Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Command reference 
1057  
18
Modem Pool Group
Multifrequency-Signaling-Related System 
Parameters
Music Sources
Action Object Qualifier
add modem-pool num [1-MAX]
change modem-pool num [1-MAX]
display modem-pool num[1-MAX] [’print’ or ’schedule’]
list modem-pool num [’print’ or ’remove’]
remove modem-pool num [1-MAX]
Action Object Qualifier
change system-parameters multifrequency-signaling
display system-parameters multifrequency-signaling [’print’ or 
’schedule’]
Action Object Qualifier
change music-sources —
display music-sources [print or schedule] 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Command reference 
1058  
18
Packet Gateway Board
Partition Route Table
Pickup Group
Action Object Qualifier
add pgate Enter the circuit pack cabinet, carrier, and slot
change pgate Enter the circuit pack cabinet, carrier, and slot
display pgate Enter the circuit pack cabinet, carrier, and slot
remove pgate Enter the circuit pack cabinet, carrier, and slot
Action Object Qualifier
change partition-route-table[‘index’ (1-2000)]
display partition-route-table [‘index’ (1-2000)] [’print’ or ’schedule’]
Action Object Qualifier
add pickup-group 1-MAX (or ‘next’)
change pickup-group 1-MAX
display pickup-group 1-MAX [’print’ or ’schedule’]
list intercom-group [1-MAX][’number’ x][’to-number’ x][’count’ n] 
[’print’ or ’schedule’]
remove pickup-group 1-MAX 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Command reference 
1059  
18
PRI Endpoint
Remote Access
Remote Call Coverage Table
RHNPA Table
Action Object Qualifier
add pri-endpointextension or ’next’
change pri-endpoint extension
display pri-endpoint extension [’print’ or ’schedule’]
list pri-endpoint extension [’count’ X][’print’ or ’schedule’]
remove pri-endpoint extension
Action Object Qualifier
change remote-access —
display remote-access [’print’ or ’schedule’]
list remote-access —
status remote-access [’print’]
Action Object Qualifier
change coverage remote
display coverage remote
Action Object Qualifier
change rhnpa Enter RHNPA and office code n:xyy n(1-MAX) x(0-MAX) 
y(0-MAX) y(0-MAX) 
display rhnpa Enter RHNPA and office code n:xyy n(1-MAX) x(0-MAX) 
y(0-MAX) y(0-9) [’print’ or ’schedule’] 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Command reference 
1060  
18
Route Pattern
Second Digit Table
Security-Related System Parameters
Site Data
Action Object Qualifier
change route-pattern 1-MAX
display route-pattern 1-MAX [print]
list route-patternEnter [‘trunk’ (1-MAX)] [‘service’/feature name 
string] [‘print‘ or ‘schedule’]
Action Object Qualifier
add second-digit 0-9
change second-digit 0-9
display second-digit [print or schedule]
Action Object Qualifier
change system-parameters security —
display system-parameters security [‘print’ or ‘schedule’]
Action Object Qualifier
change site-data —
display site-data [‘print’ or ‘schedule’] 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Command reference 
1061  
18
Station
System Parameters Call Coverage/Call 
Forwarding
System Parameters Country-Options
System Parameters Crisis Alert
Action Object Qualifier
add stationextension (or ‘next’)
change station extension
display station extension [’print’ or ’schedule’]
Action Object Qualifier
change system-parameters coverage-forwarding —
display system-parameters coverage-forwarding [’print’ or ’schedule’]
Action Object Qualifier
display system-parameters country-options [’print’ or ’schedule’]
Action Object Qualifier
change system-parameters crisis-alert —
display system-parameters crisis-alert [’print’ or ’schedule’] 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Command reference 
1062  
18
System Parameters Customer-Options
Telecommuting Access
Tenant
Terminal Parameters
Action Object Qualifier
display system-parameters customer-options[’print’ or ’schedule’]
Action Object Qualifier
add telecommuting-access
change telecommuting-access
display telecommuting-access x[print or schedule]
remove telecommuting-access
Action Object Qualifier
change tenant x
display tenant  x[print or schedule]
Action Object Qualifier
display terminal-parameters 603/606/302B1 [print’ or ’schedule’]
display terminal-parameters 8400 [‘print’ or ’schedule’]
display terminal-parameters 6400 [‘print’ or ’schedule’] 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Command reference 
1063  
18
Terminating Extension Group
Time of Day Coverage Table
Time of Day Routing Plan
Action Object Qualifier
add term-ext-group1-32 (or ‘next’)
change term-ext-group 1-32
display term-ext-group 1-32 [’print’ or’ schedule’]
list term-ext-group [1-32][’number’ x][’to-number’ x]
[’name’ x][’ext’ x][’to-ext’ x][’count’ n]
[’print’ or ’schedule’]
remove term-ext-group 1-32
Action Object Qualifier
add coverage time-of-day 1 - 999
change coverage time-of-day 1 - 999
display coverage time-of-day 1 - 999
remove coverage time-of-day 1 - 999
Action Object Qualifier
display time-of-day [‘print’ or ‘schedule’]
display time-of-day 1-MAX (plan number) [’print’ or ’schedule’]
change time-of-day [time of day routing plan (1-MAX)] 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Command reference 
1064  
18
Toll Analysis
Trunk Groups
Vector Directory Numbers
Action Object Qualifier
change tollEnter digits between 0-9, ‘x’, or ‘X’ [‘min’ 1-23]
display toll Enter digits between 0-9, ‘x’, or ‘X’ [‘min’ 1-23] 
[’print’ or ‘schedule’]
list toll toll-list [‘start’ dialed-string] [‘count’ (1-1000)] 
[‘print’ or ‘schedule’]
list toll all [‘start’ dialed-string] [‘count’ (1-1000)] 
[‘print’ or ‘schedule’]
list toll 
restricted-call[‘start’ dialed-string] [‘count’ (1-1000)] 
[‘print’ or ‘schedule’]
list toll 
unrestricted-
call [1-10][‘start’ dialed-string] [‘count’ (1-1000)] 
[‘print’ or ‘schedule’]
Action Object Qualifier
add trunk-group 1–MAX (or ‘next’)
change trunk-group 1–MAX or TAC X...
display trunk-group 1–MAX [’number’ X][’to-number’ X][’count’ N] 
[’tac’ assigned TAC][’print’ or ’schedule’]
list trunk-group [’print’ or ’schedule’]
remove trunk-group 1–MAX or TAC X...
Action Object Qualifier
add vdn extension (or ‘next’)
change vdn extension
display vdn extension [’print’ or ’schedule’] 
						

							Phone reference 
1065  
19
DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
19
Phone reference
This reference section describes many of the telephones and adjuncts that you can 
connect to the DEFINITY ECS. 
Use this section to:
ndetermine where to connect a phone—is it analog, digital, or hybrid? is it 
designed for a 2-wire or 4-wire environment?
ndetermine whether a phone will fit your users’ needs—does it 
accommodate enough feature buttons? does it include a display?
nunderstand how to assign the user’s feature buttons—how do the buttons on 
the Station screen map to buttons on the physical phone. 
Because you need to know how the physical buttons on the phone relate to your 
button assignments on the Station screen, this section includes figures for those 
phones to which you can assign feature buttons. If you want more information 
about a particular phone or see a diagram of a phone that is not pictured in this 
section, refer to the DEFINITY ECS Terminals and Adjuncts Reference.
This section includes descriptions of the following telephones:
nMultibutton Electronic telephones (MET phones) (page 1066)
n500 telephones (page 1067)
n2500-series telephones (page 1067)
n6200-series telephones (page 1067)
n6400-series telephones (page 1071)
n7100-series telephones (page 1075) 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Phone reference 
1066 Multibutton electronic telephones 
19
n7300-series telephones (page 1075)
n731x-series hybrid telephones (page 1078)
n7400-series telephones (page 1083)
nISDN telephones (7500-series & 8500-series) (page 1100)
n8110 telephones (page 1105)
n8400-series telephones (page 1105)
nCALLMASTER telephones (page 1112)
nCordless telephones (page 1116)
nInternet Protocol (IP) SoftPhones (page 1119)
Multibutton electronic telephones
10-MET telephone
The 10-multibutton electronic telephones (MET) are basic phones that have 10 
feature buttons. You can assign call-appearances or features to the first five 
buttons. The last 5 buttons are fixed features.
20-MET telephone
The 20-multibutton electronic telephones (MET) are basic phones that provide up 
to 20 feature buttons. You can assign call-appearances or features to the top five 
buttons in the first column. The bottom 5 buttons in the first column are fixed 
feature buttons that you cannot change. However, you can assign features to the 
second column of buttons (10); these correspond to feature button assignments 1 
through 10 on the switch.
30-MET telephone
The 30-multibutton electronic telephones (MET) are basic phones that provide up 
to 30 feature buttons. You can assign call-appearances or features to the top five 
buttons in the first column. The bottom 5 buttons in the first column are fixed 
feature buttons that you cannot change. However, you can assign features to the 
second column (1 to 10) and third column of buttons (11 to 20); these correspond 
to feature button assignments 1 through 20 on the switch.