Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
647 Feature-Related System Parameters 
17
Controlled Station-to-Station Restriction
Enter the type of intercept treatment the caller receives when the call is placed to a 
restricted telephone.
Authorization Code Parameters
Authorization Codes Enabled
This field cannot be administered if Authorization Codes is not enabled on the 
System-Parameters Customer-Options screen.
!SECURITY ALERT:
To maintain system security, Lucent recommends that Authorization Codes 
be used.
Authorization Code Length
This field only appears and must be completed if Authorization Codes Enabled is 
y. This is the number of digits that must be assigned to the Authorization Code 
(AC) field on the Authorization Code screen.
Valid entries Usage
announcement
If announcement is entered, an associated extension number 
field displays. Enter the extension of the restricted telephone 
in the field.
attendantIntercepted calls are redirected to the attendant.
extension (may 
not be a VDN 
extension)If extension is entered, an associated extension number field 
displays. Enter the extension of the restricted telephone in 
the field.
tone  Intercepted calls receive intercept (siren) tone.
Valid entries Usage
y/n
 Enter y to enable Authorization Codes on a systemwide basis.  
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
648 Feature-Related System Parameters 
17
!SECURITY ALERT:
You enhance your system’s security by using the maximum length for your 
authorization code.
Authorization Code Cancellation Symbol
Enter the symbol a caller must dial to cancel the 10-second wait period during 
which the user can enter an authorization code. This field only appears when 
Authorization Code is 
y.
Attendant Time Out Flag
If this field is not enabled, the caller receives Intercept tone. This flag affects only 
remote users or incoming calls over trunks requiring an authorization code. This 
field only appears if Authorization Codes Enabled is 
y.
Valid entries Usage
4–13 digits Enter a number that defines the number of digits (length) in the 
Authorization Code field. 
Valid entries Usage
#
Enter the cancellation code # if the main and tandem switches 
are both the same type of switch.
1Enter the cancellation code 1 if an Lucent Technologies 
System 85 or DIMENSION PBX switch is part of the 
complex/network.
Valid entries Usage
y/n
Enter y if a call is to be routed to the attendant if the caller does 
not dial an authorization code within 10 seconds or dials an 
invalid authorization code.  
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
649 Feature-Related System Parameters 
17
Display Authorization Code
This field applies only to DCP, not to BRI or hybrid sets.
!SECURITY ALERT:
To enhance your system’s security, set Display Authorization Code to 
n.
Controlled Toll Restriction Replaces
This field activates the Controlled Toll Restriction feature.
Controlled Toll Restriction Intercept Treatment
This field applies an intercept treatment to a toll call during the call processing.
Valid entries Usage
y 
 Enter y to allow authorization code digits to display on the set 
during the dialing.
nEnter n if these digits should not display. 
Valid entries Usage
outward
station-station
none
The value that you choose for this field will be replaced by 
controlled toll restriction. In other words, if you choose 
station-station, you will not be able to use station-station 
restrictions unless you reset this field. 
Valid entries Usage
announcement
A sub-field appears to the right if announcement is used. If 
the entry is 
announcement, enter the assigned 
announcement extension. 
attendantIntercepted calls are redirected to the attendant. 
extensionA sub-field appears to the right if extension is used. If the 
entry is 
extension, enter the extension assigned to station or 
individual attendant.
tone  Intercepted calls receive intercept (siren) tone. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
650 Feature-Related System Parameters 
17
Field descriptions for page 4
Screen 88. Feature-Related System Parameters screen
System Printer Parameters
The system printer is the printer dedicated to support scheduled reports.
System Printer Extension
NOTE:
The eia option is not available for G3r.
Lines Per Page
Valid entries Usage
Data module extension 
number.Associated with the System printer 
eiaIf the DCE jack is used to interface the printer.
Valid entries Usage
24
 – 132  Enter the number of lines per page required for the report.
change system-parameters features   Page 4 of 10
                          FEATURE-RELATED SYSTEM PARAMETERS
SYSTEM PRINTER PARAMETERS
             System Printer Extension: ____                 Lines Per Page: 60
                  EIA Device Bit Rate: 9600
SYSTEM-WIDE PARAMETERS
                          Switch Name: ________________
MALICIOUS CALL TRACE PARAMETERS
               Apply MCT Warning Tone? n     MCT Voice Recorder Trunk Group: ___
SEND ALL CALLS OPTIONS
Send All Calls Applies to: station
Auto Inspect on Send All Calls? n
UNIVERSAL CALL ID
Create Universal Call ID (UCID)? n UCID Network Node ID: ___ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
651 Feature-Related System Parameters 
17
EIA Device Bit Rate
This field is not displayed for G3r.
System-Wide Parameters:
Switch Name
Malicious Call Trace Parameters:
Apply MCT Warning Tone
MCT Voice Recorder Trunk Group
Assign the trunk group for MCT voice recorders.
Valid entries Usage
1200
2400
4800
9600
Enter the required printer speed setting.
Valid entries Usage
Any keyboard 
character.Enter alpha-numeric characters for identification.
Valid entries Usage
y/n
Enter y to provide an audible tone to the controlling station 
when an MCT recorder is actively recording a malicious call.
Valid entries Usage
1
 to 99 group number 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
652 Feature-Related System Parameters 
17
Send All Calls Options:
Send All Calls Applies to
Auto Inspect on Send All Calls
Universal Call ID (UCID):
Create Universal Call ID (UCID)
UCID Network Node ID 
Enter a number unique to the switch in a network of switches.
Valid entries Usage
station
  If set to station, any call to that station, regardless of the 
number dialed, causes calls to that station’s own extension to 
be sent immediately to Coverage, or causes calls to different 
extensions assigned to the station as bridged appearances to 
become Ring-Ping notification if Redirect Notification field is 
y.
extensionWhen set to extension, only the calls sent to that extension are 
placed to coverage.
Valid entries Usage
y
If set to y, allows you to be presented automatically with 
Calling Party information for calls which are silently alerting 
their station because of the Send-All-Calls feature.
n  If set to n, you are not guaranteed a Calling Party display for 
calls sent directly to Coverage by the Send-All-Calls feature.
Valid entries Usage
y
If set to y, DEFINITY will generate UCID for each call when 
necessary.
n  If set to n, the DEFINITY will not generate a UCID for any call.
Valid entries Usage
1
 to 32767  This number is an important part of the UCID tag and must be 
unique to the switch. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
653 Feature-Related System Parameters 
17
Field descriptions for page 5
Screen 89. Feature-Related System Parameters screen
Public Network Trunks on Conference Call
Indicates the number of public network trunks allowed on a conference call.
Auto Start
If this field is enabled, the 
START buttons on all attendant consoles are disabled.
Conference Parties with Public Network Trunks
Specifies the maximum number of parties allowed in a conference call involving a 
public network subscriber. If the value of the Public Network Trunks on 
Conference Call field is 
0, this field will not appear on the screen.
Valid entries Usage
0
 to 5  If this field is 0, the Conference Parties with Public Network 
Trunks field will not appear on the screen.
Valid entries Usage
y/n
 Enter y to enable the Automatic Start feature.
Valid entries Usage
3
 to 6 
change system-parameters features  Page 5 of 10
                          FEATURE-RELATED SYSTEM PARAMETERS
 
    Public Network Trunks on Conference Call: 5     Auto Start? n
   Conference Parties with Public Network Trunks: 6     Auto Hold? n
Conference Parties without Public Network Trunks: 6     Attendant Tone? y
         Night Service Disconnect Timer (seconds): 180    Bridging Tone? n
   Short Interdigit Timer (seconds): 3    Conference Tone? n
              Unanswered DID Call Timer (seconds): ____    Intrusion Tone? n
              Line Intercept Tone Timer (seconds): 30    Special Dial Tone? n
Long Hold Recall Timer (seconds): 160
                      Reset Shift Timer (seconds): 0
Station Call Transfer Recall Timer (seconds): 0                      
                               DID Busy Treatment: tone
Allow AAR/ARS Access from DID/DIOD? _
Allow ANI Restriction on AAR/ARS? _ Transfer Upon Hang-Up? n  
           Abort Conference Upon Hang-Up? n Abort Transfer? n
7405ND Numeric Terminal Display? n            7434ND? n
DISTINCTIVE AUDIBLE ALERTING
Internal: 1   External: 2   Priority: 3
Attendant originated Calls:_ ________
DTMF Tone Feedback Signal to VRU - Connection: _ Disconnection: _ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
654 Feature-Related System Parameters 
17
Auto Hold
Conference Parties without Public Network 
Trunks
Enter a number to specify the maximum number of parties allowed in a 
conference call involving no public network trunks.
Attendant Tone
Night Service Disconnect Timer (seconds)
Enter a number or blank to indicate how long a trunk call can be unanswered 
during night service before being disconnected. The trunk must not have 
Disconnect Supervision for this timer to apply.
Bridging Tone
Short Interdigit Timer (seconds)
Enter a number to limit the time that digit analysis will wait for the next digit 
when it has predicted that all the digits have already been collected.
Valid entries Usage
y/n
 Enter y to enable the Automatic Hold feature on a 
system-wide basis.
Valid entries Usage
3
 to 6
Valid entries Usage
y/n
 Enter y to provide call progress tones to the attendants.
Valid entries Usage
10
 to 1024 
Valid entries Usage
y/n
 Enter y to apply a bridging tone when calls are bridged on 
primary extensions.
Valid entries Usage
3
 to 9 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
655 Feature-Related System Parameters 
17
Conference Tone
NOTE:
Bridging and Conference Tones are not supported by all countries. If these 
tones are enabled for countries other than Italy, Belgium, United Kingdom, 
or Australia, the tones will be equivalent to no tone (silence) unless the tone 
is independently administered or customized on the System-Parameters 
Country Options screen. 
Unanswered DID Call Timer (seconds)
Enter number or blank to limit how long a DID call can remain unanswered before 
routing to the DID/TIE/ISDN Intercept Treatment feature. This timer interacts 
with the nonadministrable 50 second Wait for Answer Supervision Timer 
(WAST). The WAST timer overrides this field. Thus if this field is set to a value 
equal to or greater than 50 seconds, the caller receives intercept tone instead of the 
normal attendant or announcement treatment that is given when the Unanswered 
DID Call Timer expires before the WAST. If the Unanswered DID Call Timer 
expires while the DID call is being processed by call vectoring, the timer is 
ignored. See Wait Answer Supervision Timer
 in this section.
Intrusion Tone
Line Intercept Tone Timer (seconds)
Enter a number to specify how long an analog station user can wait after hearing 
warning tone without going on hook, before the station is placed in the lockout 
state.
Valid entries Usage
y/n
 Enter y to provide conference tone as long as three or more 
calls are in a conference call.
Valid entries Usage
A number between 10and 1024  
blank A value of blank disables this timer.
Valid entries Usage
y/n
Enter y to apply an intrusion tone (executive override) when an 
attendant intrudes on the call.
Valid entries Usage
2
–60 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
656 Feature-Related System Parameters 
17
Special Dial Tone
Special dial tone notifies an analog-phone user if certain features are still active 
when the user goes off-hook. These features include:
nCall Forwarding
nSend All Calls
nDo Not Disturb
Refer to the DEFINITY ECS Application Notes for Type Approval for more 
information.
Long Hold Recall Timer (seconds)
You can administer the system to remind a user that a call has been on hold for too 
long. 
Reset Shift Timer (seconds)
Used only for station-to-station calls or private network calls using ISDN trunks.
Station Call Transfer Recall Timer
Allows a user-transferred call (station-to-station, a trunk call, or a DCS call) to 
re-terminate with priority ringing back to the station user who initiates the transfer 
operation if the transfer-to party does not answer the call within the administered 
Station Call Transfer Recall timer.
Valid entries Usage
y/n
 Enter y to use the Special Dial Tone. You must have a TN2182 
circuit pack. 
Valid entries Usage
0
 - 999 Enter a number between 0 and 999; 0 deactivates the timer. 
This value is the number of seconds a call can be on hold 
before the system re-alerts the user to remind them of the call.
Valid entries Usage
0
 - 255Specifies the number of seconds that reset shift dial tone is 
audible before busy tone is heard. Enter 
0 to disable this 
feature.
Valid entries Usage
0 
- 999Enter the time in seconds before a call redirects back to the 
station user who initiated the transfer operation. Enter 
0 to 
disable this feature.