not suitable for use with the ADF, or 
when setting copying conditions incompatible with the ADF.
The machine will detect the original size automatically when the original is 
positioned on the original glass with ADF closed, then select an appropriate 
paper size automatically by Auto Paper Select function.
Observe the following precautions when placing the original on the original 
glass.
-The size of original printed on paper in inch sizes (such as 11 e 17, 8-1/2 
e 14, 8-1/2 e 11) cannot be automatically detected. The setting must be 
specified by the technical representative. For details, contact the service 
representative.
-If a custom-sized original is positioned, the Auto Paper Select and 
Auto Zoom settings cannot be used since the original size cannot be 
detected automatically. If a custom-sized original is positioned, select 
the size of the paper to be copied.
-If highly translucent or transparent original, such as overhead 
transparencies or trace paper, are positioned, the original size cannot be 
detected automatically. Place a blank sheet of paper of the same size 
over the original.
-Do not place objects exceeding 6.8 kg on the original glass, otherwise the 
original glass may be damaged.
-If a book is placed on the original glass, do not press it down extremely 
hard, otherwise the original glass may be damaged.
ItemDescription
Original type Sheets, books (spreads), three-dimensional objects
Original Size 128 mm e 139.7 mm to 297 mm e 431.8 mm
Auto Original Size Detect A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, B6 w, 11 e 17 w, 8-1/2 
e 11 w/v
Maximum original weight 6.8 kg
Maximum original thickness 30 mm
Downloaded From ManualsPrinter.com Manuals 
						

							11Supplies & Handling
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							Supplies & Handling11
bizhub 500/420/360 (Phase 3) 11-3
11 Supplies & Handling
11.1 When the Message Replenish Paper Is Displayed
If a tray has run out of paper while copying or after printing, the message 
Replenish paper. is displayed.
Check which paper tray appears highlighted in the touch panel, and then 
load it with paper.
-To load paper in tray 1/2, see To load paper in tray 1/2 (or tray 3/4) on 
page 3-54.
-To load paper into a paper feed cabinet PC-202 (tray 3/4), see To load 
paper in tray 1/2 (or tray 3/4) on page 3-54.
-To load paper into a paper feed cabinet PC-402 (tray 3), see To load 
paper in tray 3 on page 3-56.
-To load paper into a large capacity unit LU-201, see To load paper into 
a large capacity unit on page 3-59.
-To load paper into the bypass tray, see To load paper into the bypass 
tray on page 3-61.
Downloaded From ManualsPrinter.com Manuals 
						

							11Supplies & Handling
11-4 bizhub 500/420/360 (Phase 3)
11.2 Replacing Toner Cartridge
When the toner is about to run out, the warning message shown below is 
displayed.
Replace the toner cartridge. See To replace the toner cartridge on 
page 11-6.
!
Detail 
Some copies can be printed between the time that the message Toner 
Cartridge needs to be replaced. is displayed until the time that the 
message Replace the Toner. is displayed. However, it is recommended 
that the toner cartridge be replaced when the message Toner Cartridge 
needs to be replaced. is displayed.
When the toner is empty, the warning message shown below is displayed 
and copies can no longer be made.
Downloaded From ManualsPrinter.com Manuals 
						

							Supplies & Handling11
bizhub 500/420/360 (Phase 3) 11-5Display in Enlarge Display Mode
When the toner is empty, the following screen is displayed in enlarge display 
mode.
Touch [ ] to display the message enlarged.
7 WARNING
Precaution for the empty toner cartridge
If it is thrown into a fire, the toner may ignite and cause a dangerous situation.
%DO NOT THROW toner or the empty toner cartridge into a fire!
Downloaded From ManualsPrinter.com Manuals 
						

							11Supplies & Handling
11-6 bizhub 500/420/360 (Phase 3)
7 CAUTION 
Precaution for storing and handling the toner cartridge
If too much of toner is inhaled or toner gets in your eyes, your health may be 
affected.
%Keep the toner cartridge away from children.
%Be careful not to spill toner inside the machine or get toner on your 
clothes or hands.
%If your hands become soiled with toner, immediately wash them with 
soap and water.
%If toner gets in your eyes, immediately flush them with water, and then 
seek professional medical attention.
To replace the toner cartridge
0Use the same number toner cartridge as described on the label applied 
on the upper left side of the toner cartridge cover. Otherwise, machine 
trouble may occur.
1Open the machine front door, then 
open the toner cartridge door.
– When opening the toner cartridge 
cover, release the lock of the 
cover.
2Pull out the toner cartridge holder.
– Fully withdraw the toner cartridge 
holder straight toward the front 
until it stops.
Downloaded From ManualsPrinter.com Manuals