Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
847 Packet Gateway Board 
17
NOTE:
The PGATE screen is used with G3r configurations.
Field descriptions for page 1
Screen 169. Packet Gateway Board 
Board Location
Enter the slot location of the PGATE circuit pack.
Name
Application
Display-only field that shows the communications protocol used to transmit 
messages over the PGATE.
External Cable Type
Display-only field that shows the type of physical interface between the PGATE 
port and the adjunct.
Port Configuration
Display-only field that shows that the port is configured for “rs232” 
communication. 
Valid entries Usage
1
-x cabinet (Maximum value varies according to switch type)
A-Ecarrier
0-20slot
Valid entries Usage
Up to 15 alphanumeric 
charactersEnter the name of the adjunct with which the 
PGATE circuit pack communicates. 
change pgate xxxxx
                           PACKET GATEWAY BOARD               Page 1 of 1
        Board Location: _____                       Name: _______________
           Application:  X.25
   External cable type: rs232
    Port configuration: 1) rs232  2)rs232  3)rs232 4)rs232 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
848 Partition Route Table 
17
Partition Route Table
Use this table to identify routing for partition groups associated with an ARS 
analysis entry.
Screen 170. Partition Route Table
PGN 1 (through PGN 8)
Enter the routing for each partition group associated with each route index 
number. 
Personal CO Line Group
Use this screen to set up a personal central office line trunk group.
Valid entries Usage
1
 to 640Specifies the route pattern used to route the call
r1 to r32Specifies the remote home numbering plan area table used to 
route the call
nodeDesignates node number routing
denyBlocks the call
change partition route-table Page 1 of X
 Partition Routing Table
Routing Patterns
Route
Index PGN 1 PGN 2 PGN 3 PGN 4 PGN 5 PGN 6 PGN 7 PGN 8
----- ----- ----- ----- ----- ----- ----- ----- -----
196 ____ ____ ____ ____ ____ ____ ____ ____
197 ____ ____ ____ ____ ____ ____ ____ ____
198 ____ ____ ____ ____ ____ ____ ____ ____
199 ____ ____ ____ ____ ____ ____ ____ ____
200 ____ ____ ____ ____ ____ ____ ____ ____
201 ____ ____ ____ ____ ____ ____ ____ ____
202 ____ ____ ____ ____ ____ ____ ____ ____
203 ____ ____ ____ ____ ____ ____ ____ ____
204 ____ ____ ____ ____ ____ ____ ____ ____
205 ____ ____ ____ ____ ____ ____ ____ ____
206 ____ ____ ____ ____ ____ ____ ____ ____
207 ____ ____ ____ ____ ____ ____ ____ ____
208 ____ ____ ____ ____ ____ ____ ____ ____
209 ____ ____ ____ ____ ____ ____ ____ ____
210 ____ ____ ____ ____ ____ ____ ____ ____ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
849 Personal CO Line Group 
17
Screen 171. Personal CO Line Group
The following fields are unique to this screen.
Analog Loss Group
This field determines which administered 2-party row in the loss plan applies to 
this trunk group if the call is carried over an analog signaling port in the trunk 
group. 
Coverage Path
Valid entries Usage
1
 to 17Shows the values from the loss plan and tone plan.
Valid entries Usage
1
 to 999Enter the number of the call coverage path you want to use for 
incoming calls.
t1 to t999Enter the number of a time-of-day table.
blank Assigning a coverage path is optional: leave this field blank if 
you do not want to assign one.
add personal-CO-line Page 1 of x
                            PERSONAL CO LINE GROUP
 Group Number: __ Group Type:_____________ CDR Reports: _
   Group Name: _________________   TAC: ____
Security Code: ____  Coverage Path: ____ Data Restriction? _
Outgoing Display? _
TRUNK PARAMETERS
Trunk Type: _____________ Trunk Direction: ________
Trunk Port: _______ Disconnect Timing(msec): ____
Trunk Name: __________  Trunk Termination: ______
Outgoing Dial Type: _________ Analog Loss Group: ___
Prefix-1? _ Digital Loss Group: ___
Disconnect Supervision - In? _ Call Still Held? _
Answer Supervision Timeout: ___  Receive Answer Supervision? _
Trunk Gain: ____  Country: __
Charge Conversion: _____
Decimal Point: ______
Currency Symbol: ___
Charge Type: _______ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
850 Personal CO Line Group 
17
Digital Loss Group
This field determines which administered 2-party row in the loss plan applies to 
this trunk group if the call is carried over a digital signaling port in the trunk 
group. 
Security Code
Trunk Direction
Trunk Port
Trunk Name
Valid entries Usage
1
 to 17Shows the values from the loss plan and tone plan.
Valid entries Usage
4 digits Enter a 4-digit code that users must dial to retrieve voice 
messages and to use the Demand Print Message feature.
blank Leave this field blank if you do not want to use a security code 
to control access.
Valid entries Usage
incoming
Enter the direction of the traffic on this trunk group. The entry 
in this field affects which timers appear on the Administrable 
Timers page. For WATS Group Types, only 
incoming or 
outgoing may be entered.
outgoing
two-way
Valid entries Usage
port address Enter the full address of the port for this trunk group.
Valid entries Usage
1 to 10 
charactersEnter a descriptive name for this trunk. Don’t use the group 
type (CO, FX, WATS) here. For example, you might use 
names that identify the vendor and function of the trunk group: 
USWest Local; Sprint Toll, etc. blank 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
851 Personal CO Line Group 
17
Field descriptions for page 2
Screen 172. Personal CO Line Group
Ext
This display-only field shows the extension of phones that have a CO Line button.
Name
This display-only field shows the name assigned to phones that have a CO Line 
button.
Field descriptions for page 3
Administrable timers for Personal CO Line groups appear on Field descriptions 
for page 3. Refer to ‘‘
Trunk Group’’ on page 967 for standard field definitions of 
the available timers. 
Related topics
Refer to ‘‘
Adding a PCOL trunk group’’ on page 345 for instructions.
Refer to ‘‘
Trunk Group’’ on page 967 for definitions of all trunk group fields that 
are not unique to the PCOL screen.
add personal-CO-line Page 1 of x
                            PERSONAL CO LINE GROUP
ASSIGNED MEMBERS (Stations with a button for this PCOL Group)
        Ext    Name                            Ext    Name
     1:  9: 
     2:  10: 
3: 11: 
     4:  12: 
5: 13: 
     6:  14: 
7: 15: 
     8:  16:  
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
852 Pickup Group 
17
Pickup Group
This screen implements call pickup groups with up to 50 extensions per group. A 
pickup group is a group of users authorized to answer calls to a phone extension 
within that group of users. A phone extension number can only belong to one 
pickup group.
Field descriptions for pages 1 and 2
Screen 173. Pickup Group 
Group Number
A display-only field when the screen is accessed using an administration 
command such as 
add or change.
Valid entries Usage
Enter a Pickup Group number when completing a paper screen.
change pickup-group 1 Page   1 of   2
         PICKUP GROUP
Group Number: 1 Extended Group Number: ____
GROUP MEMBER ASSIGNMENTS
    Ext     Name                             Ext     Name
 1: 51001   27 character station  51001  14: 51002   27 character station  51002
 2:                                      15:
 3:                                      16:
 4:                                      17:
 5:                                      18:
 6:                                      19:
 7:                                      20:
 8:                                      21:
 9:                                      22:
10:                                      23:
11:                                      24:
12:                                      25:
13: 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
853 PRI Endpoint 
17
Extended Group Number
This field appears only when the Group Call Pickup field is set to 
flexible on the 
Feature-Related System Parameters screen. The extended group is a collection of 
pickup groups that can answer calls from other pickup groups in the same 
extended group.
Ext 
Enter the extension assigned to a station.
Name
This display-only field shows the name assigned to the above extension number 
when the users and their associated extensions were administered.
PRI Endpoint
This screen administers PRI Endpoints for the Wideband Switching feature.
NOTE:
A PRI Endpoint with a width greater than 1 may be administered only if the 
Wideband Switching feature has been enabled on the System-Parameters 
Customer-Options screen.
A PRI Endpoint is an endpoint application connected to line-side ISDN-PRI 
facilities and has standard ISDN-PRI signaling interfaces to the system. For 
information on endpoint applications connected to line-side non-ISDN T1 or E1 
facilities, see ‘‘
Access Endpoint’’ on page 467 in this module.
A PRI Endpoint is defined as 1–31 adjacent DS0s/B-channels, addressable via a 
single extension, and signaled via a D-channel (Signaling Group) over a standard 
T1 or E1 ISDN-PRI interface.
Valid entries Usage
1
-100 (G3si 
and G3csi)
1-400 (G3r)Enter the extended group number or blank.
Valid entries Usage
An extension number. A VDN cannot be assigned to a Call Pickup group. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
854 PRI Endpoint 
17
Screen 174. PRI Endpoint 
Extension
A display-only field when the screen is accessed using an administration 
command such as 
change or display.
Name
Identifies the endpoint.
(Starting) Port
Enter the seven-character starting port of the PRI Endpoint.
Valid entries Usage
blank This is the extension number used to access the PRI endpoint. 
Enter a valid unassigned extension number when completing 
a paper screen.
Valid entries Usage
Up to 27 alphanumeric characters. 
Valid entries Usage
01
 through 22 (G3r) First and second characters are the cabinet number
01 through 03 (G3si)
01 through 02 (G3s)
add pri-endpoint next                                           Page   1 of   1
                                  PRI ENDPOINT
                     Extension: 300
                          Name: 27 character PRI Endpoint 1
               (Starting) Port:                          Width: 1
  Originating Auto Restoration? n              Signaling Group:
                           COR: 1                          COS: 1
                            TN: 1           Simultaneous Calls? n
             Maintenance Tests? y
                             WIDEBAND SUPPORT OPTIONS
                                H0? n
                               H11? n
                               H12? n
                             NXDS0? y   Contiguous? n 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
855 PRI Endpoint 
17
Width
Enter the number of adjacent DS0 ports beginning with the specified Starting Port, 
that make up the PRI Endpoint.This field cannot be blank.
Originating Auto Restoration
Signaling Group
COR
COS
A through EThird character is the carrier
01 through 20Fourth and fifth characters are the slot number
01 through 31 (DS1 Interface 
ports)Sixth and seventh characters are the circuit 
number
Valid entries Usage
1
 to 31A width of 6 defines a PRI Endpoint that can support data rates 
up to 384 Kbps. 
Valid entries Usage
y/n
Enter y to automatically restore calls originating from this PRI 
Endpoint (while maintaining endpoint call status) in the case of 
network failure if the call is over SDDN network facilities.
Valid entries Usage
1
 to 30Enter the D-channel or D-channel pair that will provide the 
signaling information for the set of B-channels that make up 
the PRI Endpoint.
Valid entries Usage
0
 to 95Enter class of restriction (COR) to determine calling and called 
party privileges
Valid entries Usage
0
 to 15Enter the Class of Service (COS) to determine the features that 
can be activated by, or on behalf of, the endpoint.
Valid entries Usage 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
856 PRI Endpoint 
17
TN
Simultaneous Calls
Maintenance Tests
H0
H11
Valid entries Usage
1
–20 Enter the Tenant Partition number.
Valid entries Usage
y/n
Enter y to specify that multiple simultaneous calls can be 
placed to/from the PRI Endpoint.
Valid entries Usage
y/n
Enter y to run hourly maintenance tests on this PRI Endpoint.
Valid entries Usage
y/n
Enter y to specify the ISDN information transfer rate for 384 
Kbps of data, which is comprised of six B-channels. When a 
PRI Endpoint is administered to support H0, the hunt algorithm 
to satisfy a call requiring 384 Kbps of bandwidth uses a fixed 
allocation scheme.
Valid entries Usage
y/n
Enter y to specify the ISDN information transfer rate for 1536 
Kbps of data, which is comprised of 24 B-channels. When a PRI 
Endpoint is administered to support H11, the hunt algorithm to 
satisfy a call requiring 1536 Kbps of bandwidth uses a fixed 
allocation scheme.