Canon Maxify Mb5020 User Guide

							Information about Network Connection
Useful Information about Network Connection
281
 
						

							Useful Information about Network Connection
Default Values Set at Factory (Network)
Connecting the Machine to the Computer Using a USB Cable
When Detecting the Printers Have the Same Name during Setup
Connecting to Other Computer with LAN/Changing the Connection Method
from USB to LAN
Printing Out Network Setting Information
282
 
						

							Default Values Set at Factory (Network)Default Values of the LAN ConnectionItemThe defaultChange LANDisable LANSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIP address  (IPv4 )Auto setupIP address  (IPv6 )Auto setupSet printer name *XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSDEnableTimeout setting1 minuteEnable/disable BonjourEnableService nameCanon MB5000 seriesLPR protocol settingEnableWireless LAN DRX settingEnableWired LAN DRX settingEnable
("XX" represents alphanumeric characters.)
* The default value in this item varies by machine. You can check the value in this item using the operation panel on the machine.
LAN settings
Default Values of the Access Point Mode
ItemThe defaultSSID  (access point name)XXXXXX-MB5000seriesWireless LAN securityWPA2-PSK (AES)PasswordSerial number of the machine
(XXXXXX is the last six digits of MAC address of the machine.)
283
 
						

							Connecting the Machine to the Computer Using a USB CableConnect the machine and the computer using a USB cable as the illustration below. The USB port is located
on the rear of the machine.284
 
						

							When Detecting the Printers Have the Same Name during SetupWhen the printer is detected during setup, you may see multiple printers of the same name on the detection
result screen.
Select a printer with checking the MAC address or the serial number set to the printer against that on the detection result screen.
Note
•
A serial number may not be displayed on the detection result screen.
To check the MAC address of the printer, print out the network setting information using the operation panel
of the printer.
Printing Out Network Setting Information
Additionally, you can check the network setting information on the touch screen of the printer. Select  WLAN
setting list  from Confirm LAN settings  in LAN settings  under Device settings , and check the item
displayed on the touch screen.
LAN settings
285
 
						

							Connecting to Other Computer with LAN/Changing the Connection
Method from USB to LAN
To add the computer connecting the machine with LAN or to change the connection method between the
machine and the computer from USB to LAN, perform setup with the Setup CD-ROM or perform it according
to the instructions on our website.
Connecting to Other Computer with LANTo add the computer connecting the machine with LAN, perform setup with the Setup CD-ROM orperform it according to the instructions on our website.
Changing the Connection Method from USB to LAN To change the connection method to LAN while you are using the machine with USB connection, perform
setup again with the Setup CD-ROM or perform it again according to the instructions on our website and
select  Change Connection Method .286
 
						

							Printing Out Network Setting InformationYou can print out the current network settings of the machine using the operation panel of the machine.
Important
•
This print out contains valuable information about your computer. Handle it with care.
1.
Make sure that the machine is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper.
3.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
The menu screen is displayed.
4.
Tap   Device settings .
5.
Tap LAN settings .
6.
Tap Confirm LAN settings .
7.
Tap Print LAN details .
8.
Tap Yes.
The machine starts printing the network setting information. The following information on the machine's network setting is printed out.
ItemExplanations of the itemSettingWireless LANWireless LANEnable/DisableConnectionConnection statusActive/InactiveMAC AddressMAC AddressXX:XX:XX:XX:XX:XXSSIDSSIDSSID of the wireless LAN/SSID of the access
point modePasswordPasswordPassword of the access point mode (8 to 10
alphanumeric characters)Communication ModeCommunication ModeInfrastructure/Access Point ModeChannel *1ChannelXX (1 to 13)EncryptionMethod of the Encryptionnone/WEP/TKIP/AESWEP Key LengthWEP Key LengthInactive/128/64
287
 
						

							AuthenticationMethod of the Authenticationnone/auto/open/shared/WPA-PSK/WPA2-PSKSignal StrengthSignal Strength0 to 100 [%]TCP/IP VersionTCP/IP VersionIPv4 & IPv6/IPv4IPv4 IP AddressSelected IP Address (IPv4)XXX.XXX.XXX.XXXIPv4 Default GatewayDefault Gateway (IPv4)XXX.XXX.XXX.XXXSubnet MaskSubnet MaskXXX.XXX.XXX.XXXIPv6 IP Address *2Selected IP Address (IPv6)XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *2Default Gateway (IPv6)XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet Prefix LengthXXXIPsec *3IPsec settingActiveSecurity Protocol *3Method of the Security ProtocolESP/ESP & AH/AHWireless LAN DRXDiscontinuous reception (wireless
LAN)Enable/DisableWired LANWired LANEnable/DisableConnectionStatus of the Wired LANActive/InactiveMAC AddressMAC AddressXX:XX:XX:XX:XX:XXTCP/IP VersionTCP/IP VersionIPv4 & IPv6/IPv4IPv4 IP AddressSelected IP Address (IPv4)XXX.XXX.XXX.XXXIPv4 Default GatewayDefault Gateway (IPv4)XXX.XXX.XXX.XXXSubnet MaskSubnet MaskXXX.XXX.XXX.XXXIPv6 IP Address *2Selected IP Address (IPv6)XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *2Default Gateway (IPv6)XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet Prefix LengthXXXIPsec *3IPsec settingActiveSecurity Protocol *3Method of the Security ProtocolESP/ESP & AH/AHWired LAN DRXDiscontinuous reception (wired
LAN)Enable/DisableOther SettingsOther settings-Printer NamePrinter namePrinter name (Up to 15 alphanumeric
characters)
288
 
						

							WSDWSD settingEnable/DisableWSD TimeoutTimeout1/5/10/15/20 [min]LPR ProtocolLPR protocol settingEnable/DisableBonjourBonjour settingEnable/DisableBonjour Service NameBonjour service nameBonjour service name (Up to 52 alphanumeric
characters)DNS ServerGetting DNS Server automaticallyAuto/ManualPrimary ServerPrimary server addressXXX.XXX.XXX.XXXSecondary ServerSecondary server addressXXX.XXX.XXX.XXXProxy ServerProxy Server settingEnable/DisableProxy PortSpecifying Proxy Port1 to 65535Proxy AddressProxy AddressXXXXXXXXXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
*1 Depending on the country or region of purchase, one of the channels from 1 to 11 is printed.
*2 Only when IPv6 is enabled, the status of the network is printed.
*3 Only IPv6 and the IPsec setting are enabled, the status of the network is printed.
289
 
						

							About Network Communication
Changing and Confirming Network Settings
Screens for Network Connection of IJ Network Tool
Other Screens of IJ Network Tool
Appendix for Network Communication
290