Canon Maxify Mb5020 User Guide

							•Characters other than machine name or IJ Scan Utility are displayed on  Created with
on the  Details  screen.•
"?" is displayed on the preview screen.
◦
Data edited or processed on a computer must be printed from the computer.
•
The specified PDF file contains unprintable data. Some portions may not be
printed.
PDF file which contain lot of graphics or hi-resolution images may lose that data or stop before
printing is completed. In this case, print from the computer.
•
Check the page size and tap [OK].
The size of the loaded paper is different from that specified in the paper size setting.
Load the same size of paper as that specified in the paper size setting, then tap  OK.
•
Power was not turned off correctly the last time. Press the  button when turning power off.
The power cord may have been unplugged last while the machine was still on. Tap  OK on the touch screen to dismiss the error.
Note
•
See Notice for Unplugging the Power Cord  for unplugging the power cord.
•
The power cord has been unplugged and unsent/received docs in memory have
been lost.
A power failure has occurred or the power cord has been unplugged when the faxes are stored in the
machine's memory.
Important
•
If a power failure occurs or you unplug the power cord, all faxes stored in the machine's memory are deleted.
•
For details on how to unplug the power cord, see Notice for Unplugging the Power Cord .
Tap  OK on the touch screen.
After tapping  OK, the list of the faxes deleted from the machine's memory (MEMORY CLEAR
REPORT) will be printed.
For details, refer to 
Summary of Reports and Lists .
•
Cannot connect to the server. Please wait a while and try again.
You cannot connect to the server due to some communication error. When you have tried to access a
photo sharing site, it is possible that your photos have been deleted.
Tap  OK on the touch screen to dismiss the error, then try again after a while.
Error Regarding Automatic Duplex Printing Is Displayed
1021
 
						

							Check See Cannot Print Properly with Automatic Duplex Printing  and take the
appropriate action.
Error Regarding the Power Cord Being Unplugged Is Displayed
The power cord may have been unplugged while the machine was still on.
Check the error message that appears on the computer, then click  OK.
The machine starts printing.
See 
Notice for Unplugging the Power Cord  for unplugging the power cord.
Important
•
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
Writing Error/Output Error/Communication Error
Check1
 If the POWER  lamp is off, make sure that the power plug is plugged in, then
turn the machine on.
While the  POWER lamp is flashing, the machine is initializing. Wait until the  POWER lamp stops flashing and
remains lit.
Check2  Make sure that the printer port is configured appropriately in the printer driver.
* In the following instructions, "XXX" signifies your machine's name.
1.
Log on as a user account with administrator privilege.
2.
Select items as shown below.
•
In Windows 8.1 or Windows 8, select  Control Panel from the Settings charm on  Desktop >
Hardware and Sound  > Devices and Printers .
•
In Windows 7, select Devices and Printers  from the Start menu.
•
In Windows Vista, select the  Start menu >  Control Panel  > Hardware and Sound  > Printers .
•
In Windows XP, select the  Start menu >  Control Panel  > Printers and Other Hardware  > Printers
and Faxes .
3.
Open the properties of printer driver for the machine.
•
In Windows 8.1, Windows 8, or Windows 7, right-click the "Canon XXX series Printer" icon (where
"XXX" is your machine's name), then select  Printer properties.
•
In Windows Vista or Windows XP, right-click the "Canon XXX series Printer" icon (where "XXX" is
your machine's name), then select  Properties.
4.
Click the Ports tab to confirm the port settings.
1022
 
						

							Make sure that a port named "USBnnn" (where "n" is a number) with "Canon XXX series Printer"
appearing in the  Printer column is selected for  Print to the following port(s) .
Note
•
When the machine is used over LAN, the port name of the machine is displayed as
"CNBJNP_xxxxxxxxxx". "xxxxxxxxxx" is the character string generated from the MAC address or a
character string specified by the user when setting up the machine.
•
If the setting is incorrect:
Reinstall the MP Drivers with the Setup CD-ROM or install them from our website.
•
Printing does not start even though the machine is connected to the computer using a USB cable and the port named "USBnnn" is selected:
In Windows 8.1 or Windows 8, select  My Printer on the Start screen to start  My Printer. If My
Printer  is not displayed on the  Start screen, select the  Search charm, then search for " My Printer".
Set the correct printer port on  Diagnose and Repair Printer . Follow the on-screen instructions to
set the correct printer port, then select your machine's name.
In Windows 7, Windows Vista, or Windows XP, click  Start and select  All programs , Canon
Utilities , Canon My Printer , Canon My Printer , then select Diagnose and Repair Printer . Follow
the on-screen instructions to set the correct printer port, then select your machine's name.
If the problem is not resolved, reinstall the MP Drivers with the Setup CD-ROM or install them from
our website.
•
Printing does not start even though the port named "CNBJNP_xxxxxxxxxx" is selected when the
machine is used over LAN:
Launch IJ Network Tool, and select "CNBJNP_xxxxxxxxxx" as you confirmed in step 4, then
associate the port with the printer using  Associate Port in the Settings  menu.
If the problem is not resolved, reinstall the MP Drivers with the Setup CD-ROM or install them from
our website.
Check3  Make sure that the machine is connected to your computer properly.
When the machine is connected to your computer with a USB cable, make sure that the USB cable is securely plugged in to the machine and the computer, then check the followings:
•
If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to thecomputer, and try printing again. If printing starts normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
•
There could also be a problem with the USB cable. Replace the USB cable and try printing again.
When you use the machine over LAN, make sure that the machine is connected to the network with a LAN cable or is set up correctly.
Check4  Make sure that the MP Drivers are installed correctly.
Uninstall the MP Drivers following the procedure described in 
Deleting the Unnecessary MP Drivers , then
reinstall the MP Drivers with the Setup CD-ROM or reinstall them from our website.
Check5  When the machine is connected to your computer with a USB cable, check
the status of the device on your computer.
Follow the procedure below to check the status of the device.
1.
Open the Device Manager on your computer as shown below.
1023
 
						

							If the User Account Control  screen is displayed, follow the on-screen instructions.•
In Windows 8.1 or Windows 8, select  Control Panel from the Settings charm on  Desktop >
Hardware and Sound  > Device Manager .
•
In Windows 7 or Windows Vista, click  Control Panel, Hardware and Sound , then Device Manager .
•
In Windows XP, click  Control Panel, Performance and Maintenance , System , then click  Device
Manager  on the Hardware  sheet.
2.
Double-click  Universal Serial Bus controllers  then USB Printing Support .
If the  USB Printing Support Properties  screen is not displayed, make sure that the machine is correctly
connected to the computer.
Check3  Make sure that the machine is connected to your computer properly.
3.
Click the  General tab and make sure that there is no indication of a problem with the device.
If a device error is displayed, refer to Windows help to resolve the error.
Other Error Messages
Check  If an error message is displayed outside the printer status monitor, check the
following:
•
" Could not spool successfully due to insufficient disk space "
Delete any unnecessary files to increase the amount of free space on the disk.
•
" Could not spool successfully due to insufficient memory "
Quit other running application softwares to increase available memory. If you cannot print yet, restart your computer and retry printing.
•
" Printer driver could not be found "
Uninstall the MP Drivers following the procedure described in 
Deleting the Unnecessary MP Drivers , then
reinstall the MP Drivers with the Setup CD-ROM or reinstall them from our website.
•
" Could not print Application name  - File name"
Try printing again once the current job is complete.
The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is
Displayed
If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, a confirmation screen asking for
permission to send the printer and application software usage information will be displayed every month
for about ten years.
Read the instructions on the screen and follow the procedure below.
1024
 
						

							•
If you agree to participate in the survey program:Click  Agree , then follow the on-screen instructions. The printer usage information will be sent via the
Internet. If you have followed the on-screen instructions, the information will be sent automatically from the second time onward and the confirmation screen will not be displayed again.
Note
•
When the information is being sent, a caution screen such as an Internet security screen may bedisplayed. In this case, confirm that the program name is "IJPLMUI.exe", then allow it.
•
If you deselect the  Send automatically from the next time  check box, the information will not
be sent automatically from the second time onward and a confirmation screen will be displayed at
the time of the next survey. To send the information automatically, see 
Changing the confirmation
screen setting: .
•
If you do not agree to participate in the survey program:
Click  Do not agree . The confirmation screen will be closed, and the survey at that time is skipped.
The confirmation screen will be displayed again one month later.
•
To uninstall the Inkjet Printer/Scanner/Fax Extended Survey Program:
To uninstall the Inkjet Printer/Scanner/Fax Extended Survey Program, click  Uninstall, then follow the
on-screen instructions.
•
Changing the confirmation screen setting:
1.
Select items as shown below.
◦
In Windows 8.1 or Windows 8, select  Control Panel from the Settings charm on  Desktop >
Programs  > Programs and Features .
◦
In Windows 7, or Windows Vista, select the  Start menu >  Control Panel  > Programs  >
Programs and Features .
◦
In Windows XP, select the  Start menu >  Control Panel  > Add or Remove Programs .
1025
 
						

							Note•
In Windows 8.1, Windows 8, Windows 7, or Windows Vista, a confirmation/warning
dialog box may appear when installing, uninstalling or starting up software.
This dialog box appears when administrative rights are required to perform a task.
If you are logged on to an administrator account, follow the on-screen instructions.
2.
Select  Canon Inkjet Printer/Scanner/Fax Extended Survey Program .
3.
Select Change .
If you select  Yes after you have followed the on-screen instructions, the confirmation screen will
be displayed at the time of the next survey.
If you select  No, the information will be sent automatically.
Note
•
If you select  Uninstall (or Remove  in Windows XP), the Inkjet Printer/Scanner/Fax
Extended Survey Program is uninstalled. Follow the on-screen instructions.
1026
 
						

							If You Cannot Resolve the ProblemIf you cannot resolve the problem with any of the workarounds in this chapter, please contact the seller ofthe machine or the service center.
Canon support staff are trained to be able to provide technical support to satisfy customers.
Caution
•
If the machine emits any unusual sound, smoke, or odor, turn it off immediately. Unplug the power cord from the outlet and contact the seller or the service center. Never attempt to repair or disassemble the
machine yourself.
•
Attempts by customers to repair or take apart the machine will invalidate any warranty regardless of
whether the warranty has expired.
Before contacting the service center, confirm the following:
•
Product name:
* Your machine's name is located on the front cover of the setup manual.
•
Serial number: please refer to the setup manual
•
Details of the problem
•
What you tried to solve the problem, and what happened
1027
 
						

							Support Code ListThe support code appears on the touch screen and the computer screen when an error occurs.
"Support Code" means the error number and appears with an error message.
When an error occurs, check the support code displayed on the touch screen or the computer screen and
take the appropriate action.
Support Code Appears on the Touch Screen and the Computer Screen•
1000 to 1ZZZ
10031200130013031310131313141575160016601688170017011754175518711890 •
2000 to 2ZZZ
200120022110212025002700280128022803   •
4000 to 4ZZZ
41004103    •
5000 to 5ZZZ
50115012504051005102510351045105520052035204520552065207520852095400550055015B005B015C01  •
6000 to 6ZZZ
600065006502670068006801690069016902691069116920692169306931693269336936693769386939693A6940694169426943694469456946 
1028
 
						

							•7000 to 2ZZZ71007200720172027203720472057300    •
9000 to 2ZZZ
90009500    •
A000 to ZZZZ
B202B203B204B502B503B504C000     
About the support code for paper jam, you can also refer to Support Code List (When Paper Is Jammed).
1029
 
						

							Support Code List (When Paper Is Jammed)If the paper is jammed, remove it following the procedure appropriate for each case.•
If the paper is jammed inside the front cover:
1300
•
If the paper is jammed inside the rear cover:
1303
•
If the paper is jammed inside the rear cover as the machine pulled in the printed paper:
1313
•
If the paper is jammed inside the rear cover when automatic duplex printing:
1314
•
If the document is jammed in the ADF:
2801
•
Cases other than above:
In Other Cases
1030